Not sure I understand why in this case the stopping mortar hasn't been colored to match the brick, surely that would avoid having to apply the wigging mortar (quicker, tidier finish & less risk of damaging the ribbons).
Interesting, I think it's fair to say that most of the buildings done like this, were built when bricklayers earned about 75 cents a day lol! I don't know who could afford it today...
It looks like a fantastic end result, after a lot of labour needing to be put in. As a Surveyor though, I can't say that it feels a sensible finish to have the protruding shelves collecting rainwater, especially in Ireland.
Known as '' Tuck Pointing'' in the UK. We used to do quite a bit of it in the 60s around Kent and the Medway towns. Used to take the masons/bricklayers ages.
I’ve seen tuck pointing in the U.K. where the flush mortar is coloured to match the brickwork, then the lime putty ribbon of a contrasting colour is added. It has the same end result as Wigging pointing but with fewer stages.
Indeed. they do the same in Australia- again with fewer steps as you say and its easier. In the U.S. throughout the 19th century this was done in an easier but more ephemeral way. They washed venetian red milk paint -more of a masonry stain- over all the brick work and did the tuckpointing over that. Remarkably it is still seen today though much weathered.
@@ajb7 am debating doing one of the two techniques atm. My thoughts were that 1) less likely to spoil the stopping layer whilst doing the ribbon so finish better & 2) wig method uses less coloured mortar & less skilled brickie can easily do the initial stages so mildly cheaper
Looks great when you finished . We do it a bit different . We point the first stage , the stopping morter the samebcolour as the brickwork then point the white ribbon after ...wau quicker as you don't have to go back and tidy it either side of the ribbon..
Good detail given,good masons, im a stone mason so rang a few bells with me. We called this style snail trail . We would go bk 2 days later or so n beat the lime bk into the joint b4 pointing up.
I had often wondered how this wigging pointing was achieved, this has been an eye-opener for me and just so interesting, Many years ago I worked with a skilled bricklayer and he showed me basic pointing using the 3 pot mixing system to get an even match over a large area,i also found i enjoyed doing it , But this is another level completely many thanks for this video.
That's amazing, I had no idea this was a way of pointing brickwork. I'm in the UK so no wigging here but I'll look out for its cousin tuck pointing now. There's an 18th century building near me that has rubbed brickwork on all the exterior walls - absolutely stunning - it looks very similar to this at a distance.
Lush...I've done a bit of this. Not so good for being under pressure...site agents screaming because of the lengthy time it takes but its gorgeous to look at and is so neat when completed.
This end result is found in many countries but the process varies. Coloring the mortar red, then tuckpointing (called pencil tuckpointing in The U.S. to differentiate it from common tuckpointing) was done which was easier than this method. Australia still has masons who do this. In the U.S. in the 19th century, the bricks and mortar were all stained with venetian red milk paint (more of a stain than paint), then lined with tuckpointing. This gave a very uniform appearance but it weathered away over the centuries. The red always had a bit of black added for a slightly more solemn appearance.
Skillful interesting work. Although Regrettably, many of our youngsters are far too busy with their 'Call of Duty' annihilation games. Perhaps real skilled work will be a thing of the past, to be viewed only 'online' or in a book. Thanks for posting your films on here. Liked, and subscribed.👍 Many thanks.👍
@@grrinc it's good to hear that Father and Son are both skilled trades men. If your Son has learned skilled work from you, then hopefully one day he will pass on his skills. As a man who worked with children in a school, I found that technology lessons; woodworking/metalwork etc were being stopped. The new computer aided design machines, CAD-CAM were being introduced. This meant that the children would program the machine, and the machine would do all the physical work. I send my kind regards to yourself and your son. Keep those great skills alive.👍👍
Tks for the comment Petesy. Tuck pointing (Englsih) uses the red mortar as the key. Using the white stopping mortar is what makes Wigging Pointing different and more difficult. It is an historic detail unique to Ireland (as far as I know)
Hi Mark, thanks for the comment. Have a look at our other video Historic Pointing in Ireland (see link below). This finish on Wigging and Tuck Pointing is exactly the same however the application differs. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jaTRPgc5oSg.html
@@andrewmorrissey8478 thanks for your reply I would like put the red on first as painting around would take forever! Unless there is a reason they're doing that.
We use this finishing technique in Scotland, usually on traditional stone buildings - in this part of the world, we call it Ribbon pointing. :) It serves the same purpose in titivating an otherwise poor quality/value surface finish into something more appealling.
