😊👍🙏 I would normally say thank you for that, But I'm not responsible for the Trees and snow, That's all Mother nature's doing, I'm just lucky enough to live here.😉👍 Thanks for your Awesome Compliments, and for checking out the video my friend.😁👍👍
😊👍 Definitely important, Your not kidding man,😁 Every time I lost material out of the bucket, I would gain a little bit of disappointment,☹️🥺 it was killing me,🙄 and now it's much better,🤗😂 lol Thanks for your Great Compliments, and for checking out the video my Brother.😊🤜🤛
😁👍 Thanks Matt, it's certainly not the first Huina 1550 to be modified, but it's on its way to being one of the more unique 1550 builds, by putting my personal mark on on it, 😁👍 lol As for the Bucket; It needed that more than anything else,😂 lol what a difference 100% 😊👍 Thanks for your Awesome Compliments Matt 😊 And many more for checking out the video my friend.😁🤜🤛
I actually did a video on the complete install if you are interested in seeing that, it's better than most of the install videos that are on RU-vid.🙄 Otherwise the Answer is that the Longest servo gets mounted on the under side of the main boom, for raising and lowering the main boom. The medium size servo goes on top of the main boom for moving the secondary boom in & out. And the shortest servo goes on top of the secondary boom for moving the Bucket in & out. 😁👍 Thanks for your Great Question, and for checking out the video my friend. 😊🙏👍👍
😊👍 Thanks Jeffrey It was a well needed modification,😁 there's not much point in being able to get a Full Scup of Dirt, if you loose half of it, before you get a chance to upload it,😂 It's much better now 💯% In my eyes, it should have curled back that far from the beginning,🤔🙄😂 Much appreciated for your Awesome Comment, and for checking out the video my friend.😊🙏🤜🤛
😁👍 yeah man! It needed that from day one, I started working on it, before we were finished talking about it, 😊😂👍 I was like 🤔 hmm, and it was on! 😁 Lol Much appreciated as always for your Awesome Compliments, and for checking out the end result of our conversation. 😂😄🤜🤛
That was definitely a good move Jim. Not really sure what that brace was for but it was no doubt hindering the movement of your bucket. Good call buddy! 😁👊
Thank you Bob 😊👍🙏 I believe that in the real world, That cross-member on the bucket linkage, is supposed to balance the load on the linkage pin's & the linkage itself, When the bucket is getting a sideways bite on something,🤔 at least that's the only thing that I can come up with off the top of my head,🙄😕😂👍 Either way, Removing it on the "RC version" made one heck of a difference,😂👍 Thanks again for your Awesome Compliments, and for checking out the video Brother.😊🤜🤛
You have the same thing as I do, you just have to look at it and think "I can make you better" 🤣 I'm currently building a 1/14 Semi Tractor and Trailer and I've already taken a saw, glue, filler and fine grit to it, then ordered update parts BEFORE I've started assembling it.😆 I really dig how you do close up work so folks can see what and how you do things 🤔 And I wish it would snow here more than it does, we had 1" here and it lasted 1 day before the rain came and I had no time to get the Little Mule out in it.😣 Stay warm and stay safe Jim 🤜🤛
😁 Same Zee's 👍🤜🤛😂 Always looking to improve stuff 💯% 😊👍 As for showing people the finer details, while working on stuff; I feel as though it's Absolutely necessary 😊 In my eyes, that is the whole point of doing, a "How to" video, No point in showing everyone how to do something, if the audience can't see what you are doing, or understand the reason behind doing it, to begin with,😉👍 I try to explain things, so that everyone can understand,😊 As for your new truck and trailer,😁 I can't wait to see it after your finished, and my imagination is running Wild "no pun intended" wondering what your next movie themed Rig, is going to be,😁👍 I have some ideas of what it could be, but I don't want to Ruin any surprise for you, or myself,😊🤜🤛 Bummer about your snow situation,☹️ it's actually been a somewhat snowless winter here as well,🤔 much less than we normally have on the ground at this time, although it's currently snowing right now,🙄😕😂 We have been getting snow on a regular basis, but the quantities have been much lower,🤔 Having said that, we will probably get nailed with snow from here on,😂 As for Pepe, he should be happy with a muddy field of crops to go tearing through, 😂👍👍 Speaking of which, it would be so cool, if you could come up with all three of the characters to ride in the Bronco,😊 The Bell maker, Joan W. & Jack C. And maybe a Danny D. Trailing behind in a beat-up Citron, 😂😁👍👍 lol That would be Awesome! 😊👍 🤞Hopefully🤞 you will get a little bit of snow before the end of the season,😉👍 If you feel like hopping on a plane, you are more than welcome to bring the little mule over, for it's First Snow Adventure,😁👍 Thanks for your Great Compliments Teri 😊🙏 And very much appreciated as always for checking out the video my friend.😁👉🥇
@@R.C.A.D. I got to a stage that I won't say it on a video :P Especially for me, it's to do with my native language-makes it even funnier! Keep up the good work!
😕 hmm.. I have to apologize Juanjo but I don't speak Spanish my friend, But I'm kinda thinking that you might be asking what the limitations are for the worm gear servo's, 🤔 And that is around 11'Lbs, or at least that's what my fishing scale was saying, After that...they stall out. 🙄😕 But I have to tell you that 11'Lbs is pretty good, it's definitely strong enough to do some work,😉👍 and it's also strong enough to do some Damage to the Boom arms if you're not careful.🙄😢 Hopefully I answered your question,😉👍 and Mucho gracias for checking out the video my friend.😊🤜🤛
@@R.C.A.D. Sorry I DIDN'T REALIZE THE LANGUAGE, I ASKED ABOUT THE LIMITERS, SEEING THAT SOME PLACE THESE LIMITERS TO NOT DAMAGE THE ARM. THANKS FOR YOUR PROMPT RESPONSE!
no worries Juanjo 😊🤜🤛 "Limiters" I highly recommend them 😄👍 Major "Accidental Damage" can, and Will, most likely happen.😦😵🤦😭 I currently have a set of the aftermarket "all metal" boom's, along with the full set of (6 qty) servo limiters, 😁👍 I've actually had them for a few months now, but I haven't gotten around to changing everything out as of yet,🙄 Too many other RC projects in line, and that wasn't, or isn't my highest priority at the moment.😊 But Yes.. I Totally Recommend servo limiters. 😊👍👍
@@R.C.A.D. Thanks for your answer! I hope you have time and you can upload the video of how to connect these limiters😅, I am waiting for the servos to arrive, so I modify my 1550, I just don't understand how to connect the limiters😔. Thanks again for answering my question. greetings from Argentina. Excellent channel and content! 👍
My pleasure Juanjo 😊👍 I'm currently doing a upgrade video on the 1593, and after that I'm doing a upgrade video on my 1580, And after that I'll probably tackle the 1550 project.😊 Great talking with you Juanjo I hope all is well in Argentina 🏖️ and Greetings to you from Northern Michigan USA.😁🤜🤛
