How To Zero The Pard NV008 

this is my favorite video on zeroing the PARD008.

I am the owner of the Pard nv008 p for about 4/5 months, and recently I have experienced that it is changing reticle coordinates on its own. First I thought that maybe I did it by mistake, but when I’ve re-zeroed it, couple of days later I noticed that Y coordinate is “dropping” for two degrees (from -50 to -48 and then to -46 and -44) I contacted the salesman so he will send it to manufacturer in few days, but I was wondering is it some kind of software error and did any of your costumers or you guys watching this video had similar problems?

Just awaiting my nv008P lrf to use on an Air arms S400 which would be very similar to that used in this video. Whilst filming this, what mounting did you use as Im aware there are issues with the supplied mount. My Airarms is still an 11mm dovetail Thanks Jamie

How do you then center the cross hairs on the screen, as with your zero check moved it down and to the left of center. Or if you want to adjust the whole scope to get the cross hairs center of screen again, how do you achieve this? Cheers.

Best day or night haunting scop your choice reply please help me

I do the same thing but my reticle doesn’t move ? Any idea on what to do just got it today

Hi. I have problem with my pard008 My pard 008, i sett the zero retcle, and i pres save..., if it turn off, the all of setting is default setting.. cannot save thw retcle asdjustment,, how did i fix my problem ? Please help

Why does Pard do such a poor job of things in the manual? Further, there is a “Pard shim” listed that will lower the scope. Why is it IMPOSSIBLE to find?

Hello, if we zero the camera at a distance of 50 meters, at different distances such as (70-100-150 .... meters) we have to calculate the drop of the bullet or it does it automatically, please help

I ordered nv008 , should I zero the scope every time I change or charge the battery??

Hello friend, after adjusting my device, there is a deviation in X and Y coordinates, what could be the reason?

hello, at what range did you carry out this test ? is the picture quality this good at 35 yards ? regards paul

Pard sits too low to my AGT vixen. How can I raise the pard for better eye relief ?

Hello, if we zero the camera at a distance of 50 meters, at different distances such as (70-100-150 .... meters) we have to calculate the drop of the bullet or it does it automatically, please help

How about the cross ...should be the target on the cross at deferent range?

Howdy from Sacramento! Really appreciate the simple and clear instructions. Headed to the range to zero my Pard on my Ruger 10/22 and will have this video queued up. Thanks again!

I have just ordered the NV007 which arrives this Friday. Is the reticle setup the same as the NV008 or is it totally different?

what distance/range was that done at? And then how does one then cater for varying ranges after that?

Mantap ❤

when i have zeroed on 1 rifle is it the same when i change to another rifle?

Hi great and helpful video. but I have one problem. I can see reticle while shooting but when I play video record of my shoot there is no reticle. I don`t know how to turn on reticle to be visible on recorded video so I can see where did I hit can some one help?

Hi, tell me, can this gunsight withstand this gun for example 243 caliber ????

I set mine up for about 15 yards for ratting in a smallish chicken shed, but when going to 25 yds the pellet travels about 3” too high, so I set it up at 25yds and anything closer or further away I miss by a lot, what am I doing wrong? It’s not like a normal scope where you just shoot a little higher or lower. It’s baffling me.

Hi. I need your help. Buy on Ebay the PARD NV008 and PARD NV007. Excellent night vision scope .... My question is there a new version of firmware for the PARD NV008 and NV007 PARD. THANK YOU FOR YOUR HELP.

En español

Excellent simple instructions.

if possible can you do a demonstration on zeroing the sytong ht 60 ther isnt one i can locate and im sure there are many others struggling as there is no information in the unit. many thanks.

What if your first shot is high and left/right?

..thanks for the tutorial dude

How much is the non LRF NV008? £ Cheers

whether the Pard008 is under a pressure of 22-250rem or 223, stable, does not shut down, simply does it work,

Hello. I need a little bit of help? I have pard nv 008 and the problem is when I shoot sometimes it turns off. It is mounted on 30 06 semiautomatic rifle. Do you now maybe what to do? Thanks

What distance you use when zeroing?

Please help how to zero nv008P?

Pard nv008s is that same as this or is much difference ?

👍😉

Have you REALLY had people ring up and ask??

Hello! Could you tell me how to switch this device between video and photo mode? I can't find any information about that. Thanks in advance.

How are the mounts? Are they return to zero for swapping to day scope

Great video

Am I right in thinking this scope is not as good as the 007 in the day then with it being a night dedicated scope