No video :(

Hunter MP Rotator Sprinkler Head Fix

Подписаться 71

Просмотров 29 тыс.

50% 1

Hunter MP Rotator Sprinkler Head Fix
I forgot to mention. This method should be used as a last resort. Make sure that your sprinkler head does not have any debris in it first. Also make sure that your water pressure is adequate and the filter screen for the sprinkler is clean.
Disclaimer:
Due to factors beyond the control of QuickVid, I cannot guarantee against improper use or
unauthorized modifications of this information. QuickVid assumes no liability for property damage
or injury incurred as a result of any of the information contained in this video. Use this information at your own
risk. QuickVid recommends safe practices when working on equipment and or with tools seen or implied in this video. Due to factors beyond the control of QuickVid, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular
result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not QuickVid.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@andrewpiazza1001 25 дней назад

Just fixed two of my newly installed heads by doing this... he's not kidding when he says don't take too much grease out, I took enough to cover the blade of my screwdriver out and it made a big difference. Less is more, I would say.

@kevincoverstone6479 Год назад

This help me a lot and save my parents money to not have to hire company to come out and do it. They would’ve had to wait two months because it’s summer.

@ablomaz 2 месяца назад

Thanks for the video. There is way easier way to open it. No need to use screwdriver. Remove the filter then rest the bottom to some hard and stable surface and then push down only blue part with your fingers. The middle black part will come off.

@joenastasi4669 2 месяца назад

I tried this and it worked. saved a few bucks

@kzs985 5 месяцев назад

Finally, this method worked for me, thanks :) I fixed 3 heads today, and all of them looks good. I was tired that even new heads can stop rotating after a year.. (some is okay for years, not sure whats causing it)

@quickvid6735 5 месяцев назад

Same in my experience. I got some that are 10years old others only last a year or two.

@wattsupwiththat1463 Год назад

I wonder if pool lube would work. I have a half dozen of these that don't seem to rotate properly. I tried this and it took less than 5 min from start to finish. It's didn't work at first, but I manually spun it and it started spinning. I'll have to try these on a few other heads. I used a tooth pick to distribute the grease. Thanks!!

@nonickx 2 года назад

Followed the instructions and it worked brilliantly! Thanks a lot!!

@watdahel Год назад

I wonder if that's damping grease they used. It's used in volume knobs and tripod heads to give a smooth and slow action.

@germandiegogarciasalazar5031 Год назад

Un My case it's spinning too fast. Do You know what could be done un order to have a lower movement?

@quickvid6735 Год назад

Pick up some Bel-Ray waterproof grease and add some to the head.

@MTbiggun Месяц назад

I think it’s non hardening silicone, not grease.

@quickvid6735 25 дней назад

@@MTbiggun I’m going to have to try that. I’ve got some super old ones that just won’t turn no matter what I try.

@troymcdonald Год назад

Somebody has to know what grease that is… Have you found out yet? Thanks for the video.

@quickvid6735 Год назад

I’ve had some success with Bel-Ray water proof grease. I’m sure any waterproof grease will work.

@alexsallery 6 месяцев назад

Do you know roughly how long it should stay 'fixed' for before you have to redistribute the grease again?

@quickvid6735 6 месяцев назад

They typically last the rest of the season for me.

@tbasshandyman7610 2 года назад

ty great help

@chenrapoport1720 2 года назад

Thanks

@quickvid6735 2 года назад

Glad I could help!

@chen863 2 года назад

@@quickvid6735 actually they worked but after a few days they stuck again. i need to help them at first. maybe remove more grease? do you have a recommended grease?

@quickvid6735 2 года назад

@@chen863 you can try removing more grease, but as stated in the video, if you remove too much they will spin very fast. I don’t have a recommended grease but I would look for something water proof and a NLGI 4 rating.

@quickvid6735 Год назад

@@chen863I have had some luck with Bel-Ray water proof grease.

@Sir_Mack 11 месяцев назад

Dude these heads are like $6. Just buy a replacement.

@betha3603 11 месяцев назад

Where?

@quickvid6735 11 месяцев назад

To each their own.

@Sir_Mack 11 месяцев назад

@betha3603 well I commented twice trying to tell you where to get them, but apparently SOMEONE must be reporting my reply for some reason cause it keeps getting deleted. Lamest thing I've ever seen as I was just trying to help someone out. Just go on line and search hunter mp rotator heads and there's multiple places that sell them.

@SuperGirda 5 месяцев назад

$6 where?..😂

@johngartman3845 9 дней назад

It's refreshing to know that someone in this we-need-more-plastic-trash society just does a simple 5 minute repair, rather than driving to the store or calling the great Amazon machine. But if it's all about the $, surely you're right.