I BOUGHT A NEW EXCAVATOR. SANY SY95. TIME TO PUT IT TO WORK 

I just rented a sy75 and worked with it for 3 days and the fuel gauge was only half way down, they are very economical, I was really impressed

I have a 2017 Sany SY75c I have put over 700 hrs on it with no issues. And you can't beat the warranty and price. Hope the machine does you well my friend.

You probably already know this but the weight of the machine listed on the name plate is for the machine itself, it does not include the weight of the quick coupler, bucket(s) or thumb (+thumb cylinder & hydraulic lines), as those things are not permanent and may change depending on how you set it up for any given job. And I think you had 2 buckets there when you picked up the machine. There is a good bit of weight in those components for sure. Enjoyed the video.

I recently picked up a Sany SY60 and love it so far. The price and warranty are hard to beat. My cab is very similar to that one and the cup holder is a terrible placement.

Looks like a great machine. I look forward to seeing more videos

I just got put into a Sany 215 for the next 6 months. Not a bad machine so far, it has 1,800 hours and still has 3 years on the warranty. The drives are a bit jerky, and the hydraulics aren't the smoothest, but pulling power and bucket breakout are good. Weak for pushing. The engine is a Cummins 6.7L and the pumps are made by Kawasaki. Honestly, quality seems very good. Time will tell though.

Hey quick tech tip 😉 you can screw the joystick a part and turn the little plate with the two buttons and the thumb wheel 90 degrees. Cat had used the same joysticks thats an easy thing. And the blue protections on the cylinders are the shipping protection I wouldn't use them while working. Dust can come into this protection and can damage the cylinderrod and the seals.

Was stuck in traffic this week behind a plumbing contractor hauling his new Sany. Got a long, good look at it and it sure looked nice. Almost like a baby Volvo. Meant to call the guy and ask him about it but hey, your video is even better. Congrats!

Great video mate. Thanks a lot for your business and trust in TIDAL and SANY Canada. Steve is a great guy to work with! My name is Suman Mukherjee and I head SANY Canada. If you are okay I would love to catch up with you and the Tidal team when I am in Halifax next!

Those SY95's weigh between 20k and 22k, and you can use the steps on the side of the track carriage to chain it down. The welds are strong enough. My husband hauls Sany's often for work

Congrats on the new machine! Cant wait to see a video on which air bags you went with and the new chipper!

That new machine is quiet. Appreciated the short in-cab demo of the Sany. Amazing how much power and capability it has. Was expecting a video only on the F450 and you’ve taken the time to show the Sany - that’s cool! Love these machines. At 21:30 you pulled that stump out easily. You must have ICIS in your GoPro - but the tractor seems smooth - not tossing you around in cab - image is steady. Keep making the excavator vids.

Seems like they’ve really stepped it up in the quality with those machines, 👍

I own Link Belt excavators they’re made In Japan I’ve had no problems with them I wish you best of luck with your purchase .

Congrats on the new machine, looks like it will do well.

Wow that’s one sick machine ! I could readily use that for my lot cleaning 🪵🪵 Great video thanks🇨🇦

Congratulations on the new machine.. I've got the kubota u17 and the kx057-4.. But of luck...

Thanks for the great video! 👍 I’m gonna be getting my sanny sy26u soon.

Good to see that someone use the chainsaw first, to take down trees, and not rubbing the wood in the dirt before pile it up!!.. Good video of the machine,, almost want one now..

Sweet madhine. One thing you should modify is a battery cover with vent tube off and away from being pulled in to coolers and radiators. The acid fumes will eat up the coolers and radiators..... This isn't common issue on lots of machines where the batteries are placed on this position

Congratulations on your new piece of equipment! Get ‘er done 👍🏼

Awesome New Machine, You will definitely get use to it.

Nice toy, now don't scratch it up against the trailer or truck! See Bauer got you jealous for a yellow machine in less than a year. If you're not used to playing with four thumbs, try playing with no toes instead. Stay safe and bug free (mosquito bites).

nice machine - I've had my share of brands and will give SANY a good look at for my next purchase

Ok, so I watched some of your other videos. Sure wish you would have stuck with Kubota as Japan is an ally. Noticed you are Canadian. I just bought a Wallenstein log winch. Made in Canada. Love it. For what its worth I just bought a CAT 304. Did prior research. Even called Caterpillar. My machine was made in Athens GA and the CAT engine was made in Texas. Do a RU-vid Search and you will see the Athens Cat plant with Americans at work. I don't have a problem Japan politically or with Kubota who makes excellent products.

I saw your truck out in the yard. Congrats on the SANY and thanks for the business at TIDAL. If Steve hasn't seen this video, I'll forward it off to him.

You can take the handle apart and turn you thumb toggle 90 degrees so it side to side

Sweet machine! A buddy of mine just bought a sany 80 u he wanted the 95 but wanted the boom to swing. 95 looks like a beast.

I'm going to really try and get me one of these whenever I can get my dump truck paid off With the wife's permission of course

I have never ran a Sany. I would love to try that.

Looks way bigger than my 080. Congrats and can’t wait for a mulching video👍🏻👍🏻👍🏻🇺🇸

Wow.... nice machine... amazing how much it can get accomplished...good luck on all your projects.

