Hello. I bought a panel with your Huidu hd-w00 controller. The panel worked perfectly, but after about 10 starts it stopped working. The red "Power" light on the controller is on, but the "Run" light is not. What could be the problem? Thank you
Hello, I am using Huidu W00 wifi controller...How to update its firmware using the mobile app ? I am unable to update its firmware using mobile ...need your help
hello, first need download newest firmware in the mobile APP ledart, then connect the controller wifi by mobile and run ledart, you will very easily find the option of "firmware update" in the APP interface, then just click it and choose firmware to update. You also can message us on WA: +8613510540791 ,we will show you screenshot instruction.
Hello, please help, there are 10 scoreboards of the same, how can I send all the files at once with one button, without manually attaching to each scoreboard. Because when you change the speed voltage, you need to change the settings file for each scoreboard 10 times, connect to the Wi-Fi board 10 times and send the file 10 times. I use the hd2020 program
In the LED display, the ratio of the number of lines lit at the same time to the number of lines in the entire area is called scanning mode. The scan is also divided into 1/2 scan, 1/4 scan, 1/8 scan, 1/16 scan and other driving methods. That is to say, the drive mode of the display screen is different, so the settings of the controllers are also different. If the controller was originally used on the 1/4 scanning screen, but now it is used on the static screen, the display on the display screen will be lit every 4 lines. Generally, different scan mode of LED display, the controller settings will be different. After connecting the control card, display screen, computer and other main components, you can enter the Huidu software on the computer or APP to set by smart settings. let me also teach you details of the scanning mode and principle of the LED display. 1. LED display scanning method: Classification of LED display scanning methods: Scanning mode means that in one single LED module, the ratio of the number of lines lit at the same time to the number of lines in the entire area. (1). Static scanning: Static scanning is to implement "point-to-point" control from the output of the driver IC to the pixels. Static scanning does not require control circuits, and the cost is higher than dynamic scanning, but the display effect is good, stability is good, and brightness is lost. The advantages of being smaller, etc. (2). Dynamic scanning: Dynamic scanning is to implement "point-to-column" control from the output of the driver IC to the pixel points. Dynamic scanning requires a control circuit, and the cost is lower than that of static scanning, but the display effect is poor and the brightness loss is large. . 2. Classification by model: (1). Scanning mode of indoor full-color LED display: P2.5, P3, P4, P5 are constant current 1/32 or 1/16 scan, P6, P7.62 are constant current 1/8 scan. (2). Scanning mode of outdoor full-color LED display: P8, P10, P12 are constant current 1/2 or 1/4 scan, P16, P20, P25 are static scan. (3). The scanning mode of single and double color LED display screen is mainly constant current 1/4 scan, constant current 1/8 scan, and constant current 1/16 scan. 1/4 scan: Under the same other conditions, the 1/4 scan display is only half the brightness of the 1/2 scan display, which is suitable for semi-outdoors and indoors. The control method is to increase from 1/2 of two LEDs to 4 LEDs. The current is swept across the 4 LEDs. 1/8 scan, 1/16 scan: These are driving methods with lower brightness, and are generally only used indoors. They are controlled in the same way. 🙏🙏
Hi, iam programming hd-w00 controller prayer program using HD2020 . Its mention about prayer audio module that can play mp3? Where to upload the mp3 and where is the loudspeaker output? Thanks
W0 control range is 32x320 pixels, that means that if your P10 module is 16x32 pixels, it can max can support 20 boards. when any requirements, also welcome consult wechat and whatsapp: +8613510540791, you can be had answer in time there.
W00 doesn't have button input function. Had better use W6x series card, such as W60, W62..., they support to add button on board, this is tutorial details 👉ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-f0xOz4laQqQ.html
yes, in setting, you can switch language to English. When any requirements, also welcome contact HUIDU wechat and whatsapp: +8613510540791 directly, you can get respond there quickly.
@@HuiduController worship times or worship schedules on the HD2020 / HD2018 PC application like this video, in the 8.47 minute section. My city doesn't exist, and I can't find it even though I update the HUIDU app ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Q4seWCtoKM8.html
Hi, you can reset up it. 1. Reset up steps: 1) Disconnect the power of the controller first; 2) Then press and hold the S1 test button on the control card and do not release it; 3) After the display is powered on, wait for about 10 seconds then release the test button. 2. When the firmware version is above v4.24, there is another method: Under power on, just press and hold the test button for 10 seconds, the password will be restored to 88888888 (this operation will only change the password, won’t reset the screen parameters)
@@HuiduController ок. спасибо! столкнулся с проблемой калибровки на контролерах HD-WF2, не получается откалибровать для модуля P8 3535 320Х160 5S YSV1.0., хотя с контролером BX-6Q1 без проблем калибровалось, в чем может быть проблема?
Reset up steps: 1) Disconnect the power of the controller first; 2) Then press and hold the S1 test button on the control card and do not release it; 3) After the display is powered on, wait for about 10 seconds, if the running light flash fast, then release the test button. When the firmware version is above v4.24, there is another method: Under power on, just press and hold the test button for 10 seconds, the password will be restored to 88888888 (this operation will only change the password, won’t reset the screen parameters)
I have exactly this board. But somehow the password is not working. I guess that the former user changed the password. Is there a masterpassword or something like this or an opportunity to reset the password? I really appreciate your help!