HowTo: Install Drain Plug Underwater LED Lights On Your Boat Transom

Подписаться 20 тыс.

Просмотров 98 тыс.

50% 1

This is a step by step how-to video showing the installation of underwater LED transom lights with no drilling required. The lights fit through the drain plug hole and are easy to install or simply connect to your battery. They are available from RunninHotRacing on eBay. You can find them here: stores.ebay.co...

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@ryanwalsh5305 3 года назад

So from an electrician input, if you use the proper environmental splices which shrink and seal with silicone you won't get moisture in.

@steveandrews1982 9 лет назад

That's nice. You won't loose drain plug no more when you have wires hooked to it.

@DanielScheerHowTo 9 лет назад

+Steve Andrews I still carry the old plug just in case. lol

@lifeliver9000 2 года назад

Another no hull hole option is mounting on top of trim tabs. You need to get ones that operate out of water but you get some serious bright ones.

@beaubobbitt67 3 года назад

So it doesn’t swivel when tightening or loosening the plug? How bad does it twist the wires and what kind of longevity do you think will come from the wires being twisted like that?

@toddbs1 7 лет назад

thanks for the video and nice boat

@TBrownRecords 4 года назад

Cool video

@rexrunner 2 года назад

Wire nuts are for solid wire lol. You crimp to gain surface area of a wire for the amperage and vibration. But yeah safe boating

@willcongdon114 3 года назад

Good cleaning and seal on that boat would go a long way. I have this same light and u will burn it out leaving it in out of the water for very long.

@yamada537 9 лет назад

my boat is a 1976 ive never noticed threads where the plug goes in but i put my plug in from the inside could i use one of these im new to boat lights im more of a classic boater but i want a little somethin fancy for the camp next summer

@joejosephs8446 9 лет назад

Looks easy to do... now that you've had them for a while are the LED's still workin? Are ya still happy with the product?

@DanielScheerHowTo 9 лет назад

+Joe Josephs I love the lights. They are not as bright as previous leds on my other boat... but still give the desired effect and no holes in the hull.

@MrOseetah 10 лет назад

Is it bright under the water? Thinking on buying one just like this for our seadoo jet boat! It looks fantastic!

@DanielScheerHowTo 10 лет назад

Not as bright as the ones I put on my previous boat... but given the price and ease of install, I'm happy with them. I spend the night out recently and used it at anchor. I didn't notice any bait fish around though... it was rough conditions. Can't wait to light them up while underway at night... although that rarely happens.

@cbrown4440 8 лет назад

Nice !!

@gueeerrero2525 5 лет назад

to big boat men✅✅✅👍nice much power✅✅✅✅❇️❇️❇️❇️❇️

@DanielScheerHowTo 10 лет назад

Leave your comments or questions here!

@magnifikris 5 лет назад

Do you unplug them to drain the water out ?

@jacobshipman1490 3 года назад

says not to leave on outside water fyi

@GarryThomassaltyreefers 8 лет назад

Wire nuts is a bodge job! You can not beat a soldered connection with shrinkwrap. I do understand, its your boat. BUT if you are doing a job, do it properly first!!!!! No matter how good you think your memory is, you will never remember different coloured wires which you are joining together. Thats poor workmanship!

@TheSpadre 6 лет назад

Garry, while you are correct in no wire nuts on a boat, soldered connections also are not to the ABYC Standards. " A more practical solution is to use a crimp connector described above. Wires should never be joined simply by soldering and taping (or heat shrink)" You must use a crimp connector. You may choose to solder and crimp, but not solder and no crimp.

@MrLucky6man 9 лет назад

I put this one on my boat and it is extremely bright. Just about blinded myself testing it out on my kitchen counter. www.amazon.com/gp/product/B00YHT7PR6

@idropem96 5 лет назад

I purchased a boat that was wired using wire nuts. Needless to say I ended up completely re wiring it. Pitiful that you can find the time to make a video, but not use a soldering iron.