HQProp T3x2x3: The New GO TO for the Quadmula SF3! // 4K FPV Freestyle // MurdersFPV

Подписаться 8 тыс.

Просмотров 8 тыс.

50% 1

I am super grateful for the recommendation from HQProp on these T3x2x3 3" 1.5MM props because they not only rip but they are easily the most durable 3" props I have tried on the Quadmula Siren F3 Split. T mount props are a pain in the butt to have to swap out so I am really glad for this find and I highly recommend you guys give them a try.
Another huge nod for Flywoo for finally making an ND filter that I haven't lost yet!
Affiliate link to the Flywoo O3 ND filter set:
flywoo.net/pro...
HQProp T3x2x3 (My Favorite)
pyrodrone.com/...
HQProp T3x1.8x3
pyrodrone.com/...
HQProp T3x1.5x3
pyrodrone.com/...
Thank you to my sponsors for helping me do what I love!
T-Motor
Quadmula
Pick up your own Siren F3 Split here(affiliate link):
quadmula.com/p...
Link to this quads CLI dump:
drive.google.c...
Betaflight 4.4
Quadmula Siren F3 Split Frame
T-Motor Mini F7 FC
T-Motor Mini F45A 32Bit 4in1 ESC
T-Motor Pacer P1604 2850KV Motors
TBS Tracer Nano RX
Radiomaster TX16S Max AG01 Gimbals
DJI O3 Air Unit
DJI Goggles 2
HQProp T3x2x3 3" 1.5MM Props
GNB HV 380mAh 90c 6s Lipos
DJI O3 DVR
Edited in Adobe Premiere Pro
Follow me on social media!
linktr.ee/murd...
Inquiries for collaboration!
murders2020@gmail.com
#fpv #fpvfreestyle #dji #djifpv #quadmula #sirenf3 #tmotorfpv #hqprop #teamblacksheep #gnblipos #radiomaster #betaflight #dvr #nostab

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@JThemelis Год назад

My F3 arrives today! Youve been on fire lately! I think I’m moving my daily drivers to Quadmula frames based on this content!

@slamcool Год назад

this drone is great, the props are really great thanks!! I have been crashing it a few times; small branches and wires and it survived it with no scratches! But I'm tired of hitting those tiny invisible obstacles, my area is full of them so I'm ditching my analog setup for O3 ... you sold me on that. I'm getting the Quadmula brackets like you did :)

@Atlas_FPV Год назад

I have found the same with 3.5", the HQProp T3.5x2x3 is the best flying 3.5" prop and the most durable, the Gemfan 3520 snaps blades so easily!

@Swanky0rc Год назад

Just placed an order through ur links for the f3 split, and for the Uv filter! Thank your videos! Love them. This will be my second drone after my Whoop! So excited!

@dkerlee Год назад

I have two five inch, and one 1.5, and a new mobula 8. I think a 3in is gonna be my next build! thanks. I'll check out the props too.

@remixatl Год назад

I am notoriously hard to sell things too. Especially the new hotness. I also have been a hardcore analogue pilot for the past 8 years. I only just stumbled onto your channel about a year ago. But this SF3 series you have been doing SOLD me. I got the entire build the same way you did it, CLI dump and all. Cheers brother. Keep ripping. Check back for content with the new rig in a week.

@demind12 Год назад

How much does it weigh? is it sub 250g?

@killarbeefpv2143 Год назад

Can't wait to try these out! I freaking love that quad..one of my favorite builds to date. 🔥🔥🤘🤘

@mntlfpv Год назад

my fave props for 3" are HQ V1S and GF Flash. There's no real high pitch offerings in t-mount outside of multi-blade cinwhoop props.

@josefdahari Год назад

Killing it with the content homie keep up the amazing work!

@MurdersFPV Год назад

Thank you, brother. This was fun.

@n3n3_FPV Год назад

Hey murders. I just bought everything to build the same SF3 as you. I was wondering if you could update de CLI link, because isnt working anymore. Love your style bro, Keep going!

