Hoyt Ventum Pro Build

Подписаться 5 тыс.

Просмотров 15 тыс.

50% 1

The new 2022 Hoyt Ventum Pro 30 build at F6 Outdoors in SE Iowa. Loaded up with a HHA Tetra Max (pic) single pin sight.
Discount Codes:
Bedford Camera www.bedfords.com Use Code: JohnnyUtah for 5% off
Full Range System fullrangesyste... Use code: JohnnyUtah for 15% off
Bucked Up Supplements - bckd.co/FQjLsUo
use: JohnnyUtah20 for 20% off
Bourbon Barrel Calls - bourbonbarrelg... (10% off)
Grizzly Coolers - www.grizzlycoo... Use code: JohnnyUtah10_2021 (10% off)
Swisher Products - 1800-222-8183 (mention Johnny Utah and get 25% off)
MusketPowder - Use code Johnnyutah for 10% off
KASTKING - Use code JMATENDISC to save money!
Silencer Central - alnk.to/ehWxKYK
DeerAge- deerage.com/jo...
Clean Eatz- www.cleaneatzk...
Camera Equipment/Gear/Links www.bedfords.com
Sony A7iv & Sony A7iii Camera Bodies, 70-200 Sony G Master, 16-35 Sony G Master
GoPro Hero 8 Black, Rode Video Micro, Sony K2M XLR Mic
DJI Mavic Air 2 Drone, DJI Ronin-s Gimbal, Manfrotto Tripods/Heads
All of these can be purchased from www.bedfords.com
*use code Johnnyutah for 5% at checkout!
Hunting Gear/Food/Links
Diamondback Truck Covers mbsy.co/diamon...

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@eyesintheskies 2 года назад

Always amazed those little nocking loops hold on just a little burnt lip. Not even a full knot! I’m not questioning your skills. Realise this is how it’s done. Just blows me away it doesn’t come undone under all that pressure

@PRIMALDIVIDE Год назад

it is def crazy

@heathkurrle7352 Год назад

I Just bought a new Ventum Pro 33 on close out last week from Jaime at F6 Outdoors. Jaime is absolutely the best to deal with!! The bow is shooting lights out too!! Cool video.

@wcwcgarner2717 Год назад

How does the 33 shoot. My friend is shooting the 30. And he loves it.

@heathkurrle7352 Год назад

@Wc WCGarner coming from a Hoyt Hyperforce, the draw cycle is much smoother and I I went up 10lb in draw weight with no issues. Really liking it! It's fast and dead in the hand as well.

@wcwcgarner2717 Год назад

@@heathkurrle7352 That's awesome you went up 10 pounds. Sounds like a shooter.

@PRIMALDIVIDE Год назад

F6 is a great shop!!!!

@trirobb1 2 года назад

Nice setup John, congrats on an awesome season !

@PRIMALDIVIDE 2 года назад

Thanks 👍

@WildestDreamsTv 2 года назад

Great set up!

@PRIMALDIVIDE 2 года назад

Thanks Billy !

@brandonburker7330 2 года назад

See I wait and do everything AFTER I check the cam timing cause if u put on the d-loop and then your cam timing isn't correct and u correct it then it will move your center shot. Luckily your cam timing was spot on

@PRIMALDIVIDE 2 года назад

I set my d loop to me, then adjust cam timing to me/bow

@GregorsOutdoors Год назад

Like how you're not running a long stabilizer bar forward using only the supplied lower shorty. I'm assuming you shoot with your quiver on to use the back stabilizer.

@PRIMALDIVIDE Год назад

Yessir, I do

@mikemchugh9164 Год назад

This is probably a basic question but I'm struggling to find a video to help me out. I recently purchased a 2022 Hoyt Ventum Pro 30, I want to do the build myself and I am going slow to get it right, Question ??When setting my nock height or position on my string, some say to measure from axle to axle, cut in half and measure off one axle and there is your center on the string, Others talk about a high nocking point? I also purchased the Hoyt QAD rest and some say to put the rest on and zero the rest out on the bow limb marks for the rest and then find your nocking point off the rest with a string T-square. Sorry for the long winded question but any guidance and advice is appreciated.

@jonathan_guerrero Год назад

I will try my best to help you out. I am somewhat new to it so whatever doesn't make sense you can ask me to rephrase. I saw a video that says that nowhere on any bow manual, does it say to measure from axle to axle and cut in half or anything like that. Get a bow square, youtube how to use a bow square and that's your best bet. Watch videos from podium Archer on how to set a nocking point and after MANY hours of tinkering I found him to provide the best explanation and what makes more sense once you put in into practice. As far as your rest, I don't think I understand what you mean can you rephrase? Let me know if you have any questions.

@PRIMALDIVIDE Год назад

set level at raised rest height to start

@jadem4893 2 года назад

Im running a Ventum 33 Pro. Sight picture is still not great. I still see the riser through my sight. Great bow otherwise. Its my only gripe.

@johnnyutahcreative5998 2 года назад

You might looking a shim swap , Hoyt dealers have them, then you can move rest over/sight over. I had this a little bit we needed to shim anyways to tune, corrected everything

@jadem4893 2 года назад

@@johnnyutahcreative5998 Thanks buddy, appreciate your reply will try get in contact with them and source one! Take care.