Husqvarna Leaf Blower SPARK Issue DIAGNOSIS.

Подписаться 37 тыс.

Просмотров 3,6 тыс.

50% 1

If your Husqvarna leaf blower won't start, this video will teach you how to diagnose it! Using a simple stepy by step process you'll save money and time too!
TOOLS I USE:
Engine Tachometer - amzn.to/3TE48GZ
Mityvac Pressure & Vacuum Tester - amzn.to/3vysI3V
Gasket Maker - amzn.to/4bIiygR
Vessel Screw Drivers - amzn.to/3ISewG2
Brass Hammer: amzn.to/3xkyuH6
Stanley Stump Vice - amzn.to/3waHuOw
Stens 750-120 Carburetor Adjustment Tools- amzn.to/4atkBV5
Powerbuilt- backtap - amzn.to/49I9305
Forceps - amzn.to/4a2ud9v
Zoom Oil Bottles - amzn.to/3TWZV2t
Mityvac Compression Tester - amzn.to/4aimaFS
Bondhus Hex Keys - amzn.to/3J2m8FL
Klein MM400 multimeter - amzn.to/3PI3Y02
Stahlwille Combination Spanners - amzn.to/3IY6fQI
Milwaukee 12v Impact Driver - amzn.to/3VEuxH4
Milwaukee 12v Impact Wrench - amzn.to/4aPESVd
Milwaukee 12v 90 degree Grinder - amzn.to/4czLiJp
No-spill gas can - amzn.to/3TDfWcb
Any links to products are likely to affiliate links and I may earn a small commission from qualifying purchases with no additional costs to you. Thank you!
#husqvarna #ignition #smallengine #repair #2strokeengine #leafblower

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@haneyoakie14 Год назад

I had never thought about that safety issue. Thank you for teaching us.

@VintageEngineRepairs Год назад

Me neither until seeing how it works 😂

@grasscutterpalmer3746 Год назад

great video tom glad you found out what was wrong with it I am having problems with a airbos leaf blower I have put a new carb on it and tuned it but still not getting power

@VintageEngineRepairs Год назад

Ah no! Best of luck with finding the issue 👍👍

@tinkeringtaylor3053 Год назад

Good information, Tom well done for solving the problem 👏🏻

@VintageEngineRepairs Год назад

Thanks for watching Nev!

@Big_Johns Год назад

Nice work on the trouble shooting Tom, the outcome made sense. 👍

@VintageEngineRepairs Год назад

Thanks John :)

@TheLawnmowerLady Год назад

Nice video! I've gotten oddball readings from coils on occasion (read: unable to reliably duplicate) when I still have them attached to the engine. In my past life on component level testing and repairs, I learnt to remove the component from the circuit before testing. I think that spilled over to my small engine repairs. Do you ever add any top end lube when turning the engine over with a power tool?

@VintageEngineRepairs Год назад

Very good call for adding oil, I just didn’t want it to splash around everywhere, I believe it still draws in fuel without the plug as the vacuum is below the rings? Not sure! I take coils off the engine when I do points ignition as the capacitor can mess with you :) thanks for sharing and lovely chatting earlier!

@mrtennessee6862 Год назад

Great job again bud.

@VintageEngineRepairs Год назад

Thanks mate 👍

@jjrotogeek Год назад

good show brother!

@VintageEngineRepairs Год назад

Thanks mate!!

@GuysPlayingWithTools Год назад

Having the spark not come back immediately is odd for sure. I thought about the circuit for a while, and heat seemed to be the only factor... but it's not hot.

@VintageEngineRepairs Год назад

Haha I think you missed the part of the video where I figure it out 😂

@GuysPlayingWithTools Год назад

@@VintageEngineRepairs No, I was just thinking out loud. I have seen hot ones do that every now and then, where they work again after cooling but there is a bit of time where they won't run.