How to use XH-W3001 AC digital Thermostat Temperature control - Robojax

Подписаться 108 тыс.

Просмотров 74 тыс.

50% 1

Step by by step hardware explained, wiring explained, setting up as heater control or cooler control with demonstration
Here is the DC 12V or 24V version video • How to use XH-W3001 DC...
**** Free Course ***
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
The best thank you for me is to not to skip ads and Subscribe 🔔 to my channel, like 👍 the video It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe and enable the bell 🔔.😊
Visit resources for this video: robojax.com/L/?id=252
***Purchase XH-W3001 from affiliated store **
eBay: ebay.us/Qnj2Ij
Amazon USA: amzn.to/3qWqRPo
Amazon Canada: amzn.to/2WhJsqF
All other Amazon : amzn.to/3pZKxjz
Banggood: www.banggood.com/custlink/vm3...
AliExpress: s.click.aliexpress.com/e/_A2oupd
** Purchase Arduino Start Kit **
Amazon USA: amzn.to/3z88F9G or just UNO board amzn.to/3aY7KOL
Amazon Canada: amzn.to/31an88J or just UNO board amzn.to/3pYxSNN
Amazon Europe (all Europe): amzn.to/3pMCHge or Just UNO board amzn.to/2PgGItD
AliExpress: s.click.aliexpress.com/e/_9uc7Xe
Banggood: www.banggood.com/custlink/3GD... or UNO board www.banggood.com/custlink/vKm...
eBay: ebay.us/B1JWLi
***** Purchase Authentic Arduino Uno from ***
Amazon USA: amzn.to/2KApAwK
Amazon Canada: amzn.to/37LZ8sW
All Europe Amazon: amzn.to/36YDSzn
Jump to different section of video by clicking on the time:
00:00 Start
00:33 Introduction
01:40 Hardware Explained
05:21 Wiring Explained
07:53 Demonstration as Heater Controller
10:52 Demonstration as cooler controller
Related videos:
How to use DM-W3002 DC Temperature controller • How to use DM-W3002 DC...
How to use XH-W3002 AC Temperature controller • How to use XH-W3002 AC...
How to use DM-W3001 DC Temperature controller • How to use XH-W3001 DC...
Tutorial by Ahmad Shamshiri form Canada
****************************
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
Learn Arduino in 30 Minutes (video): robojax.com/L/?id=135
****************************
If you found this tutorial helpful, please support me so I can continue creating contents like this. Here is PayPal link paypal.me/robojaxTV
Follow me on Facebook robojaxTV
Follow me on Twitter: / robojaxtv
Follow me on Instagram: / robojax
Tutorial by Robojax.com
Get other projects code and learn Arduino
robojax.com/learn/arduino
#robojax #robojaxTemperature #robojaxXHW3001

Наука

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 130

@randallmuir5570 Год назад

Great advice, Bob. Thanks for the speedy and insightful reply. I plan to incorporate all of your suggestions when I take this new approach next spring. Looking forward to catching you in the store someday so I can shake your hand. My wife has kin in Gainesville and so we pass fairly close once in a while.

@theonlywaytogta6665 8 месяцев назад

Great video! I had been looking for a video that explains how to set up this temp controller exactly how you set this up. You even explained the circuit board and components. This video does it beautifully. Thank you for explaining how this works!

@MatthewCarlsen 4 года назад

Great video man! This is a very interesting and specific videos! I’m inspired by your high quality videos and your channel! I watched your video all the way through!

@robojax 4 года назад

I am pleased that you liked them. Thank you for watching.

@davidbewers4442 4 года назад

Xcellent video, answered all my questions... thanks

@robojax 4 года назад

You are welcome.

@muharraqi55 Месяц назад

Excellent explained

@RegnaSaturna Год назад

Very helpful. Thank you.

@tempsx92 4 года назад

très bien filmé....très bien expliqué..........simple et pro............thank you

@robojax 4 года назад

you are welcome.

@Luke-xt7rs 9 месяцев назад

Thank u so much sir

@sahana1430 3 года назад

Beautiful ❤️

@Ahk1 3 года назад

Thankyou 👍

@heartbeat1812 4 года назад

Nice explained

@robojax 4 года назад

thanks.

@francocarulli139 2 года назад

Perfetto funzionamento se si riesce a programmarlo

@kenrckmkai332 3 месяца назад

How can i get this and other equipment of connection for hatching accompany with this item

@christinafacts444 3 года назад

Thanks man! I thought I broke it, but I just had the high and low reversed so it didn't heat lol

@robojax 3 года назад

You are welcome. Good lock and Happy New year.

@carldb7374 3 года назад

Thank you. Can you use this to control water heater (geyser)?

