HVAC Controls-PID Controller-Introduction with Details and Comparison with P, PI & PID

Подписаться 19 тыс.

Просмотров 11 тыс.

50% 1

This Video explains about the PID Controller (the most common and most widely used Control system in Control Applications) basics, introduction and details. Also comparison with P, PI & PID combinations and the further advancements in the Control Systems.
For learning about the Building Management System or the Building automation system please follow the below link:
• BMS Building Managemen...
Building Management System Basics and History with Features
For learning about the Air Handling Unit (AHU) Fundamentals with Cooling Principle and its components please follow the below link:
• Air Handling Unit (AHU...
Air Handling Unit (AHU) Fundamentals with Cooling Principle and its components
For learning about the BMS Monitoring & Control of AHU Components and Sensors please follow the below link:
• BMS Monitoring & Contr...
BMS Monitoring & Control of AHU Components and Sensors
• Understanding the conc...
Understanding the concept of Control System - Basics, Open & Closed Loop, Feedback Control System.

Наука

Опубликовано:

23 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@yungerallenelectricalcontr6415 2 года назад

This is my new favorite channel.

@chahinezmazouzi2526 2 года назад

I'm really amazed about how specific and yet clear and short this explanation is! If you're a teacher, then your students are lucky x)) Thank you so much and hard luck.

@engineeringautomation 2 года назад

Hi Mazouzi.. thanks a lot for your feedback.. appreciate it👍

@karanmore6015 2 года назад

Very useful for instrumentation engineering students ❤😇

@balakrishnabathula1038 3 года назад

Subject delivered along with visuals superb👌👌👌👌

@engineeringautomation 3 года назад

Hi Bala.. thanks a lot for your feedback. Please subscribe and support us.

@kishanlal6520 3 года назад

Informative 💯👌👌

@engineeringautomation 3 года назад

Hi kishan.. thanks a lot for your feedback. Pls keep supporting👍

@Captain-Empire 9 месяцев назад

சூப்பர்

@engineeringautomation 8 месяцев назад

Hi captain… thanks for your feedbak

@jagatheeswaranmagalingam173 3 года назад

Very use full explanation...... Can u please explain about how to check working condition of all BMS sensors by multimeter..

@engineeringautomation 3 года назад

Hi Jagathees, thanks a lot for your feedback. To check BMS sensor, there are 2 types, sensors which requires external power supply and sensors that do not require any power supply. Sensors with external power can be checked by connecting external power supply and measuring the Output Voltage/current with multi meter. While measuring the voltage cross verify with the data sheet that the read voltage matches with sensor scaling. For passive sensors such as RTD, you can measure the resistance and verify with data sheet. For VFC contacts such as DP switched, you can check for continuity on the terminals by activating the DP Switch. Hope this helps. Kindly share and keep supporting.