No video :(

I Bought a $1000 YFZ 450 Race Quad (RISKY Purchase Pays Off)

Подписаться 463 тыс.

Просмотров 223 тыс.

50% 1

I buy a $1000 Yamaha YFZ450 quad and rebuild the whole thing. #Yamaha, #YFZ450, #Deal,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Опубликовано:

2 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 370

@badlyniceness2315 Год назад

The confidence we all wish we had…thanks,you make me feel more competent as I watch…nice work…a zen repair job!

@Yamaharider98 Год назад

Perfect timing! Just finished watching the video where you picked up the YFZ!

@DirtBike101 Год назад

😂

@shanewilliams8768 Год назад

Another good build. The only thing you need to change, is on any heads that specify to loosen and then retorque the bolts like that, you need to loosen and retorque them one at a time, and not loosen them all at once again. ideally in the exact same order that you torqued them the first time. The idea with that being that the other bolts are holding the basic torque spec, and keeping the head pinned down tight, as you loosen and reset the others more accurately than they were seating the dowels and squishing the gasket.

@Crosshatch1212 Год назад

Always learning bro , it never stops ,although this is one off the frst things I was told .All bolts go bck where they where and come out n in ,following a pattern ,

@CesarDRK Год назад

This is a like an encyclopedia on how to rebuild the yfz engine. Great work!

@reggiexp69 Год назад

for real. its good cause u see alot of them broken and cheap..

@RunGMCSyclone 11 месяцев назад

I just want to say this video is awesome, very in depth. Excellent source for a rebuild for people that are trying to learn and DIY. I didn't watch the entire thing, but will be subscribing and watching more. Truly an amazing build video.

@tdimccullough Год назад

I saw a guy who builds performance engine and he used an old dishwasher to clean crank cases using degreasing liquid instead of water . He Also used the heating element in washer to help clean dut also with the cases hot it made inserting bearings simple

@thebigguy8306 Год назад

Have seen that also, only a commercial dishwasher (Hobart) with big swing-away doors, worked nice for larger applications

@kayleythomas9937 Год назад

@@thebigguy8306 iv done it in a house dishwasher with water and dish tablets come out like new 😂😂 dry it off when its finshed

@randyelston7063 Год назад

Ive done it in the kitchen, my wife left me shortly after lol

@Crosshatch1212 Год назад

Yeagh , if rebuilding a motor I tent to clean casings ,even just for aesthetics ,look so much better .go look at my bandits , 😊

@Crosshatch1212 Год назад

Bhought from an auction ,

@dennislamers986 Год назад

Blows me away when I see all the gears when the motors apart. I'm amazed hoe you just rip it open and rebuild it. Good job sir.

@Oheeeoh Год назад

What an amazing reference video for someone who had to do this themselves. Thanks for the video and enjoy your weekend!

@_Brando_69 Год назад

That year of yfz had a recall if I remember correctly. They added a little oil squirter inside one of the cases. They would send you the squirter for free and you had to have a machine shop machine it and press it in

@matthewstuckey665 Год назад

Awesome video. Your work is precise Brother. I love watching what you do. Like I always say I hope one day I can tear down an engine like that and rebuild it. Great stuff guy 💪🏼

@jasonmilam9930 Год назад

U have more faith in the niche piston n rings than I do. Good job and good luck

@MM_in_Havasu Год назад

Nice work on this rig! Thanks for a cool and informative video, Joe! Now you can hopefully flip it and make some $$$.

@darrynruzicka2883 Год назад

You absolutely can use a hone on a nikasil cylinder. Just lick it with a diamond hone to deglaze If you are installing new rings so they will seal properly. For future reference obviously.

@thegrassassasin2142 Год назад

Too the extreme he rocks a wrench like a vandal.. Damn Joe buys all the good stuff for his channel !!!

@greathornedowl3644 Год назад

You are having way too much fun. Love the channel, keep up the hard work. You are meant for a higher purpose

@Nighthawk1966 Год назад

Awesome awesome job again on this one Joe ! And as as usual, I don’t believe there’s any machine you can’t conquer!

@XXXCRSPL 10 месяцев назад

That first start up sounded Amazing!! Great work!!

