Huge Solar Panel Improvement Program has Started! Part 1

Подписаться 59 тыс.

Просмотров 6 тыс.

50% 1

Today we have the HUGE Solar Panel Improvement Program starting at the Average Joe House!! The Goal is to FILL the ROOF with Solar Panels!!
These are Affiliate Links to the Solar Panels, Racks and Parts⤵
🔗370w SunGoldPower Panels - shrsl.com/4gyi8
🔗Santan Solar Panels - www.santansolar.com/product-c...
🔗SnapNrack TopSpeed Solar Panel Roof Mount - signaturesolar.com/snapnrack-...
🔗EG4 Ground Mount - signaturesolar.com/eg4-bright...
🔗Tigo TS4-A-2F RSD - signaturesolar.com/tigo-15a-1...
🔗Solar Panel Wire Clips - signaturesolar.com/snapnrack-...
🔗Amazon Wire Clips - amzn.to/3KU3T6t
🔗10AWG PV Wire - amzn.to/4cbzi0k
🔗EZ Solar Rooftop Junction Box - amzn.to/3xjeAMV
🔗Bouge MC4 Connectors - amzn.to/4bdFqDZ
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Support Section⤵
Become part of the BOOOOOM Team for as little as $1! It Doesn't get you much!!! Check me out at 🔗patreon.com/user?u=3675924
Top Supporting BOOOOOM Team Members:
💥Leslie R. Isgrigg-Diy Solar & Powerwaller
💥Shawn Maker-Diy Solar & Powerwaller
/ @shawnmaker6974
💥James Atkinson - Diy Solar, Powerwalls and Tech Reviews / masteryodajames
Exclusive BOOOM Team Supporters:
David Wilker, Michael Dudley, Sebastian Kjær Jensen, Joe Gladle, Keith Brown
Newest BOOM Team Members:
Michael Dudley, Paul Curtis and Carlos Campbell
If you like the channel and videos and want to donate, support me on Patreon, feature a product or help out with a project, you can. Send me message to averagejoestuff@gmail.com, or donate with the Links below 🤘 Thanks to all Awesome people who have donated and Support My RU-vid Ch!!!
Paypal 🔗paypal.me/YourAveRageJoe
ETH 🔗0x10E0AC75f9F053f146D6d003678F1c9BA1893dCb
Follow me on⤵
InstaGram 🔗 / average.joe00
Want to send something Small?
Send to:⤵
AveRage Joe
PO Box 31562
Omaha, NE 68131
Something Big like a Battery thru UPS, FedEx or DHL?
Send to:⤵
AveRage Joe
608 N Saddle Creek Rd # 31562
Omaha, NE 68132
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Music Provided by⤵
🔗Epidemicsound.com

Хобби

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 112

@slidewaze 14 дней назад

Of course it took a lot longer than you thought. You were filming. And for that we thank you!!

@AveRage_Joe 14 дней назад

TROOF! And thank you!💥🤘

@AdamDeLay07 10 дней назад

I had the same problems you did when I put my first array on the barn roof. Also had a big buildup of leaves and pine needles under the panels. While I thought it was "easier" it just cost me more time because I had to pull it all down and add a proper rail system. Thanks for taking us along! Looking forward to part 2!

@offgriddreaming5403 14 дней назад

Squirrel photo bomb 0.25 🤜🏼🔥🤛🏼

@AveRage_Joe 14 дней назад

100% photo bomb lol. I almost did a zoom in on that part😆😆😆

@Jimmeh_B 14 дней назад

Ay Joe! Personally, I wouldn't be worried about the fire risk from cracked vinyl, that's not gonna happen. I would however be worried about a fire from a fault condition at voltages approaching 500 DC.

@AveRage_Joe 14 дней назад

TROOF!😬⚡️⚡️⚡️💥

@Songomx 14 дней назад

Awesome, Joe!!! Loved this video and will probably love the other parts...!!! Very educational and shows everyone what NOT to do on a DIY install (the first one you did, I mean 😊). But now you have a lot of accumulated knowledge on solar photovoltaics... now you can show off all that...!!! Wish I could be there to give you a hand, Buddy!!!! Anyway, nice job and will be looking forward for parts 2 and 3...!!! Good Luck, man!!! 👌🏻👍🏻👋🏻👋🏻

@AveRage_Joe 14 дней назад

Thanks Man! Yeah I did and made a few errors lol but thats how we learn. I have for sure learned a ton since I "installed" this. Some of the new knowledge will be used and some wont lol😁😆

@soggyb4082 14 дней назад

I wonder if Rhino Liner would heal those vinyl cracked panel to ok status? I think it comes in a can now. Never used it myself. Cheap is good.

