Hp pagewide 477dw error 15.B1.F0 jam error solve 100% Hp pagewide 5860 error 15.B1.F0 jam error solve 100% Hp pagewide 586 error 15.B1.F0 jam error solve 100%
Hello and thank you for your solution! Do you also know a solution for the HP Pagewide X555 error "15.a0.f1 paper jam tray 1" but there is no paper jam, the real problem is that the paper pickup in tray 1 does not work (but the pickup sound can be heard). Many thanks in advance for any tips!
Hi Thank you for your video. It is very helpful. I have HP pagewide 556 the printer prints nothing/blank and I cleaned the print haed by tissue with print head cleaning solution from backside /removing ICU/ then some part has been printed black and very fem magenta printed. I used print head level one and two cleaning and i got no change. Can you help me please how I can clean print head manually ? Thank you
Hi I am getting a paper jam error on start up as well in a 477 but not an exact error code, I see are pointing at the clear encoder disk, but I dont really understand what you did. Can you elaborate in a comment? I assume that the disk is dirty and needs to clean?
Cleaned with alcohol to remove the ink residue stick in the encoder wheel or encoder sensor. but be careful not to use a strong alcohol agent because it might erase the encoder lines.
Sir tanong ko lang meron kaming printer na hp477 pagwide at hp586 ang problema sir ayaw mag lift up ang papel kahit na nag reset na ako pwede ba makahingi ng kunting advice sa inyo kung dapat gawin salamat and GOD BLESS
hello you should double check on the mechanical side around the paper feeding area, example you need to chek if the pick0up rubber roller, maybe it is already worn-out, or maybe it is misaligned, or maybe you need to check if the pick-roller is not rotating. you need to check also maybe the cassette paper lefter is not working. it really needs to visual inspection and find the faulty in that area first.
The root cost of the issue is the ink mist suck by the exhaust fan scattered inside the machine, and since the ink mist is scattered inside it also affects all the encoder wheel sensors. So to solve the problem we need to cleaned all the sensors and all encoder wheel senssors. much better also to make a hole in the plastic back cover so that the exhaust can exit direct from the inside of the machine. You make the cut directly where the excahuse outlet is located.
