HUGE Ultrasonic Cleaner for my Large Resin 3D Printers!

Подписаться 497 тыс.

Просмотров 47 тыс.

50% 1

I bought a really large UltraSonic Cleaner for my big resin 3D Printers!
22L Large UltraSonic Cleaner ➜
amzn.to/3aLqaQG
Similar unit to mine if the above is soldout ➜
amzn.to/2RzL51o
10L Ultra SonicCleaner ➜
amzn.to/2U6MWMX
Magneto Bust by Francisquez ➜
www.cgtrader.c...
Mandalorian Helmet by Rob Pauza ➜
www.myminifact...
Mandalorian Pauldron by Nikko Industries ➜
www.nikkoindus...
________________________________________________
Interested in resin 3D Printers?
Peopoly Phenom ➜
www.matterhack...
Epax X10 ➜
epax3d.com/pro...
Elegoo Mars ➜ amzn.to/2xvAJVr
Anycubic Photon ➜ amzn.to/2Ks0FbU
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Full List - www.amazon.com...
Disposable Gloves - amzn.to/2Xjaxfo
Plastic Spatula - amzn.to/2Ijrhuy
Metal Spatula - amzn.to/2XgiHoS
Isopropyl (IPA) - amzn.to/2KoTsdY
Pickle Container - amzn.to/2KkWsrH
Funnel - amzn.to/2IjrrCa
Paint Filters - amzn.to/2XcpK1V
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoff...
_______________________________________________
Gear I'm Using ➜ www.amazon.com...
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
RU-vid ➜ / unclejessy
________________________________________________
Music provided by Argofox:
SANDR - Coming Home
• SANDR - Coming Home [A...
SEND STUFF TO ➜
Uncle Jessy
PO BOX 629
25 Goodburlet RD
Henrietta, NY 14467
#3DPrinting #UncleJessy #Mandalorian

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 153

@gilbertpatrucco5196 4 года назад

Great video!! You are correct in your assumption the heating does not make the cleaning better. I always use my ultrasonic cleaner without the heating and it cleans perfectly. Keep up the awesome work!!!

@3DPrintingNerd 4 года назад

OH MAN OH MAN OH MAN. That ultrasonic cleaner is HUGE and I'm going to need that in my life.

@UncleJessy 4 года назад

Haha DO IT!!!

4 года назад

Regarding those warped areas on the helmet, you mentioned that they got warped due to the temperature, but while you were showing the first piece pre-wash (around 2:00) I had already noticed some warping, so while the warm clean might have exacerbated the issue, it seems that it was already a problem after printing. Good overview though, thanks for sharing!

@UncleJessy 4 года назад

Thanks! yeah i think you're correct

@lateknightbuilder100 2 года назад

I think the warped rubbery resin was from the mean green. If you leave a print in mean green for too long (no matter what the print is) it will leave the print very rubbery and it will easily break.

@chrislannon 4 года назад

I use Mean Green contained in the ziplock bag, suspended in water in the sonic cleaner (so I don't have to wash out the sonic cleaner). Then I rinse off the mean green with IPA in a pickle container, followed by water, then let dry. Works great!

@lanceking701 3 года назад

Do you strain the mean green to remove excess resin? If so, how often?

@chrislannon 3 года назад

@@lanceking701 No, I just dump the mean green when it gets pretty cloudy.

@RobPauza 4 года назад

Seeing that helmet in resin made me happy. It’s definitely thin on those ear holes. I may need to remedy that. Great video! Thanks. 👍

@UncleJessy 4 года назад

Wait till you see what comes next 😬

@RobPauza 4 года назад

Uncle Jessy ...If you do what I think you’re talking about, you are one crazy SOB. But I love you. 😘

@MigMonkey 4 года назад

@@RobPauza Now I'm intrigued.. haha

@MatthewWathen 4 года назад

Quick question: Have you attempted to recycle your Mean Green? I'm thinking that one might expose their contaminated MG to a powerful UV lamp for a certain amount of time to cause the resin to solidify, which you could then strain out and re-use the MG? As far as I know, there's no chemical reaction between it and the resin. Might make a good experimentation video.

@IdgaradLyracant 3 года назад

Time is money. The time to filter and reuse, assuming you pay yourself minimum wage, might be cheaper to just grab a few gallons from your hardware store.

@KentuckyFriedGamers 4 года назад

I am still using IPA and really have no issues with it, but again, I am only doing small prints on the Elegoo. If I get a larger resin printer this might be something that I take a serious look at getting, thanks for doing what you do.