@AveRage_Joe 14 дней назад

Its possible. I was gonna spray with flexseal🤷‍♂️

@emcsquare62 13 дней назад

Great job, Joe. I always enjoy following along. I'm almost convenienced to try solar myself.

@AveRage_Joe 13 дней назад

Thanks I appreciate that! You should do solar and do it yourself!

@SyberPrepper 14 дней назад

Thanks for the video! I learned lots of great tips.

@AveRage_Joe 14 дней назад

Awesome! Thanks for watching!

@cgutowski471 14 дней назад

Your content rocks. Keep it coming. I’ve given up on DIY roof mount. Too much crap to deal with. Ground mount is much easier

@AveRage_Joe 13 дней назад

Thank You! I would prefer ground mount!

@homdiddlyoh 14 дней назад

a quickie fix could be to add more wood blocks on top of what you got, just to raise it up a bit till you get the other equipment.

@AveRage_Joe 14 дней назад

That is a good idea actually!

@whattheschmidt 14 дней назад

Nice to show the things not to do and learn from them. I read all the directions and it was crazy to me that my panels said to install 5" off the roof. I did just about that, probably 4.5" but it seems so high compared to my garage array. I have 2 arrays - 14 large panels covering south garage face, 8 smaller panels on my house roof near the peak of the back of my house. 5.4kw and 2.5kw, max I was allowed :). It's worth it to buy good racking and follow those systems, both of mine are Iron Ridge. Garage uses the small XR10 racking, my house uses the thicker XR100. I used 16x QuickBolt 2s with 3" microflashing for that 8 panel array - worked perfectly and I only missed 1 rafter and drilled right next to it and the microflashing covered that one error. No leaks. Good stuff!

@AveRage_Joe 13 дней назад

Yeah we live and learn🤭 Iron ridge stuff looks SOLID. I would use them for sure!

@danielglang6312 14 дней назад

I would think that a solution to all the leaves and other junk collecting under the panels would be to place the struts vertically instead of horizontally. It would require a little more planning ti ensure that the edges of the panels line up with the struts.

@AveRage_Joe 13 дней назад

Yeah that is an option. Possible put them in the landscape orientation.

@davidanstice 14 дней назад

Nice systems used. Thanks.

@AveRage_Joe 14 дней назад

Thanks Mate!

@Lauren-ci6uv 14 дней назад

Make the Bond!

@AveRage_Joe 14 дней назад

😲😲😲😲 GOOD ONE!!!!😆 I like it! Ill have to use that!😆

@Hansen710 8 дней назад

a surge protector protects your items in the house from lightening.. they are in the building codes for new houses where i live.. a doctor just lost a x ray machine not far from me from lightening 150.000 € those money could have been saved for a few hundred euro for a surge protector

@0xdeadc0de 14 дней назад

I hope the next parts of this project comes instantly so we can follow your work from the couch 🛋️ 😂 Thanks for your very good Videos & Description. Best regards from Germany

@AveRage_Joe 14 дней назад

I hope the next part comes instantly too!😆 HAA just kiddn. Its all about the journey.....RIGHT🤔🤷‍♂️😆

@wayne8113 14 дней назад

Thanks Joe

@AveRage_Joe 14 дней назад

Thanks Wayne!

@panospapadimitriou3498 14 дней назад

today i watched your video first i hope Andy's feelings won't get hurt!!!! nice stainless racks./// next week i make my arrays and it was extra motivating to push me do some progress

@AveRage_Joe 14 дней назад

HAAA Im sure Andy would Approve. I need to stop over and watch as well! Are you doing roof or ground?

@clarencewiles963 14 дней назад

Experience, knowledge, and understanding! 😊

@AveRage_Joe 14 дней назад

1 Hundred!😆

@wallacegarciagarcia5557 14 дней назад

Beautiful ❤

@AveRage_Joe 14 дней назад

Thank You!

@thedabbler2753 14 дней назад

If you want to feel better about your panel installation I can send you photos of mine! Thanks for the video. Looking forward to part two.