@MurdersFPV Год назад

Updated, bro. That should work and thanks for the heads up.

@hallfatherofthree7022 Год назад

That's an awesome build. Very snappy and well tuned. The fact that your a great pilot makes it look really good too lol. I was wondering if there was a video setting that would show less props in view using the DJI 03 air module and the quadmula frame you are using?

@MurdersFPV Год назад

You could use Wide FOV which is still plenty of field of view instead of the Ultra FOV. Wide is much closer to the FOV of a GoPro Session 5.

@hallfatherofthree7022 Год назад

@@MurdersFPV Sometime if you get a chance could you do a short video with the wide FOV so I can see how much props are showing? I'd like to do that build and be able to get props out of view. Don't mind cropping the video some in post if I need to. Awesome channel and awesome videos btw.

@MurdersFPV Год назад

@@hallfatherofthree7022 sure I'll get some footage with it.

@deathrollfpv Год назад

I love my sf3! But only getting about 2.5 min on the same gnb 380 also identical specs to your build, maybe it's the freezing weather up here in canadia.

@MurdersFPV Год назад

It's definitely the temperature. That was me too. Luckily it's getting warmer.

@miguelvice Год назад

Looking forward to trying them, but I am looking the Dal Cyclone T3028, a bit pitchy but still smooth and very durable.

@MurdersFPV Год назад

I tried those when I first built the SF3. They were okay but I was able to get a better tune out of the Gemfans. The quad is more responsive and has better prop wash handling. At least for the way I've built it.

@miguelvice Год назад

@@MurdersFPV Yea, a lot smoother with the Gemfans but for heavier 3" rigs I like a bit more pitch in the prop, these HQ might be the way to go, I also belive Gemfan has a new prop put with a bit more pitch might need to see if it is durable or not.

@Greg__K 2 месяца назад

Do you have a preference between 3" and 3.5" for a sub 250 build? Any reason to go with a 3" over the slightly bigger 3.5"? Awesome piloting skills!

@slamonfpv Год назад

nice info and rip that lil fella is a beast 😤🤘

@chrisbee5481 Год назад

What about the gemfan 3020. I tested both, and liked the gemfan more. HQ gave me some oszilations, where the gemfan were fine. Any comparion test?

@MurdersFPV Год назад

I haven't tested them yet but the performance is incredible with the HQProps and I'm still going on the same set. No weird oscillations. I'll have to give the 3020s from Gemfan a try.

@realicetea Год назад

Isn’t the trade with more durability with the impact on the actual motor. “Weaker” props act as the crush zone similar to a car but for the motor where the prop takes the impact

@MurdersFPV Год назад

Hmm, I don't think these props are durable enough to instead damage the motor. I think it's more that they can take an impact and maintain their shape better or at least not break or chip.

@realicetea Год назад

@@MurdersFPV cool thanks for the feedback. Will try them out after I get through my horde of 3016 gemfan :)

@LowetheTechGuy Год назад

That is awesome! I am trying to decide on HdZero or Dji. This is the same image you are seeing right? I got to build this.

@MurdersFPV Год назад

That's the 4k footage but it's honestly the same in the goggles. It is 1080p in the goggles.

@vassilis331 11 месяцев назад

@MurdersFPV What about 3x3x3? I’m considering a similar build with 1804 t motors with the 5mm shaft

@jscervideos Год назад

Fire video! Ordered myself 10packs of those props! Could you share your tune please :)

@MurdersFPV Год назад

The link to my CLI dump is in the description.

@Krumboh Год назад

Hi, can I get some recommendations from your? I will choose your Quadmula SF3 build for my fist drone build ever (: So my first question would be when I dont aim for the taget to stay below 250g wich batterys would you recomend beside your choice of the GMB 380? (so i get a little more flight time) Next question would be here in Germany there are only HQProbs in the dimensions of T3x15x3 or T3x2,5x3 in stock so wich one would you choose? Last question what do you think of using walksnail insted of 03? And thanks for the great content i enjoy it alot, happy flying 🤘

@MurdersFPV Год назад

If you want to use Walksnail I'd say definitely go for it. GNB makes a HV light weight 660mah pack that would be great for more flight time. pyrodrone.com/collections/batteries/products/gaoneng-gnb-6s-660mah-90c-hv-li-po-battery-xt30 I would probably recommend the 3x1.5x3 but honestly get a set of both and test which you like better. The 3x2.5x3 will definitely be a lot more aggressive.