@robojax 3 года назад

This is just a witch and it can turn in off anything

@beckskis 2 года назад

Great video, thanks for the explainer. Quick question. I noticed that the device has 22awg wire for those connections. It seems like that is undersized for 1500w. Have you load tested at the design limit?

@robojax 2 года назад

whatever tests I have done is shown in this video. Contact the seller or manufacturer in regards to the quality of wires.

@gregmann7936 4 года назад

Thanks Ahmad for your review of this temp controller. I need a temp controller one for my chicken egg incubator. Could you recommend which one would have the best tight temp control of those you've tested? I'd hope to control the temp to swing within 37.5 and 37.8 degrees centigrade. Thanks for all your reviews and time. Greg from Smartsville, Calif.

@robojax 4 года назад

You are welcome Greg. I have reviewed so many. All of them work well. some are for DC some on AC some also have humidity sensor. Here is a link that show some of them ru-vid.com/show-UCkcBSig_Iu4ZnAIeCeG1TVgsearch?query=temperature+AC

@AW-po7jr 2 года назад

Excellent explanation! You really helped me! Thank you!

@robojax 2 года назад

you are welcome. The best "Thank you" for me is to subscribe to my channel. Thank you

@heartbeat1812 4 года назад

Please make a video of load testing 1500watt 30A boost step up converter.

@robojax 4 года назад

I will make the video if get the module. Sure.

@mohamedothman6760 3 года назад

hello, what if the room temperature read is incorrect . what is the digit given when pressing both buttons at the same time? thanks

@robojax 3 года назад

you have so many "what". it is as if we say "what if your email goes to the wrong person". the reading will make sense. if you are in room with a shirt and comfortable, then you should know it is about 22 or 23 °C. If I mentioned to press both buttons, then that is the result (I don't it now as I have done 100s of more videos) and if not, then do not press both keys.

@weiry 3 года назад

If my extension cord has a ground wire, can that be used to wire this up? If so, does the ground wire just bypass this unit while the live and neutral go into and out of it?

@robojax 3 года назад

This is just a switch to connect and disconnect two wires. You have to use it in a safe way. Ground has nothing to do with this. Keep the ground , wire it such that it can turn on and off your device

@nizamm4908 2 года назад

Hello sir, I have a cloth dryer. The heater is rated at 220v, 1500w. I usually use the dryer for a period of 3-4 hours at a time. Would you recommend using this thermostat controller for this kind of application? I appreciate your opinion on this. One more question, does the min max value set holds if we switch it off? Thank you

@nizamm4908 2 года назад

Already used. Works perfectly

@didijiji918 2 года назад

Does the initial temperature setting keep the same after the power supply shuts off and then turn on again? I am trying to use it to control my condenser to run during the low temperature in winter. Thanks

@robojax 2 года назад

Yes it keeps it.

@aaronesquivel872 3 года назад

Could this be used for a reptile heat mat?

@robojax 3 года назад

my friend. I have explained the rating of relay in terms of Watt. so your load or mat should have power written on it. like 10W or 800W. it will turn it ON and OFF it is not buoyed the limit. if it is , it will cause fire.

@BlueLineofthesky 3 года назад

Hi.Thank you very much for all the information. I want to build a chicken incubator. The heating element is a 100 watt light bulb. Do I need a solid-state relay or it is enough with the setup you just show in this video? Thank you very much.

@robojax 3 года назад

you are welcome. this is always better because it has relay.

@BlueLineofthesky 3 года назад

@@robojax Thank you. So if I buy this thermostat I also need to buy a relay. Right?

@Azam_Pakistan 2 года назад

@@BlueLineofthesky I don't think so. The 220v model has a 1500w rating.

@taalwan4359 3 года назад

I bought this hoping it's 12v, but I received one marked 24v? Obviously I can't use that with 220V but can I use it with 12v? Thanks

@robojax 3 года назад

no. it will work only with 24V.

@RubysReef 3 года назад

Hello, Thanks for video. Is this device have a calibration factor? For example, the real room temperature 24 but device shows 25. Can we calibrate it ? Thanks.

@robojax 3 года назад

Hello, if it can such thing, I have shown it. I don't remember unless I watch it. So you watch it fully and see if it has or not.

@RubysReef 3 года назад

@@robojax hello, thanks for prompt reply, I watch the full video but couldnt see that you mention. So it doesn’t have it?

@robojax 3 года назад

If you didn’t see it then it does not have it. I have so many videos of thermostats, check my channel.

@brandonbaker8584 Год назад

What is the max power output. I have 4 heating elements. Small ones for soldering but won't heat all 4. A couple sure so thinking I must have maxed out the capability of the unit.

@robojax Год назад

I believe I mentioned the power handling value.

