Тёмный

HP LaserJet Pro P1102w Printer(CE658A), How to configure wireless settings 

JA R
Подписаться 334
Просмотров 441 тыс.
50% 1

HP LaserJet Pro P1102w Printer (CE658A)
How to Enable Ad Hoc, modify settings, reset to factory default or assigning IP Fixe on HP LaserJet Pro P1102w Printer (CE658A) without access to Modem.
(HP1102W CE657A is a little bit different but should work)
1) Check your settings, to do that, press and hold Cancel button for printing one configuration page
2) We can see that there are there are some personal settings
3) We need to restore the printer to factory-set default settings
4) Press the Power button to turn off the product.
5) Press the Power button to turn on the product.
6) The product begins to initialize.
7) During init press and hold the Cancel button and the Wireless button for 10 seconds
.../... until 2 LED lights blink together, and then release both buttons.
LED lights blink alternatively until only green led is on.
The factory default settings are restored.
8) Press and hold cancel button for printing one new configuration page
9) You can see that your printer report shows IP Address to 0.0.0.0, same 0.0.0.0 for subnet, default gateway...
And the Direct Print is off.
10) Now go on one computer of your wireless domain (wired or wireless).
And launch full software from hp support
11) Follow this simple steps! (I cut a little bit the waiting time)
12) Now close all windows and come back to your Printer P1102W.
13) Press and hold cancel button for printing one new configuration page.
14) Note carrefully : IPv4, Subnet and Ip Default Gateway and come back on your computer
15) It should be 169.254.xxx.xxx, modify your network settings as following...
169.254.XXX.XXX+1, subnet and gateway as on your last printed page.
16) Open your browser and go to the http site of the IP printer address.
17) Once you are in the Printer Web-Interface,
Go to “Networking” and configure your wireless network and click
apply.
18) Configure back the TCP/IP Network Properties of your computer as origin.
19) Once it’s configured and working, you should be able to ping the printer with his new IP and configure it on all your posts.
20) That's all folk!!!

Опубликовано:

 

24 ноя 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 123   
@teeruby5236
@teeruby5236 2 года назад
Thank you so much for your video! I had to reinstall my HP 1102w because it stopped working wirelessly. I tried the instructions on the HP website and got nowhere. I followed the instructions in your video and now can print wirelessly from all my devices. Thank you!
@sundskanten
@sundskanten 2 года назад
Thank you! A very useful video. I had connect to a new Wi-Fi network. The old router had crashed. In half an hour I managed to reset my P1102w to factory settings, and after that it was easy to follow your steps and reinstall the printer. I really appreciate your effoprt!
@artrock8175
@artrock8175 Год назад
Quick, simple, and straight forward! Thanks for posting this!
@damjanmarkovski9721
@damjanmarkovski9721 2 года назад
Alright guys, just wanted to add a comment about my experience with this printer. I had a lot of trouble setting up wireless printing option since the cable connection worked just fine. I would always get a blue blinking light on the printer after running the wireless configuration setup. Tried so many different things and this is what worked for me at the end. It was about the wireless router. Most of the new routers work on both 2.4 and 5 GHZ. This particular printer works only with 2.4 GHZ frequency. And that is what I needed to change on my router. In the router settings in my browser there are 2.4 and 5 GHZ edit tabs. In the 2.4 GHZ edit tab there are two modes. The default mode was 802.11 g/n. I changed it to 802.11 b/g/n mode and voila. The problem was fixed. I ran the wireless configuration setup for the last time and the printer was able to connect to my router. The cable was no longer needed. Hope this helps you as well and fixes your issue with this printer. Happy printing ;-)
@HowDidIGet3700Subs
@HowDidIGet3700Subs Год назад
you forgot to state HOW to access your router settings from a browser. Knowledge is useless if you can't communicate effectively.X
@candykaneish1
@candykaneish1 Год назад
Thank You!!!! I was ready to go buy a new printer...you made it so easy!!
@naturallydope247
@naturallydope247 3 года назад
Thanks this helped me. It worked! I now have a working $10 laser printer.