@FERNANDOPR_FPV Год назад

The HQProp T3x2x3, will work great with this motors: xing2 1404 4600KV?

@MurdersFPV Год назад

That should work. You may even want to try the T3x2.5x3 as well.

@FERNANDOPR_FPV Год назад

@@MurdersFPV mmm okey, interesting. I think I would try first the T3x2x3 and then T3x2.5x3 to see what's the best for me. Thank you!

@ExKn Год назад

si there a way to hide the props from the screen? and maybe the carbon on top too?

@MurdersFPV Год назад

You could crop in the frame a bit if you want to remove the top plate. This is unstabilized footage on the highest FOV the DJI O3 system can do.

@herokme0 11 месяцев назад

Any chance you're able to check if a skystar km55 55a esc would fit into the f3 split? dimensions are 35*47*6.5mm

@tooksfpv Год назад

Hi, can i use this quads CLI dump on a quadmula 4s (my first build 🙂)? I have the same fc. 👊

@MurdersFPV Год назад

You should be fine. I always recommend you do your first arm in a safe location and be ready to disarm if something isn't right. If you're hearing strange motor noises or your motors are hot when you land then try lowering the Master Multiplier slider a bit.

@tooksfpv Год назад

@@MurdersFPV Thanks a lot ! 👊

@Maxim_Nub Год назад

i still dont know what should i take for my 3inch build, xing2 1404 4600kv or tmotor as yours but for 4s on 3850kv. drives me crazy haha. but thanks for the props test!! as i thought 1404 but with high kv will be better for that kind of sbang style that you have, but you manage to do it on lower torque motors and make it look so good lol, i love your style, so thinking to go with your suggested motors :D

@JThemelis Год назад

Im transferring my Apex 3” parts to a Siren F3 this week… 1404 4s always worked perfectly fine on the build, but i recently swapped those motors for 1506 and ooomg what a difference. Still running high kv on 4s and perfectly happy w my setup. Good luck!

@Maxim_Nub Год назад

@@JThemelis yeah if you switch from 1404 to 1504 with more or less same kv i can kind of estimate but here is a choice for me becuase these 1604 are kind of much less of kv than those 1404 :D

@dennnuz Год назад

Depends on the props. For me the f1404 4600kv work better with lower pitch props. For the p1604 3800kv on 4s i use the hq t3x2.5x3 or t3x3x3 otherwise it feels underpowered compared to the 1404

@Maxim_Nub Год назад

@@dennnuz so would oyu say 1404 4600kv are less dependent on props and in general give more power? i still dont know what to choose haha

@dennnuz Год назад

@@Maxim_Nub Because of the higher kv they have more power, but the bigger ones have more torque and can drive bigger or higher pitch props. I would say the 1404 is better overall: more efficient and lighter. But the 1604 might be more durable in crashes.

@_.kvng.ky_1081 7 месяцев назад

What stick ends are you using?

@MurdersFPV 7 месяцев назад

flyhighfpv.com/products/thumbgrippies-grandmaster-pinch-sticks-black-m4

@brianfreland9065 Год назад

Do you think 1404 4500kv motors would work on this build? I have a cinelog25 and the frame is busted so i wanted to convert it to a 3inch freestyle quad i just wasnt sure if it would be enough motor.

@MurdersFPV Год назад

I'm a pretty firm believer in the 1604+ size for 3". I would run 1404 motors on a 2.5". If you can hold off for a little later this month then I think you'll have a great option for your 1404 motors.

@herokme0 11 месяцев назад

what’s your thoughts on this quad running the 6s 380mah vs a “traditional” 4s setup? and have you tried 2004 3000kv for 6s, or do you like your pacer 1604 setup?