@UncleJessy 4 года назад

I still use IPA in a pickle jar for my smaller prints. IPA still works really dang nicely compared to anything else I've used. Keep on print'n!

@KaelumYodi 4 года назад

I have the 6L Mophorn Professional Ultrasonic Cleaner (380w), as it was the smallest with a drain valve, which allows me to return the cleaner to the bottle w/o having to pick up the whole unit to drain it. I also use the 1G Simple Green Pro HD Heavy Duty Cleaner full strength, which has the exact same smell as Formula 409. Just cure the cleaner to cause the resin to precipitate out, and save the cleaner. When cleaning, 40-42 degrees for 5 minutes is the best for removing the resin w/o damaging the print. Then rinse with normal water over a basin. UV cured cleaner and waste waster, can safely be dumped on grass, as the cleaner is environment friendly.

@alfredopaez3538 4 года назад

Dear uncle Jessy...a little part of me dies inside every week that passes by that you don’t post the phrozen transform vs phenom video 😂

@thejetshowlive 4 года назад

Ditto. Every time I get a notification I think..."Oh, I hope this it the one!" (Hopelessly devoted)

@alfredopaez3538 4 года назад

thejetshowlive lol...I’m the same way

@UncleJessy 4 года назад

Haha love you guys!

@UncleJessy 4 года назад

@@thejetshowlive Haha coming soon to a fightclub near you

@thejetshowlive 4 года назад

@@UncleJessy Yo Uncle Jessy, Thats what I'm TALKING ABOUT! Big Ups to you for responding, I know you're a busy dude. But now you know I'm gonna be Eagle Eyeing the channel waiting with bated breath! Thanks Champ.

@SimonCoffman 4 года назад

I used to use the really really really really big units when I worked in band instrument repair. Like, big enough for a person to fit inside of they were curled up in a ball. I might dilute your solution a bit. The acid doesn't need to be as strong since you have vibrations helping with that process. It will save you money in the long run. I might have a video somewhere that shows how effective the vibrations are when cleaning. If this unit has a circulation pump, get a mesh drain cover for the bottom tank inlet. That will help with the longevity of your unit.

@ahab9715 4 года назад

So, I ended up acquiring a Peopoly Phenom as well. Loooooove the printer. I've had nothing but success right out of the box. That being said, your timing with this video is perfect. I was considering investing in an ultrasonic cleaner to use with the Mean Green I use on my prints. Side note to the Mean Green: I've found that it has a hard time cleaning Siraya Tech Blu resin. I mixed Blu with Peopoly's Deft Gray resin and got great results as far as print quality is concerned. However, hand cleaning the prints has not been easy. I've considered trying 95%+ Isopropyl alcohol, as that's what's recommended by Siraya Tech. Either way,i'll be nabbing the very same ultrasonic cleaner you've showcased in this video. Once again, you've come in clutch with some niche information that answers questions I otherwise would have a hard time finding answers for, haha. I'm using my printer for the same thing you are, so your videos always help a ton. Thanks for what you do.

@julianlsproduction6319 3 года назад

So I’ve been going back and fourth between what large format resin printer to get. Due to covid there’s been some pricing increases. I would love to see an updated video where you company your large format resin printers and also where you get your resin from/type. I need a bed large enough to print a human skull and maybe a few extra parts. As always thank you for the new content and keep up the great work!

@makermatrix9815 4 года назад

I think part of your issue was that the mask was sitting directly on the heating element. At least on the smaller 6L unit you can tell that the heating element is right in the center (if you put alcohol in the tank (but don't do that ;-) it will boil right in the center bottom every time the heating element comes on). If you could have made the basket work (or find/print some kind of standoffs to keep your parts off the bottom) then the heating might work OK without warping your part. I use heating on parts as thin as 2mm and while it DOES soften things up (nice for removing supports) I haven't seen the kind of warping you showed here.

@krismeulders4563 4 года назад

Usually the heating in this kind of cleaning tanks is on the long sides. The bottom is where the ultrasound elements are. Parts shouldn't touch the bottom because you dampen the effect that way, like a hand on a speaker.

@UncleJessy 4 года назад

oh that is great to know thats! Some really good info there!

@iiinsaiii 4 года назад

Great video, but you didn’t mention what resin you used. Because I’ve found mean green doesn’t work on all resins.

