How to Wet Sand, Compound, & Polish your Boat (1-Hour Class!)

Подписаться 3,6 тыс.

Просмотров 21 тыс.

50% 1

In this video, I will be breaking down how to wet sand, compound, and polish a boat. This is a masterclass type of video. Tune in for 1 hour and take notes on some amazing information you can use as a DIY boat owner or detailing business. All products we use are linked below. Enjoy! 😎
CLICK HERE 👉 ❗️linktr.ee/topdockpro❗️
📸 Follow us on Instagram
Daily videos and advice
topdockpro...
🔥 Check out our website and services?
www.topdockpro.com
🛥️ The BEST detailing supplies in one location
www.1percentdetail.com
💻 ONLINE BOAT DETAILING COURSE 👇
www.topdockpro.com/shop
📧 BUSINESS INQUIRIES 👇
topdockpro@gmail.com
🎵 Music: Deep House Music by Infraction
• Deep House Music by In...
-
-
-
1% Detail & Top Dock Pro are participants in the Amazon Services LLC Associates Program. We earn a small commission when you purchase from the links below ⬇️⬇️⬇️⬇️⬇️
_____________________________________________
👇 Products used in the video 👇
Section 1 - Wet Sanding
✅ Dawn Dish Soap 1percentdetail.com/products/d...
✅ Gloss Meter 1percentdetail.com/products/l...
✅ Abralon 500 6” 1percentdetail.com/products/m...
✅ Abralon 1000 6” 1percentdetail.com/products/m...
✅Abralon 2000 6” 1percentdetail.com/products/m...
✅ Griots Garage G9 Polisher 1percentdetail.com/products/g...
✅ Maxshine DA Polisher 1percentdetail.com/products/d...
✅ 6” Interface Pad 1percentdetail.com/products/m...
Section 2 - Buffing
✅ Dewalt Rotary Buffer 1percentdetail.com/products/d...
✅ Makita Rotary Buffer 1percentdetail.com/products/m...
✅ Buff & Shine Wool Pad 1percentdetail.com/products/b...
✅ Microfiber Applicator 1percentdetail.com/products/m...
✅ 3M Blue Tape 1percentdetail.com/products/s...
✅ Starke Level R Compound (Use Code: “TOPDOCK15” at checkout for 15% OFF) dmarinedetailsupply.com/produc...
✅ Buffing Spur 1percentdetail.com/products/t...
Section 3 - Polishing
✅ Flex 3401 VRG 1percentdetail.com/products/f...
✅ Rupes Millie 1percentdetail.com/products/d...
✅ Gray Lake Country FORCE Foam Pad marinedetailsupply.com/produc...
✅ Orange Lake Country FORCE Foam Pad marinedetailsupply.com/produc...
✅ Microfiber Applicator 1percentdetail.com/products/m...
✅ Rupes Foam Pad Spur 1percentdetail.com/products/r...
✅ Starke Elevate (Use Code: “TOPDOCK15” at checkout for 15% OFF) marinedetailsupply.com/produc...

Опубликовано:

18 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@mikeyvelez9314 Год назад

Great video! A lot of valuable information. Thank you for taking the time to do this

@topdockpro Год назад

My pleasure! Glad you enjoyed :)

@kdub7641 Год назад

Amazing coaching Simon!! Great video.

@topdockpro Год назад

Thanks! Be sure to check out part 2 next week!

@zeebassick Год назад

Thanks, helped a lot to understand the processes.

@topdockpro Год назад

Awesome!

@alexalves3329 7 месяцев назад

what an awesome educational video,im up in Massachusetts New England are its cold here but i can’t wait for spring time to do my boat like a pro,God bless you and your work and i really appreciate you sharing this knowledge buddy,,great stuff

@topdockpro 7 месяцев назад

Thanks means a lot! 🙌

@johnbrill1183 Год назад

Awesome video!

@topdockpro Год назад

Glad you enjoyed! ✌️

@7andresyto7 2 месяца назад

thank you for this amazing video

@topdockpro 2 месяца назад

Thank you 🙏

@skg420.8 5 месяцев назад

Ωραίος..😎🇬🇷

@topdockpro 5 месяцев назад

🙌🙌🙌

@derekbardon Год назад

Great video Simon! Can you wet sand and compound over vinyl decals/lettering?

@topdockpro Год назад

Yes but only with Mirka Abralon. Don’t spend much time on them

@itdafuzz Год назад

Very well thought out video! Do you ever use yellow wool pads when using Elevate? If I have this correct, the process is Sanding, Level R on white wool, Elevate on Grey/Orange foam so far. Great video! 👍

@topdockpro Год назад

Yes, there are times I will run the yellow wool with Elevate. However you would still want to follow up with a foam pad to get the best finish. That process works great with colors. So far you’ve got the process in the video nailed down 👍

@itdafuzz Год назад

@@topdockpro Thank you, I appreciate the reply!

@SupeRheyOfficial Год назад

Boss want to ask something, should we apply a clear coat after we do a gelcoat paint so that it will make really gloss and shine? Please really need to know 🙏 thank you. New friend here❤

@topdockpro Год назад

Not my line of expertise unfortunately. I can answer anything related to detailing

@Letizia4813 10 месяцев назад

I know you are using a DeWalt but I had a question on the Makita 9237C that I have. I was using a yellow Lake Country pad with Elevate the other day and after about 10 mins I went to pull the trigger on the polisher and it wouldn't start. I waited a few minutes and then it did start but the same thing happened again after a few minutes. Does that sound normal to you? Do these polishers have a thermal overload cutoff switch and do they frequently overheat?

@topdockpro 10 месяцев назад

They frequently overheat. In 5 years never have I had a Dewalt stop working due to overheating.

