How to wiring STC-3028 temperature and humidity controller for incubator 

Thank you

Thank you for appreciating

Thank you

You are welcome

Okay

thank you

I make this one with instructions ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-54fB1KnuSpQ.html

You are welcome

you are welcome

It is only low limit and high limit it don't have internal setting

You are welcome

Thank you

You are welcome , it cannot connect fan only xm18 series can attach fan ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WS9NmhAf1Tc.html

Thank you

@@Umairworkshopnice job send me the link for the part so I can learn for temp control and humidity control thank you

@@noelnoel4916 please search on Google if someone selling in your country

@@Umairworkshop umair tell me all the components and parts needed

Thank you

Thank you

Thank you

It is setup for an incubator where temperature range is 37.5c to 38c and temperature is 55% to 60%

Thank you

Yes it can work with bath tub heater also

@@Umairworkshop thk kese hoga?

@@AHRFancyPoultry iska senosr alag say milta hai woh change karkay try karain

@@Umairworkshop please buy link send krden mughe ni mila

@@AHRFancyPoultry please see the description ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ga6L71qATKY.html

Yes it can also work for only one thing as well either temperature or humidity control

Please see this video full connection ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uOY0X1_4Y7Y.html

Thank you, I don't understand by pump control

An aquarium air pump blowing through a bubble stone in a container that is vented (tubing) into the chamber. I believe the Q deals with controlling multiple pieces of equipment in the Humidification circuit, so if that's the case, yes, you can wire a humidifier/mist maker, an air pump, and a blower fan using this humidity output. My suggestion is to power an outlet box (2 gang/4 outlet) using the Humidity output wire (I use Yellow wire) as the Hot wire and connect the two 2 outlet plugs together with a white wire. Label the faceplate of this box so somebody else won't try to use it as an extention cord after you move on! This allows anything plugged into the outlets to get its power from the Humidity (load) relay of the controller... and you can plug for example 110v gear in, or 12v with a plug transformer... all nice and neat.

Sirf Urdu walay hi samajhtay without speaking sub samajh saktay hain

Yes any heating element can be used instead of halogen bulbs

It is simple you need to connect it to the 12v fan with supply in place of heater and set the temperature to lower and off temperature to higher it will work as cooler to take out kerosene lamp heat outside

It is simple you need to connect it to the 12v fan with supply in place of heater and set the temperature to lower and off temperature to higher it will work as cooler to take out kerosene lamp heat outside

Yes it can be extended by joining wire but it might gives error in reading

So Umair can you hrlp me out

xhm452 is more accurate than htc1 you can try htc2 that is accurate but it still show 1 degree difference

@@Umairworkshop are you sure about xhm452 cause its risks 100+ eggs.

@@mishalmalik5328 it is common thing that xhm452 have better temperature and humidity sensor than htc 1 , because htc1 also give 1 degree difference with w1209 as well

You can choose xm18 series they can provide better results

What about power consumption. Is Xm-18 series good or do you have any suggestions. Jazakullahu khair.

@@ahmada.abdulrahman16 xm18 is complete system for incubator and it will use the power according to the need , you can place styrofoam sheets to reduce power consumption in incubator.

Sir fan nahi chahiye isko

It cannot work in rain but in sun it can work

@@Umairworkshop thank you

Sirf xm18d say uper version mein light aur fan ka option hai ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nuAeNu4skgQ.html

Fan humidity kaisay increase karega ,better use humidifier

I think it is the same wiring for that as well please read the manual before wiring

MashaAllah, everything I will use should be DC, that is fan, heat and turner, pls I need you guide Thanks Jazakullahu khair

@@ahmada.abdulrahman16 you can use 12v version and can connect 12v heater and fan with it

Stc3028 will switch off the humidity source if detect higher humidity

You need xm18 series of controller that use exhaust with fan and temperature with temperature

@@Umairworkshop do they the xm18 for 12 v systems?

@@tylercobb745 I think there might be a xm18 in 12v DC version

The sensor is for air humidity sensor it will not work in anything solid , you need soil humidity meter

Yes

It doesn't have a alarm sound

Yes can connect humidifier with this

@@Umairworkshop ah ok with same like that connection

The details in this video description ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h1l22KA8YWY.html

The fan is supposed to work all the time

It is called ultrasonic fogger floater you can make it like this way ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IL4fcQtTJf4.html

@@Umairworkshop thanks, new subscriber.