@UncleJessy 4 года назад

Sorry about that. Siraya Tech Fast it’s my go to resin amzn.to/2O7YnQD

@PestVic 4 года назад

Cant wait for the helmet build video!

@UncleJessy 4 года назад

me too ;)

@PestVic 4 года назад

@@UncleJessy Love your vids! If you want pics of fan made Mando helmets let me know! I just finished mine and it looks perfect :)

@jm2114 4 года назад

30L is the route I went, you also commented on that on the Phenom forum. Temp wise 30C is max on thin stuff or just longer scrub time with no heat. I do not pass 40C on Siraya or Peopoly. After drying from the wash and rinse I may use a spray bottle with some IPA for the last little bit of finish before curing. It takes away the small areas of tackiness. Good stuff Jessy :) - Oh let me know if you managed to print the sloped top for the Phenom, sorry about the scaling.

@UncleJessy 4 года назад

Haha oh man thanks for the reminder! I need to fire up a printer and get that going! very jealous on that 30L!

@jm2114 4 года назад

@@UncleJessy I also use the 30L to clean the Vat and Plate, really easy way to clean those. Point of interest, PLA version of the sloped top, "Do Not Use Heat" and it also affects the sealant you may use to bond it, so it it is a dip and pull until you get the desired result. FEP can use low heat to tune it but that is a fine line to balance, start 0 heat and then add 5 deg to see if it benefits with the caution on the side of "Ok this is a stop point - do not try well one more time can't hurt that much" ....... I will also emphasize - "DO NOT USE FLAMMABLE LIQUIDS IN THESE UNITS - IE IPA, DENATURED ALCOHOL, ETC". I use Mean Green as well :) .... Also, measure your drain valve, get a 90 deg or 45 deg connector with a flexible hose connector to make draining a little easier.

@originaltrilogy1 4 года назад

@@jm2114 Which 30L unit did you buy, do you have a link?

@SEANANIGANS32 4 года назад

Very well put together video, Thank you for all the info! I may have to invest in one of these in the future!

@UncleJessy 4 года назад

thanks brotha... yeah this is going to make cleaning parts a lot easier

@hightde13 4 года назад

With all the info out there now about resin machines and printing in resin I've been wondering about additives. Have you tried adding any casting resin mixins? Metallic Powders, pearl pigments, glitter flake, etc? There are uv craft resins out for some time and those types of items can be used to achieve some interesting effects so I'm curious if they will work with printing resin as well. The metallic powders in particular. If I could just buff out a grey/black print to bring out a metallic shine would be very cool.

@UncleJessy 4 года назад

Grab an Ultrasonic Cleaner for yourself ;) 22L Large UltraSonic Cleaner ➜ amzn.to/3aLqaQG another option if its still sold out ➜ amzn.to/2RzL51o 10L Ultra SonicCleaner ➜ amzn.to/2U6MWMX Affiliate Links

@xTHExEngineer 4 года назад

Uncle Jessy, I’ve been following you and am glad to see I made the right move getting this amazon cleaner 😅 I have a better G-Code for that Mandalorian helmet. I’m not the creator, but I’ve made it on both FDM and MSLA and it’s more stable and thicker. I use the Peopoly Phenom as well and the other was a CR10S pro modded.

@charlesschneider7079 4 года назад

I use a smaller version of the larger printer that you're using and use the heat function set at about 30C and use a smaller amount of time (Usually 5 minutes or less) and have no problem with warping on thinner parts.

@welbot 4 года назад

Looks like a great unit! One of these days when I'm not totally povvo, I might have to invest in one!

@francisquintero-quez-108 4 года назад

The Magneto Bust printed looks Amazing!!!, thanks for sharing :)

@UncleJessy 4 года назад

Amazing files man! Can’t wait to print it a lot bigger!!

@arvicz22 4 года назад

Wonder if a bathtub sized ultrasonic washer be effective compared to actually showering? It could get up in those nooks n crannies.

@UncleJessy 4 года назад

zzzzzbzzzzzzzbzzzzzzzz I'm all clean now!

@donjensenep 4 года назад

you can also use glass beakers with the IP in it and place that in the water bath. We do this at the lab i work at one it is safer two it uses so much less IP.

@Robbo1900 4 года назад

Yay you got the loudest ultrasonic cleaner on the planet!!

@crussty3d 4 года назад

That's not warp... That's battle damage!

@UncleJessy 4 года назад

Haha now that is practical printing... and thinking

@thejetshowlive 4 года назад

Phrozen vs Photon head to head review pls!!!

