How to wrap a stone 🪢 

What you need:
Macramé board
Cord 0.8mm flat waxed
Lighter
Scissors
Attach the cord as shown in the video.
Wrap the lighter tightly with yarn to prevent it from slipping.
(I find this method easier but it is not a must).
Tighten the thread from the lighter with the second thread on the board and go over the thread on the other side, then under it and through the loop.
Next, tighten with the lighter under the thread, then over the thread and through the loop.
Now repeat the knot on the other side.
This process is repeated until the net is long #macrametutorial #diycraft enough for the stone.
Then take the net from the board and place it around the stone and knot the ends.
Finally, cut the threads short and fuse the threads on the back with the lighter. Now pull the front threads back with the needle, cut them short and fuse them with the lighter
#macrametutorial #knots #stoneart