To remove the bumper of the Audi A6C7, you will need a Torx T25 and a 10-end head with an extension cord
Procedure for removing the bumper:
- unscrew 4 torx t25 screws in the wheel arches
- unscrew the bumper attachment to the wing with the head for 10, it is located in the depth, the bolt is not visible, you need to touch it
- 5 screws at the bottom and 2 screws at the top under the cover plate
- remove the bumper, for some reason it sat very tightly on the amplifier bar, but rocking it turned out to be removed
- disconnect 1 connector and the headlight washer hose
==================
My blog on Drive2 www.drive2.com/users/mark47/
3 июл 2021