@mikeymiller4665 Год назад

Great job outher than I believe I saw you beating on the inner race of the bearing that's hard in them when a side load has been applied

@ralphvasso7209 Год назад

Heck of a job kid. Keep up the work. I hope someday to get a 450

@ricardovasquez4184 Год назад

Reminds me of the one I bought in the summer for $800 . Beautiful machine !!

@joemusicman64 Год назад

That thing sounds fantastic. Good job. You ended up doing OK on this one.

@rvhopper Год назад

I just love your channel! Very good education and you seem to be a very cool guy. Keep up your good work please! Thanks Man

@ezio8591 Год назад

Tusk makes great after market parts. I got their seat heater and hot grips on my ATV and they are great, keeps me warm. If you have to use your ATV in winter, do yourself a favour and get them

@68-72mmALKYstyle Год назад

I’ve found that putting the cases in the oven works AWESOME. Ur way looks to b successful so I guess either way is ok. To remove bearings the same thing and put em in the oven having the cases up side down and u will hear when the bearing falls out.

@mattasbury84 Год назад

Always place my cases in the oven and my bearings in the deep freezer for at least 2 days. Works every time!!!

@callmecardo916 Год назад

Pretty nice quad you got,liked the snow riding👍🏼👍🏼

@peteraitken6494 Год назад

Cracking quad joe for what you paid and put into it loved when you started it and was in gear lol glad you left that in the video pmsl sounds great mate awesome job 👍🔧🔧🔧👌

@darrynruzicka2883 Год назад

Use MAP gas with your torch for most applications. Much hotter and faster. It's in a yellow bottle.

@timoeland6159 Год назад

I've learned so much watching your videos! I have a 1984 Honda 650 Nighthawk, I wish you'd work on one of those sometime!

@trose7620 Год назад

Great job, man!! Sounds smooth.

@raykuhn2869 Год назад

Mate you sure know your business the way you work to make sure you do it right the first time out BLOODY TOP JOB WELL DONE AGAIN GRUMPY

@jefferybenavidez1478 Год назад

again I ask you don't you have a parts washer? especially for those carb's! saves lots of time and makes them look like new usually.

@RealworldtalkRWT Год назад

I am unsure how old you are but your knowledge about bikes and their workings is awesome. Wish I lived closer I’d pay you to teach me👍. Loves bikes but clueless and to old to go to tech school.

@AZVIDS Год назад

Satisfying rebuild Joe👍

@904C5ZOSIX Год назад

Wow! It turned out awesome! Love your vids! 😁😁

@robertwhitey6621 11 месяцев назад

I put the bearings in the freezer and heat on the case or housing seems to work pretty good.

@krisley5178 Год назад

Well done Sir. I don't think that thing makes even two full revolutions with the starter before it fires up. Very nice. I think I woulda slathered that entire swing-arm bolt in anti-seize tho, to give the next guy a fighting chance at getting it out.

@Claude-om9og Год назад

Also never hammer on the inner race of a bearing!

@mattdee9296 11 месяцев назад

Ya saw that too, definitely a big Nono

@GandolBro Год назад

Great video, where’s that trx700 at? Did you sell it? Wanting to see another video on it! Great content as always keep it up and stay warm.

@thebigguy8306 Год назад

BRAVO - great job, love the channel, the teaching moments are endless. You and my father would have worked great together, he loved to tinker and learn. Glad you are inside a heated garage, -15F this morning in St. Paul MN. This is typically when the car would break down, and you are replacing the starter or water pump in a parking lot or driveway on the frozen tundra

@mattasbury84 Год назад

I am currently restoring my 04 Mojave, but I never liked anything about the stock gear box with the reverse +5 gears. I recently discovered the Kawasaki KLR 250 has 6 gears and the engines are practically a direct swap!

@taylor_imaging Год назад

The best way to seat fresh rings is to heat them up at full throttle for three seconds then engine brake and let them cool for twice as long. Do this about three times and you're good to go.

@kianschmeling3893 Год назад

I am quite shuer it will run. Don't rory because you are a very good mechanic! 🙂

@gallejugon3350 Год назад

Lets get this thing warmed up First gear ... Luckly you dont rev it ... Good work as always.