I concur Craigy (?!) This technique is best to turn lower quality stonework into visually finer stonemasory, but for brickwork it seems a little contrived. But then, I'm in Canada, where our heritage is only veneer-thin. Looking forward to a pilgrimage to Scotland where the greatest stonemasonry tradition resides!
@@geoffreymckay6111 Your correct, and the brickwork being Ribbon/Wigging pointed, looks to have been built from reclaimed brick/seconds(again the titivating aspect). The home of stone masonry is somewhere in Africa, but it has long been obliterated by a meteorite impact 10 - 20k yrs ago that destroyed Atlantis(it is still visible on the West coast of Africa, and NPT the sub-aquatic BS stuff), that "blessed" Africa with the gemologically unique Tanzanite! BTW Canada is a lovely place(I went to live there for 3 months as a young man - Toronto), and it's much like Scotland, but much bigger! The Canadians also have a lot of Scots/Irish culture and I'm part Canadian on my maternal grand parents' side - you'd be made most welcome in Scotland(This is also why Canadians/Scots/Irish are also renowned for their hospitality ie an ancient cultural thing) :)
Well presented and informative video - a pleasure to watch. I have to ask the question though, "Why do this?" It may look visually pleasing to some, but is there any advantage to this style of pointing?
I agree lime is far best way ,as you said it lets the construction breath. But we were using a 6 sand 1 lime and 1 snow Crete very weak cement content so it don't over take the mix and still has lime properties . That 1 snow Crete makes so much difference to having to do away with baby sitting a pure lime mix for it to probably fail in freezing conditions ....still makes so much sense ...... But aye if your getting paid for it crack on.....these sort of projects are 90% of the time Heritage or lottery funded , as your average construction firm just wants it up
Tks for the comment. The Wigging style is very similar to tuck pointing but different as the stopping mortar and the ribbon is applied first and the colour applied up to the ribbon. This style is unique to Ireland.
Lovely work. Appreciate you must be sick of the mention of tuck pointing but does it not cut out a very slow stage of wigging in that the dye is applied when stopping out?
Yes, tuck pointing is less labour intensive and produces a similar end product (colour being installed first then the ribbon). The Wigging style of pointing, with the stopping mortar inserted first followed by the ribbon and colour, is a good bit more labour intensive and a style unique to Ireland.
Why not after rankings out old mortar, fill joint with a coloured mortar to match brickwork, with a centre key line ,then place the mortar pin line ,incorporating an adhesive in the pin line mortar as per way shown
Tks for the comment. The method you suggest is tuck pointing which is an English style. The finish however is very similar. Wigging pointing is an historic style of pointing unique to Ireland .
It almost looks faster to lay brick. I can't see this being as strong as tuck pointing because there seems to be unnecessary layers. Lovely result in the end though
Hi Peter, thanks for your comments and would add that that Wigging Pointing remains in place today one some of the Georgian buildings around Dublin is therefore testamount to its longevity. Am sure this is the case for Tuck Pointing too. Regards
Easier to rake out the old joints and the flush in the red cement so it's all one colour then mark out the joints and fill with the lime as opposed to putting the red cement on after....here in the UK we call it tuck pointing.
Very pretty but doesn’t the pointing catch rain and snow? I know lime mortars allow moisture to wick to the outside but I’m not convinced that this method is durable.
That would possibly be the most backwards way to achieve that result, In Australia we call that tuckpoining, it can also be done in a lime morter, But we would put the colour morter in first and then the tuck line, much better results and half the work
I think this method is preferred in Ireland because of how it wears down over time, the ribbon line is reinforced with the coloured mortar in either side which means more even wear and tear
Tks for the comment. This style of pointing however has been around since the 18th Century and although it weathers over time it remains for many years. rgds
Tks for the comments Ali. Have to make sure the existing brick is cleaned and damp prior to application. A good key is formed as long as the proper protection measures are applied as per standard when working with lime.
Very impressive craftsmanship but I cant help thinking there would be little demand for this. It looks so much more labour intensive that it must surely bump the price right up.
Tks for the comment Vinny. You're correct in that it is more labour intensive and hence more costly. The demand comes from the requirement (in Ireland) to reinstate to the historic detail.
Lime is a major pain so delicate and messy in bad weather, I always recommend using 1 snow Crete in the mix accelerates setting and is allowed to be used in heritage work, Makes sense aye
The problem with cement is it sets from a chemical reaction and lime sets through a re carbonation process and it allows the joint to breath cement doesn't and you would never be allowed use it in my line of work in historical restoration.
Tks Andy. Yes, tuck pointing produces a similar end product but involves colour being installed first then the ribbon. The Wigging style of pointing with the stopping mortar inserted first followed by the ribbon and colour is an historic style unique to Ireland.