@MurdersFPV 11 месяцев назад

I'm not a fan of 4s setups even on my 2.5". I only fly the 380mah packs on this build and I think it's great. I prefer the light weight and flight performance over the longer flight times. I think 1604 is as low as I would go for 3". I would go bigger on motors before going smaller.

@herokme0 11 месяцев назад

@@MurdersFPV makes sense, i’ve only ever flown 6s (besides 1s whoops) so i feel like i’d like 6s on a 3”. do you feel a 35a esc would work on your motor + 6s setup? or would i need a 45a esc?

@Ingravidux Год назад

💪🏻💯

@chesterlim15 Год назад

Looking to build one! Do you think a 35a ESC on a similar 6s build is enough?

@MurdersFPV Год назад

Nope. I struggle to keep 45A ESCs going on 6s at 2000+ KV.

@jefffpv2759 Год назад

i like the 3x3x3

@MurdersFPV Год назад

I need to try those, I'm just worried a little about the efficiency. The packs I use for this build to keep it under 250g aren't the best on capacity. It's like searching for that perfect balance of performance + efficiency but keeping its sub two fiddy.

@jefffpv2759 Год назад

@@MurdersFPV theyre not bad. my 3 inch weighs 341g with an 850 mah 4s. 4-5min of pushing it and 6- 6.5 min of cruising. i have gemfan hurricane 3016 and the hurricanes are about a minute less of flight time. they feel nice though.

@SkeezyFPV Год назад

I’ve got a spare aio 45amp aio, xing2 1404 4600kv motors, and an 03 air unit from a pos frame I bought. Any way I could just put the octopus on the Quadmula F3 and just send it, bro? I hate to waste those motors :(

@MurdersFPV Год назад

It's worth a shot. You can get a BEC to power the O3.

@SkeezyFPV Год назад

@@MurdersFPV thanks for the response. I just watched a vid of a guy running them on an Apex 3”. I see no reason why it’s not worth a shot. I ended up cutting the cf prop guards off my Cine25 frame after they shattered on the first pack, flipped the motors right side up, and bottom mounted the lipo and it’s hella fun to fly. I’m starting to see cracks in the top plate (1.5mm cf 😡) where the rear arms go in and it’s not long for this world. Fortunately I didn’t trim the motor wires lol.

@MurdersFPV Год назад

@@SkeezyFPV actually wait if you're planning on running it on 3-4s then you can just power the O3 off VBATT. That's an option too.

@SkeezyFPV Год назад

@@MurdersFPV yeah I’m running 4s 850mAh and staying below 250g(ish). It’s now called the WarriorLife25 😂

@SkeezyFPV Год назад

@@MurdersFPV will it fit a 25x25 aio?

@12pewsback Год назад

Bruh, what was that Drone-Jitsu cry you made at 7:57?! 😂… still wasn’t all that impressive 🤭. Btw, lemme get one of those UwU filters you were talkin’ bout

@MurdersFPV Год назад

Haha! I make so many weird noises while flying around. I'm sure anyone observing me who just happens to walk by probably thinks I'm a huge nerd. It's even more funny when I start to get into it I move my body with the drone movements looking like Ray Charles. 🤣😂😅

@12pewsback Год назад

@@MurdersFPV lord, not Ray Charles 🤣

@pxsaber2177 Год назад

For 3.5“ props Recursion Labs did a test with the 3.5x2.5x3 props. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gUMyORUuEhc.html They are more efficient, have higher thrust and are quieter than the lower pitch props. Maybe that applies for the 3“ props too! Might be worth a try!

@MurdersFPV Год назад

Thanks for the input. I'll definitely check it out.

@fpvillain Год назад

I’ll have to give them a try on mine! Those gaps! 🫣😅

@Ugly_Baby_Gaming Год назад

dude you could get grandma to chew on hq props and still rip with her false teeth attached there like chain saws my quad looks like the inside of a lawn mower from hacking though everything lol ..... I got 3x3x3 hq on my little 3"