@@cilverfrz.252 You are welcome

Amazon - Mist Maker. Also buy the float as proper depth ensures proper function. I gave a description and review on my channel

Salam , here are the complete product information ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h1l22KA8YWY.html

@@Umairworkshop thanks

Salam , I think sensor issue hai

It is a humidifier with LEDs

Amazon "mist maker". Consider getting a float as well as they need to be positioned at the proper depth. A float allows for a deep water chamber (less refilling) but optimal operation depth. See tullyRiverQuail channel for homemade float and discussion on pros/cons of this option

I don't understand

Here are the details ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h1l22KA8YWY.html

It is faulty of circuit need to replace it

Use a battery bank backup surge protector

Okay

Because this controller relay the heater and humidifier by turning them on and off.

@@Umairworkshop ok now i get it sir 👍 how genius you are 👍 deserve like and suscribe also already follow you on facebook

@@canttouchme2036 thank you so much for appreciate

Stc3028 better hai iskay sath htc2 rakh saktay hain

@@Umairworkshop sir g is ka hal to bta day please reding mech nhi ho rahi htc or stc ki

@@muhammadshams3293 htc quick reading karta hai aur stc3028 buhut time baad accurate reading sow karta hai dono ko incubator mein rakhain ager 2 hour baad bhi same na ho reading tou apko scientific thermostat say calibration karna hogi

Jis ka sath wo pani main tar raha ha

All the details here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h1l22KA8YWY.html

These are the desings you can adjust the fans ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-72g636J-Uqs.html

Yeah temperature aur humidity maintain karta hai

Stc 3028 कंट्रोलर ची किंमत कीती आहे

floater set Hai name round thing name is foam

@@Umairworkshop ok Thanks brother

Yeah maximum 1000 watts Kay liye theak hai

@@Umairworkshop thanks sir

@@azizkhan4864 you are welcome

You can search on Google there are lot of sellers of this product

Here is the more simple wiring ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Y9L0-3E7XBc.html

It is good for upto 1000 eggs

@@Umairworkshop somebody say temperature error come if more than 100 eggs

No temperature stays same if proper air circulation there

The power relay is only 10Amp. So depending on the current requirement of your heating element will determine how large chamber this will service, or you can wire it with the heaters power source providing its power, not the relay in the controller.

For 18 days you need to keep around 70% and last days increase to 80%

@@Umairworkshop tq sir

It only work on one thing at one time either humidifier or dehumidifier

As I thought, although some sellers claim that the device can control both at the same time... in fact my doubt was that since there is only one relay for the humidity output... it could not do it. The solution therefore is to use 2 stc-3028 and thus have 2 ways for heating/cooling and humidifier/dehumidifier.

I will upload wiring on stories and Facebook page

Yeah m452 KY sath bhi work karega , supply need DC 24v 2 amp ,yeah kharab ho jata hai tou iski disk change ho jati hai

Sensor issue hai ya ic problem ho sakta hai

It cost under 2500 in market

It is Price is around 2500 in market

Can place any wire but if need than 220v is live wire and ground is neutral wire

It is available online or electric market

Hi

@@Umairworkshop ,😀

These circuits are low quality

Just showing how to connection

I don't understand

Stc 3028 doesn't have direct relay like stc1000, it need to be wired like this and it is going to be used away from controller so wires are necessary.

@@Umairworkshop I got it working. On the model I have live #1, then bridge to #7 and from #7 to #9. Live out 8 and 10. Neutral joined together from #2. I'll post an image link of how I worked it tomorrow.

Please of the sensor issue or it goes above set temperature

@@Umairworkshop Simultaneously shows LLLL LLLL for temperature and humidity in both displays

@@youtubekanal1123 please try to change the sensor wire

@@Umairworkshop The sensor connector was not plugged in properly

The sensor connector was not plugged in properly

Thank you

Please see the description of this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3Db2cEvNfAw.html

Thank you