@trose7620 Год назад

Nice Raptor, enjoy, be safe!

@Mud_Dragon Год назад

this is a prime yfz.year and all.nice find. love this bike

@2vintageDeamonFan Год назад

Great video as always

@vet8787 Год назад

Nice work ! Not sure if you have one ,but the motion pro auxiliary fuel tank is a great tool.With the amount of bikes you work on it would be a time saver for sure . Awesome videos !

@tonyrice2170 Год назад

Great video learned alot thx.

@cheto2952 Год назад

Idle is a tad high. Glad to see you finished it I watched the first video and I was like is that it until I seen it today great job man. Make a nice profit off of it.

@davidstephenson7194 Год назад

Using USPS property as a parts bin can get you in trouble with the Feds.....great video as usual !!

@chrisbenjamin417 Год назад

Awesome job!

@stacks1967 Год назад

Good Morning Joe, from Las Vegas!

@c0munguyforcaz Год назад

Wow 1000 Dollars! What a deal!

@billyfpv2777 9 месяцев назад

I would sale it fast the first and 2nd gens was notorious for overheating lol A friend of mine that owned a local shop bought and owned 4 own them spent thousands on them getting motorwork for gncc racing. Couldnt make it half a lap on them without overheating. I dont htink they fixed the overheating issues till 2014. Good video though and always like watching you do builds.

@graemewilson5459 Год назад

I love your work and whistle while you work. The Misses must have promised you a nice surprise late on 😜

@chrismacomber9727 Год назад

Really cool video.. do you use a certain sight to get all the specs for all the different machines you work on??

@robcates2383 Год назад

Great job Joe, love your videos, what happened to the XL 500, have you sold it already????

@dubiousf00d Год назад

Really turned into a nice atv. Hopefully we get some dirt footage of it.

@jmendo2546 Год назад

This is one of your best video's Full rebuild of an engine :)😊in detail. I was waiting for one Great job. You have come along way.

@LewisMowersandBoats Год назад

Great job brother 👏

@ragnarironspear1791 Год назад

Awesome channel really enjoy your videos

@Bafcrawler Год назад

Dudes living the dream 🤙🏻

@chasejones4946 Год назад

Hell yeah keep up the good work, I’ve been watching since you used till live at yours moms with Charlie

@countryboy4life969 Год назад

Good job and good purchase

@troyrosenbaugh9935 Год назад

Torch tip cleaners/ files for carb jets. That's a dirty sucker. It should clean up new again, and it's pretty easy!

@frankwilliams2198 Год назад

I thought I heard the yzf getting ready to start when you quick grinding on it.

@RATADATUAVELHA Год назад

love your work man, and your knowledge transfer 💪

@gpmotostallermisiones579 Год назад

Muy buenos videos y trabajos! Saludos desde Argentina!!!

@johnbest4320 Год назад

Great rebuild Joe love your attention to detail alot over look things like lubricating everything put oil on the fuel pump greasing the gaskets so they don't stick & generally lubricating the gears you torque everything the way it should be done and this is where alot go wrong with rebuilds the quad sounds beautiful it revs right out and has plenty of power in better dryer condition on the land this quad will be a boat load of fun & 1500 bucks all in plus time is a good deal I just really enjoy & look forward to your videos the genuinely are so fun & interesting to watch Have a great weekend mate take care 👊💨

@bobhyde4793 Год назад

would you tell me why the case halves needed to be piulled together please? What component(s) had the interference fit?

@zodzod9378 Год назад

Good job so satisfying after engine re build did i forget something ? lol Little john from the UK

@robertcraft8945 Год назад

Great job, i cant say enough about yiur work! hoosier wing🌟💫💫🇺🇸👍🏻

@phonomenon Год назад

every time I watch one of joes bike video, I go pick up one. I started right around the time you did and now fb marketplace is just saturated with flippers lol.

@snowyowl7042 Год назад

👏Congratulations, looked like a pile of parts.

@bradley7723 10 месяцев назад

Sounds if the fuel screw was turned in all the way they had to large of a pilot jet in it. 1 turn out min. Over 3 out and the pilot is to small. As for nikacell Tusk tools make a stiff nylon brush that's like a ball hone but only cleans and will not remove any of the coating.