@noshah11
@noshah11 3 года назад
im glad i found the solution here thanks and god bless you
@mariocalado216
@mariocalado216 3 года назад
Tenho uma impressora dessa 1102w....fiz tudo que se pode fazer: limpei a solenóide, inverti a borracha que puxa o papel, estiquei as molas da bandeja e mesmo assim o defeito continuava (puxava o papel um pouco e parava). Daí, observei que existem duas travas embaixo da bandeja e percebi que, justamente a trava do lado que amassava um pouco o papel, estava fora do lugar. Fiz um pouco de força e a coloquei na mesma posição da outra. PRONTO, RESOLVIDO O PROBLEMA !👍👍👍
@ReneSantos-RSSystem
@ReneSantos-RSSystem Год назад
Thanks bro, you saved my work today! Abraço do Brasil!!
@resumebyron6825
@resumebyron6825 6 лет назад
In the Printer Web-interface, under "Networking", under IP Address Configuration -- once you select the "Manual IP" button, where are you getting the manual configuration from for the "manual IP address? I noticed the information didn't come from the configuration print-out generated by the printer.
@chahatveerbrar1917
@chahatveerbrar1917 2 года назад
Thank you this really helped alot!!
@naqashsadique524
@naqashsadique524 4 года назад
After 4hours of trying to get this printer to work I finally did it. First I reset the printer as shown in the video and then paired it with my router. It just connected. I had tried this before but without resetting the printer. No installation needed in Windows 10
@jamjang210
@jamjang210 2 года назад
Thank​ you​ for​ your​ help.​ It​ very​ useful for​ me.
@ChatGPTCentralNM
@ChatGPTCentralNM Год назад
This worked for me! Thank you thank you so so much!
@tigertigerpantherfox3714
@tigertigerpantherfox3714 5 лет назад
I really feel like throwing the printer in the bin now! Why can't HP make it easier to connect like most other appliances!!! Why make it so hard to connect a printer?
@anthonysach
@anthonysach 3 года назад
@PrathipKumar Ramalingam They are consistent in changing the setup in every new generation of printer.
@Alsrhany
@Alsrhany Год назад
😂😂😂😂😂
@owenwalters3967
@owenwalters3967 2 года назад
Love it! Good looking
@KirkandRA
@KirkandRA 6 лет назад
I had issues with this Printer because of the wifi setup. What finally worked for me was press the WPS button on your router to allow the printer to get on your wifi connection. any of your wireless devices (Laptop or tablets or phones) should automatically see the printer. Now if you have a desktop that is hardwired (No wireless, setup the software and select the option wireless network instead of wireless or USB. finally worked for me
@bilalferoz100
@bilalferoz100 4 года назад
This is perfect! Better than any video.. Thanks a lot
@caramontana4948
@caramontana4948 7 месяцев назад
Thanks a lot. You are the best.
@vashcorler
@vashcorler 3 года назад
Thank god u help me alot!
@jacobsevene6653
@jacobsevene6653 Год назад
Nice. Thank you
@niconnah
@niconnah 2 года назад
Up to where your connection failed mines didnt and is now working thank you very much
@ramshouse9963
@ramshouse9963 3 года назад
Works great in Ubuntu found the driver automatically. Its a fast printer.
@agatakopta739
@agatakopta739 2 года назад
Thank you a lot
@asyapehlivan2180
@asyapehlivan2180 3 года назад
thank you;)
@genesisrobinson8058
@genesisrobinson8058 3 года назад
where do you get the software at cuz im looking for it
@eriksonmagnaye7258
@eriksonmagnaye7258 3 года назад
were same model nut keeps printing two pages of configuration cant show the alternating or together light of two leds
@johnsonrajesh3
@johnsonrajesh3 4 года назад
Can i get the software link for this to connect in wifi
@narendrakumarsingh3837
@narendrakumarsingh3837 5 лет назад
1102w hp blue and red light blinking this problem
@denisiliev4504
@denisiliev4504 5 лет назад
Thank you very much. If drivers doesnt open and launching type in C:\LJP1100_P1560_P1600_Full_Solution\HpSetup.exe in the ,, Windows Run'', which opens by pressing Windows button and R. Had that problem, but the video was perfect
@Jegrod
@Jegrod 4 года назад
had the same problem thank you very much
@danielrosa7971
@danielrosa7971 3 года назад
Thank you very much!