@doug2202 7 месяцев назад

On the Dewalt buffer what number on the speed control do you set it at for the different speeds you mentioned? Also what 3m compound do you use since that is the easiest for me to get

@topdockpro 7 месяцев назад

Start at 600 RPMs and work up to 1500 RPMs with 3M Heavy.

@romanrykun6967 3 месяца назад

I will be working on the boat, over all it is in good condition with light oxidation in one spot, I am thinking to sand the spot with 3000, Elevate on wool yellow pad and Ignition on Rupes yellow wool polishing pad, what do you think about it. Also what sealant you prefer, Jescar Ultra Lock or Starke Hyper hold? By the way thank you for discount at Starke website.

@topdockpro 3 месяца назад

3000 is nothing. It’s better to use 1000-2000 for gelcoat. Yeah I think that’s a good process. You’re picking hairs between Jescar and Starke. Mind as well use Starke and get the discount.

@topdockpro Год назад

Be sure to tune in next week for part 2! Sunday 9am

@drutt85 Год назад

How much mileage do you get out one of them p1000 Abralon discs ? They don’t come cheap but look the safest option.

@topdockpro Год назад

Not very much, a few sections. We just did a 47 hull and ran through almost 40 pads per grit! It’s by far the safest method and most effective

@laurazavatkay2782 Год назад

Great video! Thanks Simon. For a non-professional boat detailer, but a boat owner, what brand of gloss meter would you recommend? Where to buy? Great advice to document the gloss reading on various areas and compare it later in the season. Thanks!

@topdockpro Год назад

The gloss meter is linked in the description below the video! Glad you found the video helpful :)

@barrycowan1997 Год назад

What about using the purple foam/wool pad by lake country for polishing

@topdockpro Год назад

Yes, you could do that!

@barrycowan1997 Год назад

Awesome thank you. Great video

@IMAGO0N Год назад

nice vid, how many hours total did you put into this boat?

@topdockpro Год назад

I think I had right around 60 hours into the boat!

@kevinjamescerce Год назад

Great video. Would love to know how long overall this project took to complete and how much the customer paid

@topdockpro Год назад

About 7-day project. 3.5k is about what I charged

@sinisasoric5800 10 месяцев назад

Isn’t using sanding paper alone( one for water sanding) and just change papers?( need to have some soft pad on which you put just sanding paper). Much cheaper option and in the end you get the same thing?

@topdockpro 9 месяцев назад

It’s a similar result but a slower process. I’ve done it in the past. May need an extra round of compound to cut out the deeper hand scratches that a polisher won’t leave

@jeffeisenzapf4131 5 месяцев назад

What gloss meter are you using and where did you get it?

@topdockpro 5 месяцев назад

LANDTEK GM-6 GLOSSMETER GLOSS METER 60º - Amazon

@NaiDiGuy 10 месяцев назад

what about vinyl stripes and decals in regards to sanding/compounding/polishing

@topdockpro 10 месяцев назад

You’re good with abralon sanding, buffing, and polishing. Nothing to worry about

@aidanmurray11 9 месяцев назад

Great video, how different is the process with a painted boat instead of gelcoat?

@topdockpro 9 месяцев назад

It’s different for sure

@aidanmurray11 8 месяцев назад

@@topdockpro any chance you could do a video on the differences?

@topdockpro 8 месяцев назад

@@aidanmurray11 Checkout the chris craft series where I corrected paint. No wet sanding or buffing is involved with paints

@aidanmurray11 8 месяцев назад

@@topdockpro thanks👍🏽

@scubapro2689 Год назад

Would you be interested in traveling to Michigan and wetsanding/restoring my '91 Silverton 34c?

@topdockpro Год назад

It’d be quite the investment to travel that far haha

@user-jl6ur1il8f 8 месяцев назад

What type of platform are you standing on at 11 minutes in

@topdockpro 8 месяцев назад

Just the dock

@tylerdominiak3210 Год назад

Would this be same wet sand job on a fiberglass motorhome gel coat ?

@topdockpro Год назад

Yes it could be if it’s in really bad shape

@tylerdominiak3210 Год назад

@@topdockpro how can you tell when to change pad when the interface will hold water and kind of shoot white gel coat out of it kind of missing leading ?

@topdockpro Год назад

@@tylerdominiak3210 you can do 2-3 (3x3ft) sections and then you get a new pad

@tylerdominiak3210 Год назад

@@topdockpro where you buy your pads cheapest I see is about 32 for 20 pads you ever use abernate pad to cut fast and longer

@ryanlynch2064 Год назад

Is it possible in some cases to only have to use polish then wax? And not use the compound?

@topdockpro Год назад

It can be, if you take really good care of your boat. As a detailer it’s rare I work on boats like that

@ryanlynch2064 Год назад

@@topdockpro so most of the time it’s going to be a compound, polish, wax? What if the customer doesn’t want to pay for all 3 steps?

@ryanlynch2064 Год назад

@@topdockpro What im asking is it possible to do a 2 step process if either the customer doesn’t wanna pay for all 3 or the boats in decent shape?

@brock2298 Год назад

@ryan lynch I use Meguires 1 step Marine Compound/Polisher followed by a marine wax once a year and it keeps my boat pretty shiny. Spots with heavy oxidation I sometimes have to do twice, but other than that it works pretty good for me. I guess it depends on how oxidized your gel coat is.

@beebeebaszz8840 Год назад

Fake video!! Wet sanding is your last resort when jell coat is so oxidated that it powderise on the surface. All you need is a good wash, muriatic acid wipe, 2 - 3 passes with 7'' pad (finishing cut only on a boat with already a shine to it like this boat). After that use water and foam pad to create a perfect finish. If you're lazy just use soap to clean the polish residue whipe it dry and start waxing.

@topdockpro Год назад

Thank you 🙌