@AveRage_Joe 13 дней назад

Lol you are just trying to make mine look good right😆

@terrytexas8257 13 дней назад

I remember when we all first started down this journey. Cheap DIY was the way to go, not really thinking about what the future might hold for us. Now that we are all more seasoned with tons of experience under our belts....we do get embarrassed at our once "proud of work". ;)

@AveRage_Joe 12 дней назад

The good ole dayz😆

@AveRage_Joe 12 дней назад

Im still a cheap ass tho HAA

@junkerzn7312 13 дней назад

For flat roofs you definitely want to angle the solar panels (raise one side), at least a bit. That will vastly improve air-flow, reduce the leaf accumulation issue from the wind tunneling effect, as well as improve energy production. Clips or zip-ties can be used on the undersides of the panels to raise the cabling up off the roof. If using zip-ties, you want fairly wide/thick zip-ties to avoid chafing from cutting into the cabling over time. If greater protection of cabling is desired, another option instead of sealed conduit is is to use braided sleeving. As long as it is out of the sun. i.e. its ok if it gets wet, any water that gets in will just evaporate away after the rain stops. And it is easier to clip or zip to the undersides of the panels. You already figured out that THHN is unsuitable for the roof. But those dinkle connectors don't look like they are environmentally sealed either... if not, they are a fire hazard and aren't suitable for the roof. Only environmentally sealed connectors, such as MC4s, are suitable up on the roof. I didn't see what you were doing inside but if you are paralleling strings be sure to use a solar combiner box with proper fusing. I've never seen cracked back-sides of panels before, ever. I don't know how that could have happened short of perhaps the panels over-heating... but even laid down flat there should have been sufficient airflow through those narrow gaps to avoid panel over-heating. I'm kinda scratching my head on that one. -Matt

@lloydprunier4415 13 дней назад

Sorry the roof started leaking, but thanks for showing this. I always wondered about how the roof would do under them. If I ever get panels I will put them on racks in my back yard. One of my neighbors has panels on their roof and I bet they have the same situation. Some company installed them several years ago and the husband passed away so I doubt if the widow will ever check them. I do know when driving by that the panels are covered with mold and who knows what.

@AveRage_Joe 13 дней назад

I think if the roof is a "normal" pitch, it wouldnt be much of a problem. I would also think if a company did it, it would be off the roof a little moar but who knows right🤔

@rodneyhunt 14 дней назад

Good job! My job time estimates are usually days off lol.

@AveRage_Joe 13 дней назад

TROOF😆😆😆😆😆 Im like yeah this should take a few hours....4 days later HAAA

@WiSeNhEiMeR-1369 14 дней назад

I love Love LOVE 60-Cell panels ... COOP ...

@AveRage_Joe 13 дней назад

Is that what you are using?

@offgriddreaming5403 14 дней назад

Black frame panels look so much better hey

@AveRage_Joe 14 дней назад

Who knew lol🤷‍♂️

@Shmade0304 13 дней назад

Joe if I lived near you I’d be helping you bang out projects like this in one day but you live far af bro 😂

@AveRage_Joe 13 дней назад

I need the help on projects like this FO SHO lol. Seems everyone lives so far away🙄😀 Jimmy would help but he is at work during rhe day.

@offgridwanabe 14 дней назад

3.57 volts haha grab on to that (NOT) 357 volts be careful my buddy. Another great video. Ok I understand it now using the rapid shutdown works Thanks

@LarryRichelli 14 дней назад

Why not put a racking system on the semi flat roof. That would not only give you a better angle to the sun and would be much more easy to maintain.

@AveRage_Joe 13 дней назад

Will try to put them on all the roof😀

@stans5270 14 дней назад

FYI - The pressure treated lumber will degrade when water gets into the grain. When installing it, have the grain run parallel to the ground, so the wood's grain doesn't soak in water. Trex would last much longer and is impervious to water damage. Better yet, use the "C" channel placed as a lift ("U" [_] ) so that longer lasting metal is in contact with the roof shingles, which will keep moisture from seeping into the wood. Rotten wood will damage your efforts. An upside of getting the panels higher would be more air flow underneath, which would keep them at a cooler temperature and a higher efficiency.

@AveRage_Joe 13 дней назад

Yeah true that wood will degrade. Some of them are allready. Honestly Im just gonna remove that and install the snapnrack mounts.

@amio_roseto1 13 дней назад

Great video, do u have a video about the Tigo rapid shutdown? Are those been installed because of the shade ?

@AveRage_Joe 13 дней назад

Thanks! No not a seperate video. These are the rapid shut down modules and are "required" by code when installing panels on a roof. The "shade" modules are optimizers. Those you can also get with the RSD function as well.

