Тёмный

HP G6-2000 2013 2nd Generation - take apart and reassemble 

regazzz
Подписаться 27 тыс.
Просмотров 51 тыс.
50% 1

Hi!
No music. No talking. Just work.
If you are taking your g6-2000 laptop apart be careful and wear an anti-static wrist band or use other anti-static device. If you need to change a LCD usually you don't have to take screen out of a laptop. You can leave it on a laptop and watch the last part of the video where I am taking LCD apart. If you need to change a keyboard, you don't have to take all bottom screws out. There are usually some marks, like a keyboard picture, on a case bottom. If you need to put a laptop back to work be aware of screws. They are different and you better remember or mark them somehow to insure that you will put them back in to a right place.
Some laptops I take apart first time, so don't be serious on my time and performance.
If something got broken - ooops, it's your fault.
Believe me, some parts in your laptop are already broken, you just don't see that.
Have fun and good luck!!
regazzz #recycling #recycle #upcycling #zerowaste #sustainability #reuse #environment
#handmade #waste #sustainable #diy #vintage #recycled #demolition #upcycle #design #scrap #repair #disassembly #Technology

Наука

Опубликовано:

 

1 май 2014

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 53   
@alexpark472
@alexpark472 2 года назад
That keyboard was so annoying to get out. Thank you for this.
@klwthe3rd
@klwthe3rd 5 лет назад
Excellent video. I just bought a HP G6-2123US and this video walked me through the entire process of disassembly! Thank you.
@farhankader6502
@farhankader6502 7 лет назад
Thanks a lot regazz for the video. I had to open my laptop(HP Pavillion G6 2000) to clean the fan and this is hands ddown the best video to openup the laptop. Thanks again.
@TonySwitzerland
@TonySwitzerland 9 лет назад
Very, very helpful - thank you!
@Vegetacheeks
@Vegetacheeks 9 лет назад
Thank you, two hours later and 15 replays I was able to diagnose my problem. Problem was the inner brackets for the screen were broken. Laptop still works and as a plus, I was able to take apart the fan and clean it, now she purrs quietly. Thanks again !
@regazzz
@regazzz 9 лет назад
Marcos Estrada Yep, fan and heat sink is where all dirt got collected! Great!
@georgeg6506
@georgeg6506 7 лет назад
great video i did my first tear down on my hp so i could replace to bottom tray my tray came in week later and use the video to refresh my memory thanks
@andreabartolini3073
@andreabartolini3073 7 месяцев назад
Se dovete cambiare solo IL CAVO FLAT, iniziate dal minuto 0.00 sec e fermatevi momentaneamente al minuto 6.05 sec. Successivamente, ripartite dal minuto 10.08 sec fino al minuto 14.04 sec, questi ultimi, minuti dedicati allo disassembaggio dello schermo. Per il RIASSEMBLAGGIO, rifate il tutto all'incontrario, ovvero, ripartendo dal minuto 14.04 sec. P.s. Complimenti per l'illustrazione.
@mohitsinha1994
@mohitsinha1994 8 лет назад
sir the main body part(base) where the screen screw fits in(on the upper sides) .. that is broken.. so how to fix that please suggest. thank you
@amzangamsou8635
@amzangamsou8635 5 лет назад
could someone tell me where I can get a whole HP g6 pavilion g6 2228dx shell?
@shelga1
@shelga1 5 лет назад
very helpful! thanks. my bottom case of laptop should have been replaced - it worked! thanks again!
@lakhanthakur3654
@lakhanthakur3654 6 лет назад
Thank you sir
@sdrawkcab190
@sdrawkcab190 9 лет назад
Hey thanks for the video. So I just did this to clean the fan / heatsink, however the charging LCD didn't come on when I plugged it in. What did I forget to plug in?
@stevesran968
@stevesran968 8 лет назад
THIS IS WHY I WILL NOT DO THIS TO MY LAPTOP. ..YOU COULD OF JUST USED A VACUUM CLEANER I USED MY SHOP-VAC WORKED LINE A CHARM. .NO FAN NOISE NO OVER HEATING N9 MORE DUST IT TOOK ONLY 10 SECONDS OF MY TIME
@SoapBoxNematoad
@SoapBoxNematoad 9 лет назад
TY dude, very helpful video, found all the dust finally even if it died long ago...
@regazzz
@regazzz 9 лет назад
SoapBoxNematoad you are very welcome! Thanks!
@Feeeeerg
@Feeeeerg 6 лет назад
This is the same as a G6-2398sa, yes?
@jakehaseman984
@jakehaseman984 5 лет назад
why not apply new thermal paste? you already have the pc apart?
@jubba9263
@jubba9263 3 года назад
You still reading comments? It would be good if you had shown the screw sizes, where to put which size in. Anyways, good video, still helpful after so many years!