@brandonbaker8584 Год назад

@@robojax you did. And very clear. Just trying to figure why it would work 2 but hook up any more and nothing. No worries. I'll figure it out. Thanks though. 1200w. With 10 amp in a 120 walloutlet. Just so you know. I was listening. Not being lazy. And just writing to get answers. Have a good day

@pikas4 3 года назад

Will the thermostat be damaged if you connect the AC phase to the black wire? I am asking because in some European countries the plug is reversible, and the phase can be either on the left or on the right, in the electrical socket it is not marked.

@robojax 3 года назад

no damage. it is just for safety.

@richardd9867 3 года назад

Hi. Where the Yellow and black wires are could i add a double socket to it? or does it have to be a single? Its to run 2 heat mats. Cheers

@robojax 3 года назад

Hi, you made me watch the video . I have practically explained and shown how to use it. what else do you want? I did not understand.

@richardd9867 3 года назад

My question is in regards to the extrension you use, im your video you use a single extension My question is, could i use a double extension for 2 heat mats or will it over load the w3001?

@davew657 Год назад

Can I get/buy the 110v with Fahrenheit instead of Celsius ? If so, where ?

@robojax Год назад

search on eBay, Amazon or Aliexpress. Or very simple, build your own ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yJYXfaU9J34.html

@MrBrentles 4 года назад

Will it hold the values when turned off?

@robojax 4 года назад

I believe I've mentioned that. Yes it holds it. Perhaps I missed that to say.

@aminmoshfeghi8145 4 года назад

Hi dear friend my I ask where can I order this thermostat please Thanks

@robojax 4 года назад

Hi, We don't sell it. you can get it from Amazon, eBay or AliExpress.

@rahulmhaisgawali100 2 года назад

Can we use this for 3KW heater??

@robojax 2 года назад

I have shown the calculation. Do the calculation, find the current (ampere) = P÷V, P=power and V=voltage. I should not write it gain.

@deepakgurung3853 4 года назад

Is this product durable for longer use?

@robojax 4 года назад

you would have to use it to know.

@ramanverma2914 2 года назад

Sir mujhe high temperature pe supply start karna hai ,low temp pe supply off rahe.example 45℃pe fan start ho or 40 pe off .kya ye kam karega?

@robojax 2 года назад

@screamfingers 3 года назад

Hi can you use this to power an AC appliance? Thanks

@robojax 3 года назад

Have you watched the video? What did I show you? Please watch if you haven’t to get the answer

@screamfingers 3 года назад

@@robojax You said there was an AC to DC converter so it confused me.

@robojax 3 года назад

I don’t voice I have talked about converter. 😂😂

@screamfingers 3 года назад

@@robojax Lol dude you got the worst attitude how you talk to people. You absolutely said it.

@fajkusz 3 года назад

Hello. Maybe it's a stupid question, but can I connect a 300w electric Heather for the output instead of light bulb?

@robojax 3 года назад

Hello, I mentioned at the beginning that you can control AC or DC load. Load means fan, heater, TV or anything. just make sure do not go above the rated load of relay. Visit resources for this video: robojax.com/L/?id=252 and in your module see what is written on the relay. if is it 10A, connect only 10A load.

@fajkusz 3 года назад

@@robojax thanks for the quick replay!

@robojax 3 года назад

you are welcome.

@cesarosorio7578 3 года назад

Do you have 110 vol out too?

@robojax 3 года назад

no. the AC is to turn this device ON. it seems you haven't watched the video.

@jakevillanueva5126 3 года назад

Why the output is 24volts? What kind of bulb you use?

@robojax 3 года назад

you did not mention the time. This just use relay to turn ON/OFF something does not mater. I used a bulb to demonstrate it.

@Azam_Pakistan 2 года назад

What if we accidentally put the wall plug the other way? Interchange live and ground.

@robojax 2 года назад

it will function without any issue. expect it will be not safe to touch the output wires.

@mansiribrahim4744 8 месяцев назад

MY THERMOSTAT XH-W3001 is switching on and off after setting the starting temperature and ending temperature. Need your help pls

@robojax 8 месяцев назад

me be ON and OFF are too close. Set values apart.

@mansiribrahim4744 8 месяцев назад

Didnt get you pls @@robojax

@Infected0070 5 месяцев назад

Can it control 200 degree celcius temperature???? Please answer

@robojax 5 месяцев назад

It has been shown I the video. Please watch

@momazain8598 3 года назад

CAn we use it as a timer switch also? CAn we on and off a bulb if I want to work on day/light cycle? Plz guide Am a biochemist have no idea

@robojax 3 года назад

This is NOT a timer. I have times of this things. This is thermostat meaning it works with temperature. Search my channel

@robojax 3 года назад

You did not reply!

