Just starting to build some cnc equipment. Thank you for your teaching videos. If you get time a video on wire ends/ connectors would be awesome. Like the ones for the arduino pins. male and female connectors. and the proper names. Thank you so much.
Thank you for your support. Arduino boards shouldn't be used for CNC production robots as they are unstable. A Google search on this will reflect the many issues end users have. Thank you, Vince
@@corvetteguy50 thank you so much for the info on Arduino boards. We will look at picking a different board. we are building a cnc plasma cutter and a cnc router.
You should be using an ethernet board/controller as it will provide the most stable platform for your robot. I recommend my UC-400 turnkey package from my store if you're looking for a controller. Thank you, Vince
hi im about to convert a mill over to cnc and ran into something. maybe you can give me your input. i got some nema 34 stepper but the connections for them only come at 18/4 unshielded. i just built my plasma cutter with different motors i had to manually wire and made sure to use shielded cables i could ground with 5 pin connectors. i could remake these cables its just weird shielded wires arnt stock on them. how much would it matter if the first few feet coming off the motors arnt shielded?
Thank you for your support. There's now way to answer your question as its impossible for me to know the shop environment your installing the system in. I will tell you though a few feet is arbitrary, and in best practice using the proper double shielded cable provides end uses piece of mind if they're installed correctly. Thank you, Vince