@regazzz
@regazzz 3 года назад
Thank you for nice comment!
@mendenza
@mendenza 7 месяцев назад
Muito útil mesmo 👌👌👌
@deejayd351
@deejayd351 6 лет назад
Life saver, thank you Sir
@regazzz
@regazzz 6 лет назад
+Deejay D are you a DJ?
@deejayd351
@deejayd351 6 лет назад
regazzz yes I am a mobile DJ : weddings, functions, private parties, etc
@janno04
@janno04 2 года назад
Thank you 4 the video, after clean the fan and reassemble the screen shows multicolored vertical lines, I did all the work again and still the same :(
@otromikro
@otromikro 8 лет назад
Perfect example of how to break the thread of the screws.
@regazzz
@regazzz 8 лет назад
+Pepe Oliver I would say it is not really true. I use drill a lot and have pretty much same ratio of stripped/non stripped screws as with regular screwdrivers. With a wrong bit thought it can be very bad, but I don't use a wrong bit, do you?
@johnheller2311
@johnheller2311 6 лет назад
I use a decant manual driver and have never stripped a screw. As soon as I saw you using a power driver on a laptop repair I downvoted your video
@uki9846
@uki9846 7 лет назад
can i change graphic card in this laptop?
@uki9846
@uki9846 3 года назад
@FBI Federal Bureau Of Investigation bruh im rocking a 2080 and threadripper rn
@Hugajohan
@Hugajohan 10 лет назад
Ty for this, my screen hinge is weird so i gotta check it out.
@Hugajohan
@Hugajohan 10 лет назад
I did it, it had to get some oil, now it's normal again. Ty for the video.
@regazzz
@regazzz 10 лет назад
Hey, it is just a great news! Thanks!
@IvCastilla
@IvCastilla 5 лет назад
Min 8:20 MoBo reassembly Min 10:15 Screen dissassembly Min 13:45 Screen reassembly
@ironmane
@ironmane 10 лет назад
that 1st screw wont come out for me... it gets bouncy like a spring. wont come out cant force it..
@regazzz
@regazzz 10 лет назад
itburnswheniphee Hi, you may want to check my second channel +LaptopRepairAid and you will be able to find a video about how to remove a different stuck screws.
@DarkLordAli95
@DarkLordAli95 9 лет назад
No it's not stuck, i thought it was too. Just unscrew it then pull the whole piece in the touch pad direction.
@silentf0e
@silentf0e 10 лет назад
Think you could disassemble and reassemble an ASUS u56e? :D
@regazzz
@regazzz 10 лет назад
Need to get one first :) Did you checked a u52f on my channel? Something is telling me it is quit similar to u56...
@SuperCavestory
@SuperCavestory 9 лет назад
Were is the graphic card?
@regazzz
@regazzz 9 лет назад
Retro Bazooka Face It should be somewhere on the motherboard. Integrated.
@jonderwan
@jonderwan 10 лет назад
And that all only for a loose bios battery which makes noisy sounds. Damn
@regazzz
@regazzz 9 лет назад
jonderwan yep, that's too much!
@1Desestreson
@1Desestreson 10 лет назад
Can you open a tablet or smartphones?
@regazzz
@regazzz 10 лет назад
Hello 1Desestreson I can open pretty much everything. The only problem with tablets smartphones ... sometimes digitizer is glued very well to a internal screen and it can be pretty hard to remove a digitizer from screen.
@stevesran968
@stevesran968 8 лет назад
I USED MY SHOP-VAC IT WORKED NO MORE FAN NOISE NO MORE DUST. .YOU DON'T NEED TO TAKE IT ALL APART TO CLEAN THE FAN OUT..A VACUUM WORKS JUST AS GOOD
@regazzz
@regazzz 8 лет назад
+steve sran shop vac is powerful. If everything end up well - great, but I have seen blades of a fan ruined by a regular vacuum cleaner. It was some older fan, but who knows, right?
@stevesran968
@stevesran968 8 лет назад
i never thought of that your rite that could happen
@regazzz
@regazzz 8 лет назад
+steve sran if your laptop works fine, than it didn't happen and it worked well. Great!
@13B-POWAH
@13B-POWAH Месяц назад
bro i just removed like 8 years worth of dust from my cooling system, that shit wasn't venting AT ALL
@regazzz
@regazzz Месяц назад
Not surprised, the amount of lint buildup is unbelievable in some laptops... With cleaning and repasting new cooling compound and can do wonders!
Далее
HP G6 совсем мертвый
10:03
Просмотров 45 тыс.
HP Pavilion G6-2000 - Disassembly and cleaning
9:27
Просмотров 23 тыс.
I Made a CRT Game Boy
20:44
Просмотров 40 тыс.
LFC#81 - HP G6 Hinges
15:28
Просмотров 54 тыс.
How to replace the keyboard on a HP Pavilion G6 laptop
16:35
HP Pavilion g6-1000 - Disassembly and cleaning
9:15
Просмотров 163 тыс.
How do I open my HP Pavilion g6 laptop? - Trusty Vibes
10:05