@EastwoodFabrication 4 года назад

No contest, Phenom!

@thejetshowlive 4 года назад

@@EastwoodFabrication I like the reply, thanks Boneyard...I would still like to see a review for sure. In your opinion why one is better than the other. Do you have any bullet points as to why you say the Phenom over the Phrozen?

@ForgeSpace 4 года назад

Have you since tried to preheat the solution? This may avoid the heat concentration at the bottom where the heating element is.

@kenshoning7532 4 года назад

Uncle Jessy, what resin do you recommend for gaming miniatures that is durable and not brittle? Maybe you should make a video about Water washable, Plant Based, and Rigid + Flex resins and which is best for printing miniatures.

@OldCurmudgeon3DP 4 года назад

OK, 1st off, zero research on my part. I haven't seen any videos talking about cleaning resin prints do more than mention (at best) that the solution can't simply be poured down the drain. How does one properly dispose of the cleaning liquid once it's too saturated w/ resin residue?

@UncleJessy 4 года назад

Great question. I normally hang a UV light over my containers or sit it out in the sun for a half day or so, the resin will cure and you can sift it out, throw it away, keep using the liquid.

@SF-vt3zr 4 года назад

Wheres the video that explains what this cleaning process is for? And the curing thingy too, I'm new to this do please and thank you.

@tylerwoods221 4 года назад

This would be awesome if you could combine this ultrasonic cleaner with UV curing. Could you put a UV light above this?

@edmonddyogi6411 3 года назад

How often do you change the mean green fluid?

@blizatrex 4 года назад

It's a beast.

@UncleJessy 4 года назад

It's a monster of a machine... waaaaaaay too heavy with all the liquid in it haha

@MeGetACoke 4 года назад

Lol i have the exact same model in my garage that i use a lot but i didn't know that i can use it for my 3d prints!

@UncleJessy 4 года назад

Oh nice!! Yeah fire it up for any resin prints you might have

@toltecnightmare 4 года назад

I'm hesitant. besides the price of the similar unit increasing quite a bit, i like to read the 1 star reviews on a product to average out the biggest problem, and they're almost unanimously about this brand dying between 1 to 1.5 years after use. I'd be interested in a follow-up at some point.

@thekid2485 4 года назад

how many prints can you run before you find that the mean green does not clean the prints 100%?

@UncleJessy 4 года назад

not entirely sure, I still have my 5 gallon bucket that I havent cleaned out at all and I've been using that for a good while now. I'm guessing I will need to swap this out a bit more frequently maybe every other month or so?? not sure but can try to give an update after I've kicked it around for a few months

@jm2114 4 года назад

@@UncleJessy Drain the tank once a week, clean debris out, set the drain fluid in the sun for 4-6 hours or under your UV setup if it is large enough, restrain the fluid with a filter and replace the missing amount in your tank. I get about a 70% return. These larger tanks will also heavily condensate on the lid (I am in FL so that may vary to your local) so be careful just flinging the top off.

@LEGO_Igor 4 года назад

Me: **sees that nobody made a joke yet** Also me: It’s free real estate!

@theGermanPrintingNerd 4 года назад

WOW now you need what 100 Liters IPA ?

@teyrasiridae4704 3 года назад

That would be extremely dangerous to put IPA in.

@ambroscustom 4 года назад

i will try to build this ultrasonic cleaner.

@goldfishyman7701 4 года назад

How about a long term update on this? Most reviews say these things break rather quickly.

@akura2 4 года назад

I have one of these... I got it from an auction thinking it was smaller... but when I got to the location and saw the box, I was like DAMN!!.... I only paid $30 for it tho... brand new

@MigMonkey 4 года назад

I have no idea what size to look for for my Mars that I'm picking up soon. Probably about a 6L. Canadian pricing is stupidly high.

@lanceking701 3 года назад

How soon are you doing a review of the Phrozen Sonic 8K?

@j.justin1511 4 года назад

Eye So Pro Pill Alcohol. Say it with me. :P Great video as usual! I've got the baby version of that monster cleaner. I'll upgrade as my machine size budget upgrades!