@kennethalmond8922 14 дней назад

Near 23:30 you talk a bit about ground wire and lightning going inside one way or the other. I use these Midnite Lightning arrestors (MidNite Solar MNSPD-300-DC Surge Protection Device 300VDC) outside at the combiner boxes. There's one for each pair of wires leaving the combiner box -> charge controller, so in theory it will help slow things down before going into the house / charge controller inputs. What do you think about lightning arrestors?

@AveRage_Joe 13 дней назад

Yeah lightning/surge arrestors are a must! I dont have any connected at the moment other then the one in my main panel. Good to hear you have some installed. I will install some when I can as wel get LOTS of lightning around here.

@timcat1004 13 дней назад

I installed 28 panels on my garage in April 2015. No leaks no debris yet. I used Schletter racking with shingle flashing kits and rails. So far the only problem I've had is two MC4 connecters went bad. All Enphase inverters. The micro inverters make it simple for detecting a problem using the Envoy. In your string system it could take you all day to find one bad connector.

@AveRage_Joe 12 дней назад

Awesome! Ill have to look that racking up. I bet its nice keeping an eye on each panel!

@highflowhighflow9896 14 дней назад

In Germany its a rule to grounding the rails with 16mm2 wire to the mains groundbar, not for lightning but just to avoid other problems

@AveRage_Joe 14 дней назад

Its the same here but for some reason most people here think its for lightning🤷‍♂️ I keep telling people to think of it as the air conditioning or some other appliance outside. All that metal needs to be grounded/bonded or in general ALL metal boxes cases ect need to be attached together indoors, so do all the items outside.

@vevenaneathna 14 дней назад

damn, nice job. maybe 2 pieces of pressure lumber or 4x4 lol

@AveRage_Joe 14 дней назад

Yeah for sure lol. Dont do single layer😆😆

@Bowhunters6go8xz6x 14 дней назад

On the leaf problem where wind blows leaves under the solar panels all you need to do is install an (aluminum or plastic trim strip all along the top) where the leaves are entering, also leaves may not be as big an issue up on the peak of the roof away from the trees. If you chose to do it some cheap aluminum door trim material attached to the top panel edge and held on by short self tapping screws or pop rivets can fix that issue! Need the bottom edge open to let out water. ---- Excellent call getting new hardware parts including larger gauge wiring as your system will lose less electricity with heavier gauge wiring. Should use at least PVC pipe or plastic conduit for your wire run (pipe chase) for each string of panels to keep the wires from chaffing on the roof shingles which could start a roof fire over years of chaffing. Sorry if i'm a nag ! LOL

@AveRage_Joe 14 дней назад

I think I would add a "net" of some kind over a solid sheet unless I am misunderstanding. Only for cooling tho on my crappy angled roof. Yeah we might as well get all new wire, parts ect since we ripping it all up lol. Yes, for the wire runs from one string to another or to the roof box will be conduit. I guess I didnt say the words but thought I implied it. Maybe I didnt. 💥🤘

@Bowhunters6go8xz6x 14 дней назад

@@AveRage_Joe - Oh Yeah - some window screen or netting would work and allow for better air flow while keeping out leaves.

@korishan 13 дней назад

Rustoleum will stick to pretty much anything!!! 😂

@AveRage_Joe 13 дней назад

Good!😆

@ursodermatt8809 14 дней назад

mate, if i remember correctly i asked you about leaves collecting under this array, which you denied. that was the reason i asked.

@AveRage_Joe 14 дней назад

Oh....I dont remember🤔😀. It is 100% confirmed lol. If I said no leaves before, it might have been to early or I didnt have them at that time. I did lift the panels a while ago and didnt have any so not sure. The upper set doesnt get that much.

@ursodermatt8809 14 дней назад

@@AveRage_Joe would the blower help when regularly done?

@AveRage_Joe 14 дней назад

It might. I will for sure be keeping an eye on it now.

@RJ-cc1fz 14 дней назад

Bro, I build homes for a living.. that roof doesn't have enough pitch for shingles.. use metal, preferably standing seam if it's in the budget.. that roof will leak a lot sooner than u want it to with that little of a pitch with shingles..

@AveRage_Joe 13 дней назад

Yeah I allways wondered. It use to be a tar and gravel roof. Anything should be better the that right? A metal roof would be sweet!

@RUDY3098 5 дней назад

Good day sir, question I was looking at the Tigo TS4-A-2F RSD and it requires you to have a transmitter to sense when there is no grid power. You never mentioned anything about yours do you have one and if so where did you mount it. Thank you Rudy

@AveRage_Joe 5 дней назад

Ahhh yes great point. I didnt mention it in this video. I mentioned the RSD in the LuxPower inverter and Ethos battery videos. The inverter has the transmitter built right in. If one does not have a transmitter on the inverter then you need to add one seperately. What inverter do you have?

