How to use the Feniex Quantum and the Feniex Quad Converter TOGETHER (it works) 

I have a couple questions, not sure if you will be able to answer them, but its worth a shot. 1 - How is it possible to sync the Quantum stuff with the QSSM lights using a Feniex 1. On Feniex's demo vehicle for their new Tahoe, it shows everything synced. However in the F1 software, you can not activate/program Quad QSSM stuff if you program ANY Quantum input to activate. How did they manage that, or are they using regular quad stuff like a GPL and calling it Quantum in the video? 2 - Or is it possible to wire the Quantum stuff, and the QSSM stuff to the data wires, and program it all under the Quad menu and program the Quantum bar as a GPL? 3 - If you use use a Quantum bar, like a 49" with the Converter, how do you also tie in a 600 Quantum Stick? How would all that stuff also sync with QSSM lightheads? 4 - In the Feniex One software, how do you set lightheads to Steady Burn, like Steady Burn Red and Blue. I only want to have one red and one blue to the front in slide switch 2. There are no steady burn options, so I am assuming set it to flood, and choose the color as red and blue for those heads? Same with the QSSM? I want to have the push bumper cross bar heads go steady red and blue in 2 and flashing in 3. I know you can also set it to cruise at 100%, but have heard that the cruise 100% is not as bright. 5 - I am assuming with the Quad Converter, using the Quantum software, you can use one wire to flash, say the rear corners and ends on Half-Half-Triple, and then I can program another wire to flash the lights next to the ends, in Half-Half-Single? I want to have the rear corners and end lamps flash on one pattern and have one pair of amber leds flashing a different pattern, like what Warn 1 would do for a Signal Master on a SmartSiren. In Position 2 it would add the steady burn to the front, and then another pair of amber to the rear like Warn 2 would do. And then in 3, it would add the entire bar flashing, and the rear 8 lamps flashing amber in a Half-Half-Single like Warn 3 would do. 6 - What overrides what? I would like to have a separate button activate white flashing. So in 3 on the F3, it would also activate a push button that would have some lights flashing RBW. The same set up would go for the QSSM. Activating another wire that would have the white programmed, would it override the wires that are already active with just RB flashing and add the RBW? It will be on a progressive switch, so power would still be applied to the flash patterns that are only RB. 7 - What exactly does cut-off override? I know on the list, as explained to me, its middle priority, meaning that anything below it will still activate? I want to have some white lighting activate in reverse and some red for brakes, however I was to have a blackout option on the vehicle for brakes and reverse. I don't want the stuff set to come on through OBDII on the F1 if they will activate regardless if the blackout switch is also set to "cut off" those heads. If cut off will still disable them, then I am good. I don't have any Feniex products right now, I am trying to plan out a build and see if it would work for my application, and trying to play around as much as I can with the Feniex One Software. I don't have a Quantum product, So I can access the programming on the Unlock Software so I can not see what is possible through it. I know I have a few more questions, but I can't think of them right now. Thanks for any help. I have tried to reach out to Feniex asking some, and it's been over a week and no answer, same with another distributer. So I am hoping you maybe able to help my curiosity.

Is there a quantom specific converter? Or quad converter works as the expansion for the quantom

I tried to switch patterns using the button on the quad convert but there was no change. Can I just hook up the green and white to the usb and do it on the computer while all the other are still connected to the converter

Hey guys! Could you guys do a demonstration of a 49 inch Quantum lightbar, showcasing all its features? Also, does it offer different degree modules (40, 60, 180, etc) like the previous lightbars from Feniex? Thanks!

If I order the 600 stick in duo Amber/White can I still have the red for brake mode? Or will it not work if the colour isn’t unlocked

Can I connect two lightbars to one converter? Is that how they will sync the lights together? And can I have a quad visor and a quantom rear bar together on the converter?

So if I have a dual color quantum stick (red and Amber) and I use the quad converter, does that unlock all 4 colors for use?

So will the quad converter add more inputs for the mini Lightbars that only come with 4 inputs? Like the quantum 18inch mini lightbar? Or does it only have 4 inputs