Bleed the mater cyl. first. Connect a short hose to outlet then back into reservoir. Operate it add fluid operate til bubbles stop. Connect brake line to master cyl. and caliper. Bleed system.
I like it. It looks like the kit I just ordered yesterday for my Manco. The only issue I can see on your setup is, The bleeder on your caliper really should be higher than the banjo joint on the hose. It is damn near impossible to get all air out of the system if it isn't.
I bought the same master cylinder and caliper setup.im having trouble bleeding the system.im not getting any pressure to stop it at idle.did u have issues
@@Noeladventures im happy to hear that lol.im spending hours on bleeding it and not getting no where.i wanted to make sure it wasent a bad caliper.thanks buddy
@@EvrttGrn nope its just sitting in the garage.i tried so many times hours at a time,and it still wont build pressure.the bleeder valve is higher than the caliper also
Honestly it doesn’t grab as hard as mechanical ones I’ve used in the past. But then again I wasn’t able to get all of the air out the line either. Get one with some sort of small reservoir that connects to brake cylinder. That way you can get a better bite.