@RUDY3098 5 дней назад

My first array has enphase iq-7 for a grid tie. I wanted to try the ts4 for a ground mount and was reading that I needed a transmitter. I did not know that your inverter had a transmitter. Thanks for the quick reply. Keep up the great content. Rudy

@ricoma6037 14 дней назад

Is there a fireproof vinyl paint that can be used to reseal the back?

@AveRage_Joe 14 дней назад

Could be🤷‍♂️ I was gonna use flexseal😁

@toddwhite8149 14 дней назад

Mr Joe, I'm not sure if it is possible but can that old panel that's peeling be peeled completely off? Or is that there for safety reasons. What does it look like for a experiment let us know?

@AveRage_Joe 13 дней назад

That vinyle is there to help seal the cells. Im gonna spray flex seal on them😁

@electro2606 14 дней назад

And if you don’t ground the metal parts you can get a shock i had this at work not fun when 500 panels give you static shocks

@AveRage_Joe 13 дней назад

Yep, seems many dont understand this and think its for lightning. Im not gonna lie tho, I thought this way back as well😁

@vmoutsop 14 дней назад

Spray some flex seal on the back of those panels

@AveRage_Joe 14 дней назад

I will do that! Then put them on a ground mount sometime.

@todamnbad 13 дней назад

I really enjoy watching all of your videos but would you pass inspection on your installation? Not questioning your work but just curious

@AveRage_Joe 13 дней назад

Thank You! I would say probly not with the diy rack....or with the santan panels. Dont think the santan panels are in the UL range🤭

@todamnbad 13 дней назад

@AveRage_Joe oh okay, I have a diy array but not on my roof, to many codes to follow, mine is safe but roof mounts are way more regulated in my area, I use Santan panels but I opted for the ones with the original stickers which has the UL info on them

@loucinci3922 12 дней назад

How old is your roof? Down here in south Florida, shingle roofs last about 10 yrs. Hmmm...

@AveRage_Joe 12 дней назад

Its at least 10yrs old maybe a few older.

@paulcurtis5496 14 дней назад

Like# 1 - Woohoooooooooooo

@AveRage_Joe 14 дней назад

BOOOOOOOM💥💥💥💥💥💥😆🤘

@mdunbar04 13 дней назад

👍👍👍

@AveRage_Joe 12 дней назад

😆💥🤘

@awbean5254 14 дней назад

AVERAGE JOE, 1. IS METAL EMT CONDUIT REQUIRED CODE FOR ROOF & GOING INTO YOUR HOME FOR HIGH VOLTAGE D.C. IN YOUR AREA? 2. WHEN READING TIGO DOCUMENTS THEY RECOMMEND INSTALLING IT AT THE TOP OR HIGHEST POINT OF THE PANELS, SO WATER 💦 DOES NOT FLOW INTO IT VOIDING THE WARRANTY. 3. YOUR OPTIMIZERS WILL BE NESTING 🪹 IN THE WET & DRY LEAVES 🍁, SO I HOPE YOU WILL BE INSTALLING THE SNAP & RACK TO RAISE YOUR PANELS OFF THE ROOF & ELIMINATE YOUR CURRENT DRY LEAVES 🍂 🍁& MOISTER SOLAR RAILS TRAP 🪤 THAT CAN CAUSE AN ARC FAULT FIRE 🔥!

@AveRage_Joe 14 дней назад

Metal conduit is required when entering a building or structure. So once you go inside yes. On the roof, I think it can be either.

@AlarmProGuy 13 дней назад

It can be exposed around the racking using PV wire but if it’s running on or across the roof metallic raceway is required.

@AveRage_Joe 13 дней назад

I thought you could use pvc outside. Like the grey uv outdoor stuff. Thats what I was planning anyway🤐

@AveRage_Joe 13 дней назад

Yeah the PV wire can be exposed around the racking but the runs no.

@AlarmProGuy 12 дней назад

@@AveRage_Joe, not saying it wouldn't work but does not mean it's code compliant, some schedule 80 is rated for outside use at 600 volts but most schedule 40 is not rated for use in sunlight, just check the ratings. For me the cost is negligible compared to EMT and honestly I can bend EMT a lot faster then cutting and gluing and I get the added benefit of having a grounded metal raceway. Also the snap n rack that you have are pretty cool, I used them on my barn and no issues at all, went very fast .