How to Use the Locking Bolt on a Non-Metal 2 Lacrosse Shaft | Mark 2V | StringKing 

1) Put your Mark 2V all the way onto the shaft, lining up the hole on the FRONT of the head with the pre-drilled hole on the BACK of the shaft.
2) Using the 1/8” drill bit, drill into the shaft through the screw hole on the back of the Mark 2V. Make sure to keep the drill straight so you don’t damage the head.
3) Remove the head from the shaft, and use the 3/16” drill bit to widen the hole you just drilled.
4) Replace the head, lining up the hole on the front of the Mark 2V with the new hole you just drilled in your shaft.
5) Insert the head fastener through the front and screw it in through the back.
6) Screw tight to lock your head in place.
The official head, shaft, & mesh supplier of the NLL & MLL
The #1 mesh in college lacrosse
Helpful Links:
Website · stringking.com/
Stringing Tutorials · uSTRING.com
Be Social:
Instagram · / stringking
Facebook · / stringkinglacrosse
Twitter · / stringkinglax
Snapchat · stringkinglax
#TheBestTrustStringKing
Proud Partner of:
National Lacrosse League · nll.com/
Major League Lacrosse · majorleaguelacr...
The Lacrosse Network · / tln
Epoch Lacrosse · / epochlacrosse