@edwardestes8038 Год назад

Bravo sir.....job well done...!!

@UltraGMC Год назад

Good job other then the gaskets the paper tusk are known to fail.

@mattmartin8293 Год назад

Hey awesome quad what compression is it and can you just run premium or race gas ⛽️ ??👍👍

@stevenmillar8810 Год назад

like that you left the part were you started in gear but do you not have to hold the clutch to engage the starter

@jarredc4895 Год назад

I want to know where he finds deals like this. You can't find basket cases near me for less than 2 - 3 grand. It's always the "I know what I've got" situation.

@Tuppi1290 4 месяца назад

You must have very understanding neighbours, sounds awesome

@billmoore7133 Год назад

I've bought 2 YFZ450's in the last 3 years one an 05 in Reno for $1500 tune up oil change put in a battery runs like new taken a couple dune trips, then an 08 in New Mexico for $1100 same story a new battery. both in amazingly good condition all original plastics and stock decals. Lately its been much harder to find for these deals. I did drive 890 miles for the 05 and 1460 miles to Albuquerque. 3 or 4 years ago they were all over for $1000 to $2000 not any more. I did also do the oil mod to the 05 the 08 doesn't need it, but that was my choice its not required, but I didn't want to risk it,

@ni_wink84 Год назад

1: parts washer, ultrasonic, anything to clean off old mess, can literally heat grime in threads when reassembled, there’s a reason engine builders have a “clean room” 2: use an oven to heat the cases evenly, good way to warp the aluminum like crazy using a torch 3: get a good set of actual micrometers instead of calipers Great job but if this was a decent car engine.. it wouldn’t last very long lucky clearances in dirt bike ATV stuff isn’t as critical 4: RTV is trash, try yamabond, or another type of thin gasket glue

@outdoorfunwithb Год назад

Awesome rebuild i always enjoy all ur rebuilds been watching u for a min. Now keep it up 👍

@Smalltechguy Год назад

Was the Vinnie under the snowdog in the front yard...LOL

@shaunsmuder1637 Год назад

I've been watching this channel for Quite a while don't think I've commented too much haven't really had the need to but I will say that the grease on the gasket trick was well worth saying thanks for the tip.

@waffalobill Год назад

Really like this one. Would love to have it.

@edpartyka1581 Год назад

Hey 2 Vintage, I got a problem on my hand right now! I have a 2007 Crf450R that I bought that had no spark! I drained the stator side oil to replace the stator and never filled it back up with oil because I wanted to see if I had a spark before filling it back up with oil! I let the bike sit in my garage for another 1 week after draining the oil and yesterday I went to kick over the bike and it didn’t kick over! It just locked up and I got no clue why? The bike was never started and stood in the cold for a week and did not crank over! I’ve watched all your videos and seen you fix all your bikes not mattering on the problem! Could you please help me out and let me know if you know what the problem is! Thanks again!

@charlesgrosset4518 Год назад

Keep up the solid work

@bryceriehl6767 Год назад

Love the vids

@TroySmith-cz5jy 2 месяца назад

Have you considered a lift table? They are pretty user friendly.

8 месяцев назад

Hope you kept this one nice bike

@jayjudd6518 Год назад

That was very helpful I enjoyed this video. Lots to remember not sure I could put it together since you find mistakes all the time when you do tear downs.

@ryanmaloney5503 Год назад

Let’s go 🇮🇪

@TheKerb10videosandpictures Год назад

Man, I, in my 60, would like to do something like that. Looks so easy, LoL

@nicholasprice8196 Год назад

My absolute dream quad

@belob4050 Год назад

yo you acutally repair my dream quad nice vid

@belob4050 Год назад

@text-4027 Im so exctied broo

@jasongodin7165 Месяц назад

mark on piston always goes to intake, why do you set your rings like that, compression's go up to exhaust on 45degress and oils bottom about 35degrees

@troyrosenbaugh9935 Год назад

328 is not a ton of hours unless they are high revving hard beaten hours. Those bikes are tough as nails. I ❤️ my raptors! My 660r is a 686 stroker now and nasty as hell. My boys 450 is big bored to 510. Very flexible bikes. Great job!