Én is vágok derékig érő füvet vele. De ahhoz ki kell venni a vágóasztalból A “bio clip” tartozékot, és előre hátra kell menni vele, mint amikor kézi varrásnál öltessz a tűvel. Először előre 1 métert, hátra 1 métert. Utána előre 2 méter hátra 1 méter, majd előre 2 méter hátra 1 méter és így tovább. Ezzel a módszerrel tökéletesen levágja a 80 cm magas gazt is 5-7 cm magasra. Ennél a hidrosztatikus hajtásnál egyszerű, mert csak egyik pedálról a másikra kell rakni a lábadat.
Sorry to see that you are not using your mower correctly, if used correctly that mower will cut that tall grass with no problems; I’ve seen it done. For starters you should not pull that accessory in the beginning it is not good for that mower in the beginning as it will stress the mower, and you are using the wrong cutting deck setup on your husqvarna, what's needed is to set your cutting deck up to side discharge the cut grass and in the beginning you may wish to check your cutting area for hazards that may hurt your mower such as stones, and other debris to prevent cut tires damaged cutting blades etc., but just as important raise the cutting deck height to its highest setting to discharge the clippings on your first few passes and around the second or third pass you can lower the cutting deck in increments as you cut. And maybe by the third or fourth pass you should be at a height to mulch and or to add your rear cutter mower accessory, but not in the beginning as you were trying to do. I wish you luck and do another video when you get the hang of it; you have a great mower don’t hurt it, enjoy.