@amirzeb2709
@amirzeb2709 4 года назад
how to print word or excel document wirelessly from a mobile.
@amarugarcia5988
@amarugarcia5988 6 лет назад
Muy bien
@whynot27
@whynot27 Год назад
Can we use it to print colour printing
@LenaKring
@LenaKring Год назад
how did u get to the 11 part how did u get that opened?
@thomasshakelton
@thomasshakelton Год назад
Can someone provide a link to the Driver can't seem to find the right one.
@AmirGhzawi
@AmirGhzawi 9 месяцев назад
i print from (direct wi-fi) and its so bad.this solution to print from your wi-fi network ?
@ivanmolina9304
@ivanmolina9304 6 лет назад
The HP Laserjet p1102w have ethernet port? Why do you have change settings in there device communication?
@anthonysach
@anthonysach 3 года назад
There is no cable ethernet port. There is a usb port tho'.
@Moj-Masti_007
@Moj-Masti_007 6 лет назад
at 2:45 how u got the pass-phrase
@alambstale
@alambstale 5 лет назад
How can I find my claim code
@andreamaccaferri169
@andreamaccaferri169 7 лет назад
I have the same printer, unfortunally all ip number was 0.0.0.0, direct print was off, wireless disabled. I have reset to default as explained, tried to install using usb cable and HP install software, printer was detected by usb and installed usb mode, but no way to setup any wifi network in automatic or manual using ssid, after hour of useless try and try again, I have enabled wps on router, pressed wifi button on printer and magically the printer get an ip number and connected to router. Then after printed status page, I can get into configuration page of printer using the printer status ip number.
@OkamiVIEW
@OkamiVIEW 7 лет назад
Would have destroyed my printer out of pure frustration if you wouldn´t gotten me this tipp. Now it works and the printer has an IP. You saved me more than jesus ;D . Thanks man!
@joshuasolaman6689
@joshuasolaman6689 6 лет назад
Andrea Maccaferri, Thank you!! Was getting ready to take rip my hair out!
@at0micBastard
@at0micBastard 6 лет назад
not sure if I do it well, I get more and more frustrated of this kindly please help how to do it step by step. I have WIFI Networking configured but because IP Configured By =Manual, not autoIP (DHCP) the printer is unable do get IP from router. I tried to click on WPS at the router and then to WIFI button at the printer but without success. Kindly please describe it step by step. I wish I have never buy such equipment which isn'f flexible and reliable enough.... With kind regards, Andy
@abdelghanib
@abdelghanib 6 лет назад
try entering the WiFi credentials manually it's works fine for me
@MiguAlvFeria
@MiguAlvFeria 4 года назад
@@at0micBastard Same hapends to me, i have the IP configuration by = Manual on the printer setings and i think thats why the ssid method isnt working for me. I tryed the WPS method but the printer wont change the IP.. I need help.
@AnonymousB0ss
@AnonymousB0ss 5 лет назад
I have a HP laser jet P1109w Will this work on that And where did u download the software u opened up in the vid
@jamesfangie5458
@jamesfangie5458 5 лет назад
Hi, you can find it on the HP website.
@thomasshakelton
@thomasshakelton Год назад
Did you find the drive? Can't seem to find the right one
@essie3827
@essie3827 5 лет назад
Hello it’s me Estelle
@rajeshdas3916
@rajeshdas3916 6 лет назад
this priter 300hundred print....
@alidanialidani8925
@alidanialidani8925 3 года назад
It’s hard to set up Wi-Fi
@adhamdaoud9986
@adhamdaoud9986 5 лет назад
Hi Is this printer in Egypt? Thank you
@mamai-ly5013
@mamai-ly5013 Год назад
If you have a store that sells printer, probably
@ivanmichaelicao6571
@ivanmichaelicao6571 3 года назад
I tried to press and hold the cancel button and the wireless button, it didn’t work
@VuLe-vb3vk
@VuLe-vb3vk 5 лет назад
Hi. Im in the printer web interface step. In networking tab, where can you find the manual ip address?