@UncleJessy 4 года назад

Hahahaha hahahaha hahaha thanks ;) one of these videos I will get it right ;)

@BreakingTaps 4 года назад

Ehhh, "isopropanol" is a valid designation for IPA, as well as 2-propanol and propan-2-ol (depends on which standard or legacy naming convention you are using). "isopropanol alcohol" is a little redundant but overall it's not incorrect ;)

@EastwoodFabrication 4 года назад

Friends in the Phenom fb group mention that Mean Green doesnt completely clean the parts. I notice you use this in a lot of your videos. Why not IPA 91%? EDIT: just got to the warning part lol

@UncleJessy 4 года назад

haha no worries. Yeah I have to run mean green for a good amount of time for it to really work. IPA still will clean better but makes me really sick to my stomach.

@weaponutjoe 4 года назад

Considering buying this through your link, but what are the internal dimensions of the well? Amazon only gives the outer dimensions. Thanks.

@UncleJessy 4 года назад

19x11x5.5 inches are the internal dimensions

@bdrmfg Год назад

I’m new to resin printing and I can’t decide between an ultrasonic cleaner or a Wash & Cure machine, what is better?

@cameron9915 3 года назад

Bought a brand new vevor 6l and all it does is flash lights at me, support has been useless. Recommend going with another company altogether. They couldn't even provide troubleshooting support.

@imothy 4 года назад

What resin are you using? Thats the only thing you didn't link in your notes...

@UncleJessy 4 года назад

Siraya Tech Fast - adding that to the notes. Thanks! amzn.to/2u1dmFi

@Provokedcarp 4 года назад

What is your protocol to clean the ultrasonic after you finish using it to clean a print? How often do you do it?

@aaronbyrne-colgan186 4 года назад

Awesome as always! Would love to hear your opinion on Phrozen Shuffle XL vs the new Epax X10

@alecsapounas7497 3 года назад

Hi Do you still like the ultrasonic cleaner machine ?

@SaltyTrekker 4 года назад

man this is killing me... I see all these great solutions on your channel and every time it is either sold out or the price has more than doubled... thanks COVID for ruining my day... again...

@DJlegionuk 4 года назад

It could be you placed that thin part close to the heating element.

@UncleJessy 4 года назад

Yeah... clearly i know what im doing haha

@DJlegionuk 4 года назад

@@UncleJessy I wise man once said "failure is always an option"

@jamessmallwood7448 11 месяцев назад

heating it safe?

@simonbraun5025 2 года назад

I have zbrush for designing in 3D. My question is blender a better product and if so why? I already have zbrush so free isn't a good reason.

@cmarcrum25 3 года назад

Have you tried the IPA in the Ultra Sonic Cleaner?

@cmarcrum25 3 года назад

Sorry, take backs. Commented mid video

@nikilragav 4 года назад

thoughts on cutting off supports first before mean green?

@LEGO_Igor 4 года назад

Can you make a life size version of me?

@UncleJessy 4 года назад

getting right on it!

@agentjay4494 2 года назад

could an ultrasonic cleaner be used for PLA/ABS 3d prints to reduce print lines or nah?

@lion9854 4 года назад

In your previous videos you have said you can't tell the difference in using one of these and hand washing so why buy it

@UncleJessy 4 года назад

Because the water washable resin costs more and I already have A LOT of Siraya Tech Fast Resin amzn.to/2u1dmFi

@c.leondyson3416 4 года назад

Thx for the video!

@ManyLegs 4 года назад

Hi Jessy. I am interested in printing custom action figure parts, but for now, I am still not sure what technique should I approach. Is it possible to print action figures with ball joints using a resin printer, or should I purchase a "normal" 3d printer and do plastic recasts? What would you recommend?

@cloroxbleach6673 2 месяца назад

What kind of resign did you use for the prints?

@TheSomar1991 4 года назад

Those are cool im wondering about the difference between those and the ones like creality 3d's cleaner you know with the rotary thing

@TheIcemanModdeler 4 года назад

What do u do if the printer are tacky after washing and u don't have an ultrasonic cleaner?

@cesargarcia6786 3 года назад

Hello Uncle Jessy, do you leave the IPA inside de ultrasonic cleaner? or do you safe in the bottle to prevent evaporation?? Thanks for yours videos, hi from spain :))

@ctbram0627 4 года назад

what r the dimensions? That model is sold out but there is another that look identical says 22L with dimensions 20.5" long x 10" tall x 13" deep which to me sounds smaller then yours looks

@MicheleHjorleifsson 4 года назад

4 questions, link for meangreen ? do you prefer the transform or the new peopoly ? how are you curing the larger parts after cleaning ? Have you tried printing with ABS like (stronger) resin?