@recipewithrazia 3 года назад

Sir stc 1000 and w3001 which controller is best

@robojax 3 года назад

I make the video so you watch and see which one is good for application.

@recipewithrazia 3 года назад

@@robojax give me your video link

@didier6161 4 года назад

Bonjour, Est ce que je peux utiliser ce thermostat pour une résistance de couveuse de 150W? Merci pour votre réponse en Français si vous pouvez.

@robojax 4 года назад

Bonjour, Ceci est le contrôleur de température et la gamme qu'il convient d'utiliser pour l'incubateur. Cela n'a pas d'humidité si votre incubateur a besoin d'un contrôleur d'humidité. J'ai une autre vidéo qui montre un module qui a également un régulateur d'humidité. Merci de ne pas sauter les publicités et de continuer à les regarder. Cela m'aidera beaucoup.

@didier6161 4 года назад

@@robojax Bonjour, ok mais la puissance de 150 Watt de la résistance que j'ai pour ma couveuse conviendra quand même à ce thermo controler XH-W3001? à vrai dire je n'ai pas besoin que le taux d'humidité soi contrôlé car c'est géré par un autre système. Ce qui me préoccupe plus c'est l'adéquation controler et résistance?

@robojax 4 года назад

Ce module que vous essayez d'utiliser possède un relais. J'ai expliqué le classement des relais ici dans cette vidéo ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a8yJoeFsKWw.html

@tarunmahanta8408 2 года назад

Sir -degree per bhi kam karega

@robojax 2 года назад

English or Farsi please.

@aaronn6725 3 года назад

So this doesn’t need a adapter? This can be directly soldered onto a regular plug? Can you maybe show us your whole set up ? Such as your plugs and how everything was put together . I can’t find a single person that has showed the whole process showing everything

@robojax 3 года назад

Perhaps you skipped the video. the whole purpose of this video was to teach you that. Please watch and you will get answer to all of your questions.

@aaronn6725 3 года назад

@@robojax great video!!! It answered all my questions. That day I watched soo many videos that didn’t answer my questions so I just started to skip through other videos but I’m glad I watched this! Great video and thank you for sharing your knowledge!

@jackconcrete 4 года назад

Hi, There is no Need to correct the power ? How much is in Canada?

@robojax 4 года назад

I just watched the video and it has been explained. So please watch it without skipping. you just searched the model on Amazon, eBay or aliExpress to get it.

@jackconcrete 4 года назад

Robojax Thanks you!

@twilight_wolfe 3 года назад

My Thermostat is measuring impossibly high temperatures (such as 51.5°C) when my thermometer is measuring room temperature. It also doesn't switch my heating pad off (I'm using it for a reptile cage) when it goes above my stop temperature. I've tried using both its heating and cooling function and neither works correctly. When the black cable (with the probe on the end) gets near the box, it goes crazy and random temperatures start flashing up on the screen and it makes a clicking sound. Could you please help?

@robojax 3 года назад

Hello, I've not experienced such thing, I believe this module has defective.

@twilight_wolfe 3 года назад

@@robojax As it turns out, I simply didn't program it correctly, but it works now (however bringing the black cable near the box still causes it to go crazy). To program it I had to press the up and down buttons simultaneously for more than three seconds (if it displays 888 all is good, LLL means the sensor is at fault, HHH means the temperature is above range) After that, I simply followed the instructions in this video. Thank you for the help! (I used the third image by this link as a reference - ultimateexotics.co.za/product/temperature-controller-basic/)

@akshatamukunds 3 года назад

can this take on a 1.5/2 tone AC?

@robojax 3 года назад

What tone? I have explained and shown how to calculate. It is I just the rating of relay. First know the power of your device . If voltage is 220V and power of load is 1000W then find the current 1000W ÷220=4.5A . Watch the video and don’t skip. If you watch it fully , you will not have any questions left.

@akshatamukunds 3 года назад

@@robojax thank you for replying. I just wanted to know if I can install this device for and air conditioner.

@robojax 3 года назад

Okay check the power and do the math.

@vengaboyfarow6487 2 года назад

Memory wihout 230v?

@robojax 2 года назад

“Does it hold settings when power is OFF?” Yes it holds settings.

@loknathmahato1705 3 года назад

W3001 Temperature Controller Balp does not burn what

@robojax 3 года назад

did you mean "bulb"? and I did not understand what burns what? bulb does not burn W3001 and the w3001 does not burn the bulb.

@RafaelJrAbenasa Год назад

magkano kaya electric consumption nya?

@robojax Год назад

Farsi or English

@chocolate6437 4 года назад

Why there is 8 likes?????

@robojax 4 года назад

Perhaps my subscribers don't care about this product. However this is very famous product and soon non-subscribers will find it and we will see how they like it.