@KirkandRA
@KirkandRA 4 года назад
I had issues with connected to wifi and nothing worked. Not even this solution. How I fixed was simply press the Wifi button on the printer, when it stated blink I pressed the WPS button on my router and it connected within a minute. Don't need to install software for Windows 10 it simply works
@VuLe-vb3vk
@VuLe-vb3vk 4 года назад
​@@KirkandRA thanks, I did it. But all of my phone can't find the printer (android &ios and laptop is normal). I also installed hp service plugin on android phone. How about you?
@KirkandRA
@KirkandRA 4 года назад
Huy Vũ Lê Trần I have IOS devices iPhones and iPads and they all see the printer. Just make sure the WiFi indicator on the printer is solid blue. If if it is still blinking, repeat the step above with the WPS button on your router. You may have to reboot your router also. Good luck
@joietan7983
@joietan7983 Год назад
is wireless printing possible using mac ?
@Sajid.Ahmad908
@Sajid.Ahmad908 3 года назад
Sir sofware kaha say mily ga kiya name ha sofware ka?
@deathagents3788
@deathagents3788 4 года назад
2:18 nothing appear my wifi connection at this step someone can help me ?
@17trebron
@17trebron 4 года назад
I got this same. Any solutions?
@LixaPixa
@LixaPixa 5 лет назад
I really wish this video would have helped me. It didn't. :(
@jellyandme
@jellyandme 4 года назад
It did help me, and then it didn't. I found that a new version of windows 10 was the problem. Try uninstalling all traces of the printer, then rather than installing the printer stuff, try right clicking and selecting 'troubleshoot compatibility'. I found running it as a windows 7 program got it working. If that doesn't work, try refreshing your pc (but keeping all your files) and then doing the troubleshooting again. Good luck...if you haven't given up after four months.
@yasserpinoalvarez3637
@yasserpinoalvarez3637 5 лет назад
after download the software, I doble click in the file and start extracting but never launch as you shows in the video
@masumrana8226
@masumrana8226 5 лет назад
Extract your file in a new folder first and make sure "WinRAR" has installed. And Then set up from setup.exe file.
@josefonseca656
@josefonseca656 2 месяца назад
Información en español
@Adam90028
@Adam90028 4 года назад
Printer’s website wont load
@kanongdl3766
@kanongdl3766 4 года назад
i could made it work on my network, my printter is a LaserJet p1102w at the first try it don't work, but i did all steps from de installation software and it connct to my network
@genesisrobinson8058
@genesisrobinson8058 3 года назад
how do you get it connected to your wifi
@kanongdl3766
@kanongdl3766 3 года назад
@@genesisrobinson8058 i did the same steps from the video, and then i install the drivers for my printer but i Select wifi configuration, i did it 2 times and the second one it works
@genesisrobinson8058
@genesisrobinson8058 3 года назад
@@kanongdl3766 ok thank you so much
@kanongdl3766
@kanongdl3766 3 года назад
@@genesisrobinson8058 hope you can do it work too
@genesisrobinson8058
@genesisrobinson8058 3 года назад
@@kanongdl3766 what does it look like
@JustBossTalk-JD
@JustBossTalk-JD Год назад
i got a mac how tf do i connect this bih ?
@esronsibuea1229
@esronsibuea1229 6 лет назад
how i got the IP address this print ?
@didi112195
@didi112195 5 лет назад
HELP! I downloaded the full software and HP support program but after it does the whole "extracting" thing nothing happens. How do I get the program to open?
@kristfur
@kristfur 5 лет назад
same for me, did you ever get it to work?
@didi112195
@didi112195 5 лет назад
@@kristfur Nope
@jellyandme
@jellyandme 4 года назад
It extracts all the files to a some other location. Try doing a file search for 'HP' if that doesn't work, rename the exe as a 'zip' and try opening and extracting that to a location you know.
@KirkandRA
@KirkandRA 4 года назад
I had issues with connected to wifi and nothing worked. Not even this solution. How I fixed was simply press the Wifi button on the printer, when it stated blink I pressed the WPS button on my router and it connected within a minute. Don't need to install software for Windows 10 it simply works
@esteban4878
@esteban4878 3 года назад
Is it me or there is no sound on this video?
