Hyundai i10 Radio fascia removal 

Glad you enjoyed! Modern cars can be a pain but when you can see how they fit together the job because easy

thank you and well done

Just me, I try to restrain it but fail every time

Yeah, I did the same yesterday, I found the gap trying to go between the fascia panel and dash far too tight, so did as you did and went in with just a food knife between the radio and fascia panel, which was a lot bigger, and it came out pretty easily, this video is very helpful though in showing the position where the clips are located, just have to source a new radio and fascia now to replace the totally dead original unit from new, 09 plate car, so I suppose 12 yrs is not bad.

You can do it now! get some plastic levers, they are usually softer than the fascia

Glad it was helpful!

What u did to ur aux

your choices as it is your car. search for the aftermarket cage first. whether you want double or single DIN will depend on that. Not really my speciality really

@@churchhouseclassics so both din types fit in this chassis?

As ever, I am delighted to have helped in any way 👍

Sorry I have not

@@churchhouseclassics Thanks for reply, Happy Holidays 🙂

I have no idea, sorry but there must be a way

glad it was useful, I have seen a couple of different double din cages for these cars, google "hyundai i10 double din" some seem to replace just the head unit section and others replace the whole shebang.

Sorry, I don't know the answer to this question.

I tried to remove the stereo in my wifes 2012 i10, but failed. My local mobile fitter came round, and confirmed this car was one of the most difficult to change the stereo. He dropped the glove box and pushed the fascia out from behind. Also, you will have 2 options of replacement fascias. Get the one that replaces the whole fascia, including the air vent surrounds, not the one that just replaces the space left by the old stereo, because they dont fit very well. I hope this helps someone.

Google "hyundai i10 radio fascia" and you should see a few options and suppliers

In the UK we have adapter looms for most common cars and also most radio setups. I guess they are available online too. I would avoid chopping a factory loom unless there was no alternative. The biggest issue with the I10 is finding a cradle that doesn't look horrendous to mount the new stereo into

Thankyou. Ye I’ve looked and they all look worse than the original radio and don’t match my interior trim colour.

there is a kit on amazon and ebay that has a new hazard switch and also a double din hole for the stereo.

@@churchhouseclassics could you post the link to that product so that I could get that. Thanks

@@jordz121 try www.amazon.co.uk/CARAV-11-143-14-1-Double-Surround-Installation/dp/B07DNG691Z/ref=pd_sbs_107_1/257-6950239-4484412?_encoding=UTF8&pd_rd_i=B07DNG691Z&pd_rd_r=c812713f-66c3-443e-953d-18c393db463b&pd_rd_w=QZnQ1&pd_rd_wg=VeXtS&pf_rd_p=f4a31d1d-8f61-48f5-b6f4-a22ba06df575&pf_rd_r=XHF3RW1HAJJJR2Y193YH&psc=1&refRID=XHF3RW1HAJJJR2Y193YH there are other places, this is not a recommendation just one I found after 1 min of searching. good luck

If you are upgrading to android player for example, you need to buy another frame for it..and the slot for hazard switch is included along with the frame..

Sorry but I don't know which fuse it is

it is the radio fascia or radio mount

the main reason why I shared the information to try make it slightly easier 👍

sorry but my translation engine on google doesnt work with this. Can you translate to English and I can help?

Sorry I do not know that

I think it might be amazon or a quick google will find the source. I cannot remember sorry

Xtrons toolkit installation