@mackenzie.alexander 3 года назад

Where’s the mandalorian video!?!? 😭

@녕다-x8r 2 года назад

set up easy

@MisterMakerNL 4 года назад

Thanks for screwing up your mandelorian helmut for us ;)

@blainetsukayama4513 4 года назад

do your prints feel tacky with mean green and curing after

@jrami223 4 года назад

@unclejessy what resin printer do u recommend?

@UncleJessy 4 года назад

Depends on what you're looking to make but I looooove the Elegoo Mars (link in my video description above)

@jrami223 4 года назад

@@UncleJessy I make action figures about 6 inches tall 3-4inches wide. Can u do a step by step how to resin print can't find a video

@lanceking701 3 года назад

Can you run it with the heater off? I also saw your PSA but I like the size of this thing as I just bought a Sonic Mighty and the Sonic 8K.

@UncleJessy 3 года назад

Yep you can and I do both now. On when I want to warm up the liquid which helps remove the supports from a print and without when I just want to clean

@lanceking701 3 года назад

@@UncleJessy I was looking at these on Amazon. There are different sizes. How many liters is your machine? There is a similar unit that has a timed heater. BTW love all your videos!

@lanceking701 3 года назад

@@UncleJessy Wow using the number on the side of the box I found that is a 22 liter vessel! That means it can hold about 40+ pounds of fluid!

@VitaliiThe 4 года назад

On small preview I thought it's Rick Grimes from Walking Dead

@NadEl114 4 года назад

Man we need t chalas tribal mask black panther

@dasmith152 3 года назад

What curing machine do you use?

@EastwoodFabrication 4 года назад

Its no longer available on Amazon :(

@TGFlashera 4 года назад

Does this work for PLA?

@3DHP 4 года назад

Great Job,Go Big or Go Home..

@UncleJessy 4 года назад

hopefully its big enough haha

@chrisalton1 4 года назад

are nerds not tired of mandalorian helmets and yodas yet?

@UncleJessy 4 года назад

Nope ;)

@StephenZura 4 года назад

Mean Green? I thought you had to clean resin prints with isopropyl alcohol

@krismeulders4563 4 года назад

Be careful with IPA. It cleans great, but then don't use heating (manual should actually say you can't use IPA or any other solvent). Also keep cleaning times short as ultrasound itself produces heat as well.

@TheHoody999 4 года назад

@@krismeulders4563 I've used IPA in my ultrasonic cleaner a couple of times for like 1 minute or so. It doesn't have any sort of heating function. Is it only the heat which creates the potential issue of a micro explosion ?

@krismeulders4563 4 года назад

@@TheHoody999 If you are careful with the temperature you shouldn't have any problems. I've been working with and selling them for over 10 years now. We don't work with IPA as we have to give the example, but customers do anyway. Never heard of problems.

@TheHoody999 4 года назад

@@krismeulders4563 OK thanks man. I think I'll go with the method which someone else mentioned here. i.e Mean Green in US Cleaner, then IPA in pickle jar to get rid of green remnants then finally rinse in water. Only problem is finding a Mean Green equivalent in Germany.......can't seem to find anything.

@krismeulders4563 4 года назад

@@TheHoody999 I don't know Mean Green. A (very) quick look tells me it could be similar to Dasty. Pretty popular in Belgium and the Netherlands with people that know it. So chances are you can find it in Germany as well.

@forkgod 4 года назад

So many innuendos. So little time.

@melting3d 4 года назад

never ever use a ultra sonic cleaner with out the basket ,what ever your cleaner should never touch the tanks bottom that's basic use its in the manual...

@originaltrilogy1 4 года назад

Anyone know of a mean-green equivalent in Australia? BTW the safety sheet for mean green is here www1.mscdirect.com/MSDS/MSDS00014/97842033-20160113.PDF

@bigjeff4519 4 года назад

yep i bought the 6 litre and its huge ,so that must be massive

@CookieManCookies Год назад

Downvote for buying a huge ultrasonic cleaner, and not recording how loud it gets.. comon bro. Really??

@Coophack6584 4 года назад

I do not recommend Uncle Jessy's channel for beginners. I'm sorry but it true. He makes nice stuff but doesn't explain or show how.

@UncleJessy 4 года назад

‾\_(ツ)_/‾

@jm2114 4 года назад

Sorry to hear that - I actually have gotten several great ideas from him and his videos and have been very successful at it. His channel is interactive and if someone is having a issue, beginner or expert, I think the responses are there to add to the learning of the process.