@SapliA
@SapliA 6 лет назад
where I can find Ip address?
@Sheckerr
@Sheckerr 5 лет назад
check your wifi and there should be Advanced options and your ip should be there
@lassanetapsoba4980
@lassanetapsoba4980 3 года назад
Je n' arrive pas a installe mon imprimante hp laser 1102
@lassanetapsoba4980
@lassanetapsoba4980 3 года назад
Je n'arrive pas a installe mon imprimante hp laser 1102w
@kristenjolly3228
@kristenjolly3228 11 месяцев назад
I can't hear anything at all.
@hstevenadams1202
@hstevenadams1202 Год назад
No sound.
@justintrombley2135
@justintrombley2135 5 лет назад
The software refuses to open. It extracts but then nothing
@ricardomaldonado1448
@ricardomaldonado1448 5 лет назад
I had the same issue, I fix it by removing the printer first (you need to be sure you don't have any pending printings in the spool) then uninstall previous HP installation and then restart computer.. After that, with the printer with the factory settings and without a previous installation, I was able to run the installer and it works. Hope it helps.
@BleedForOdin
@BleedForOdin 5 лет назад
I have the same problem, removed the printer and all pending printings, uninstalled and same. Extracts and nothing happens...
@masumrana8226
@masumrana8226 5 лет назад
@@BleedForOdin Extract your file in a New folder first and make sure "WinRAR" has installed. And Then set up from setup.exe file.
@bentogomes8787
@bentogomes8787 3 года назад
nao emtedi
@fayyazahmad2214
@fayyazahmad2214 3 года назад
I like it wwwwwwwwwooooooooooooooooowwwwwwwwwwwwww
@janeridolfi8848
@janeridolfi8848 4 года назад
there is no sound
@VuLe-vb3vk
@VuLe-vb3vk 4 года назад
it's hard to understand
@Adam90028
@Adam90028 4 года назад
Program wont even run
@mariaolmos6745
@mariaolmos6745 4 года назад
HP sucks, they make complicated machines
@marietoukane1209
@marietoukane1209 Год назад
Prix
@TheKarout12
@TheKarout12 Год назад
where is the drivers link ... too much talk no walk
@filipsacher364
@filipsacher364 6 лет назад
I had to IP adress 0.0.0.0 config manual. I used util NtScrubber (uloz.to/!DyUETLYwkQks/ntscrubber-rar) or you can used new compurer was not connect to printer P1102w. After clear all driver files by NtScrubber i can start install wireleas printer corect. Now i have correct IP. By FiSach
@ivangoldberg9752
@ivangoldberg9752 Год назад
Go laser jet mfp m29w
@cyeleven
@cyeleven 4 года назад
Didn't do this but got mine to work by doing standard installation which ends without the printer connected to network, then upgraded firmware here: support.hp.com/us-en/drivers/selfservice/closure/hp-laserjet-pro-p1102-printer-series/4110394/model/4110306?ssfFlag=true&sku= followed by: When the update completes, click OK. If you connected a USB cable to update your network printer, continue with these steps remove the USB driver that Windows installed during the connection. Search Windows for ‘Devices and Printers’, then click Devices and Printers in the list of results. Right-click the USB printer device that matches your printer model, then select **Remove Device **. Disconnect the USB cable from the printer and the computer, then restart the computer. When I reboot I see a new printer installed under the name NPI****** (Laserjet Professional P 1102w) with ****** being the last 6 of printer's MAC ID. Thanks HP for supporting your products. Peace out.
@HowDidIGet3700Subs
@HowDidIGet3700Subs Год назад
You don’t need software to install the printer this is nonsense. Windows has everything
@lucascaliel
@lucascaliel 3 года назад
just make every thing worse
@HenriettaVarju
@HenriettaVarju 4 года назад
This printer is a POS. HP should be ashamed every putting it on the market.
Далее
How To Install HP LaserJet Pro P1102w Printer Driver
10:10
Занимайся йогой со мной 🫶🏻
00:13
How To Install HP LaserJet Pro P1102 Driver In Windows
7:33
HP LaserJet P1102w Instructional Video
1:49
Просмотров 43 тыс.
Занимайся йогой со мной 🫶🏻
00:13