HowardMiller grandfather clock chiming issue

Подписаться 48

Просмотров 26 тыс.

50% 1

We inherited an 80's vintage Howard Miller grandfather clock. When it came to us, it was not working. I got him going, but the chiming is erratic. I now have COVID and I have some time so I am trying to figure this puzzle out.
1. I have not taken this clock apart. I know enough to know what I don't know
2.It seems that when the short arm hook drops into the cut out on the middle cam . . . the warning mode stops . .. and the arm that actuates the hour chims lifts and drops at chime time.
3. As you can see i the video . . SOMETIMES it goes into warning mode with the short arm dropped, chimes for a few quarters then drops.
Any suggestions??

Опубликовано:

25 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@constructionking7399 8 месяцев назад

Wow, I'm having the exact issue with my newly inherited clock. Keeps time fine but hit and misses on the chime. I'd like to know what you find out! I can put a little pressure on the gear and unstick it ever time it doesn't chime and then it works well for about 3 chimes. Then sticks again 🤷

@DawoodMohamed-h8q 10 месяцев назад

How to solve the complaint please explain

@jordanbusby6231 Год назад

The only thing I can figure is your center cam star is worn causing the levers to not be lifted up enough

@Jadenreyes1014 Год назад

We’re having trouble with ours, we just got a new movement installed and it won’t stop chiming.

@nathanjagielski6715 Год назад

I'm working on the same movement that's doing the same thing. Were you able to figure out the problem?

@patrickcasey330 Год назад

There is lots of slop in the mechanism that operates the chimes. I concluded that it was worn out. Probably needs bushings. The equipment to replace it cost way more than buying a new movement. I turned off the chiming because it was not working right and it irritated me. Will probably replace the movement one day.

@KevinLyons-gn7eu 6 месяцев назад

@@patrickcasey330 maybe you have your clock on silent that way it won’t strick and chimes ever hour

@patrickscanlan9567 8 месяцев назад

I have the same issue with my Ridgeway clock which I believe is the same movement as the Howard Miller video. Can anyone show how to correct this issue with the chime stopping one time around a four quarter sequence? The lever is dropping down and stopping it from chiming just as seen in the video.

@patrickcasey330 8 месяцев назад

I concluded that the movment was worn out, at least where the chiming is concerned. An old clock repair guy told me the same. They have bushings in the brass plate. If they are not lubricated and cleaned at somewhat regular intervals that do wear out. This was my MIL's clock that we inherited. It keeps time fine but it gets lost chiming. I may pick up another service for it, and install when I retire and get bored.

@constructionking7399 8 месяцев назад

@splittieful 2 месяца назад

There is no problem with it, the clock knows if the chimes are not correct

@thomasbaird4200 7 месяцев назад

Kidding right? Stupid to show it not working without showing how to fix it!

@patrickcasey330 7 месяцев назад

Well rocketman - why don't you look at my replies. If you looked at any of them you would have seen that I could not fix it. The movment is worn out.

@jeneannebrown1944 11 дней назад

Yes

@CHevman468 9 месяцев назад

Well this was a wasted video with no explanation

@patrickcasey330 8 месяцев назад

Obviously you did not read the whole thread . . . I said "There is lots of slop in the mechanism that operates the chimes. I concluded that it was worn out. Probably needs bushings. The equipment to replace it cost way more than buying a new movement. I turned off the chiming because it was not working right and it irritated me. Will probably replace the movement one day."