Very informative video Basically same conversation we been having about cat kubota and so on Makes a guy wonder about long term But overall seems like a good deal

I demoed one of those, that delay in the thumb drove me crazy and then when you let go of the toggle it still moves a little bit, other than that it was a pretty good machine

People hate on sany because they spent double on a different machine and it would de value their equipment if people started buying them

I love yanmar engines. They are the best and economical with fuel!

Hey bud, Congratulations on your purchase, Looks like a great addition.

Looks to me like that insert for the thumb control is square. You may be able to clock it 90 degrees and have the same thing as Kubota

Put CAT decals on it.

the kubota is an 18K lb machine and this is 2K lbs heavier, different class, tough to compare

Nice channel. I bought the SY35U. Love the machine. Funny thing my thumb control is horizontal

Hey amigo congrat on the new machine....growing and expanding the business good going...that f450 is helping .. Saludos...

Mantapppp exsapator sany iklan nya kuat kayak nya

nice vid..nice unit...those i believe can be tuned up to around 100hp maybe more...there tuned down by factory to 72 or 74 hp to get around DEF laws :)

nice rig bud.... yeaaa about the cup holder thingy is because of the eleytic-gauges concol ...is why i beileve ...lol there are guys out there are SOOO CLUMPYSSS may spill water/coffee n or tea

If You take the lever apart,2 or 3 screws, You can rotate the switched so You get the toggle switch horisontal!

Just stumbled onto this vid.it would be nice to see some of the internals of this machine.Lets see the pump and valves brands on this machine.Id love to see if they are using generic parts from name brand companies,that would really help with the sales to me.Im looking at 8 ton machines now.SANY put out a hell of a good factory video,its worth watching them build these.Its on youtube.

Killing it man congratulations 👏🙌

I’d rather have tail swing and like you say have ample room to work on the machine. I like the Sany probably more power then the kubota

kubota and sany the anti thft protected every thing locked with a key

Looking at at cat 305 $115k 3 plus months lead time, vrs Sany 60 for $74k and it has more power more capacity. Bobcat e50 is $90k and is smaller than the Sany plus Sany warrantee is the best. I can buy the Sany and put on a tilt rotator for less than I can get a Cat. May give up resale value.. otherwise it's another brainier.

Solid choice

Like the machine, been looking at them myself for the same thing you are using yours for. have you thought about getting a rake or ripper for grubbin' the stumps? Good stuff I just found your channel.

Nice!! Looks like a great machine and manufacturer... :-)

U should put blade down when digging would stop most of that tipping

Man been missing the videos sweet machine tho crongratz

Good looking machine I'm torn between the yanmar sv100 and this sany

new sub, love watching creators from the homeland

Ya it has power and it pull machine over.

Control sticks need to be straightened to avoid getting banged against knees when foot pedaling in reverse

Am in love with your life style 💘

How much for EXCAVATOR SY95?

there might be adjustments on the foot pedals for positioning

Congrats!!

Nice i was really hoping this is what you were getting there is so many of them coming into Nova Scotia now it seems

We shall see how long it lasts , its not built like Kubota but it costs a lot less .

What are the real advantages of the 95 over the 80. I see the 80 is zero tail swing, and weighs a little less. But their power and reach are almost identical.

We got a sany excavator but only repairs after repairs hydrulic system no good. Wait until 200 to 500hours

Nice machine brother

There's something about that new minas on ramp where people seem to lose all common sense. I don't think they realize how short it is and they get all flustered.

I have a 22 95. How are you liking the machine? And what trailer are you hauling her with? Thanks

So what about the dipstick behind the boom. Whats that for?

Love to see the mulcher at work. Does that have stick steer?

I’m in enfield Looking at the same machine from the dealer in Truro

Wondering why you don't push the trees rather have a tree guy come out and cut? I've dropped many in my 080 and the Sany deff looks heavier and the steel tracks push better than rubber

Cabin climate control is often a weak point with some new machines. you were operating it with the door open... is Bad cabin pressure and AC the reason?

where i can bye the excavator Sany SY95C ? i want bye and send me to French Polynesia

what size bucket do you use on your sy95c? especially when digging stumps, do you recommend anything above a 24" thanks

I am interested (I work for Caterpillar), what made you choose the Sany vs. any of the other competition. Excavators are a very competitive market, so lots of options. Thanks!

I have thought of buying one of the Sany 50 or 80 models. What has stopped me is how slow the tracking is. At least 4 years ago the tracking was slow. Have they improved the tracking or put in a 2 speed tracking so that it has a fast mode?

Cost of ownership make up the difference? I just bought a hitachi 230.

Love ur channel..I was seriously looking at a sany sy75 or 80...I just read a comment on another channel that the sany boom was very jerky and no power.. Did you find that when you operated yours? Ill welcome any other comments to

Sweet!

What is the blue clothes on you're cylinders?

Got a great price on a left over 😊👍🏻u still loving your 95?

Do your superduty’s feel light in the steering? Especially when towing heavy loads? I just got a 2021 F250 and was surprised how the steering seems to wander on the highway.

I think sany machines are garbage but congrats on your new machine

Sany excavators and heavy equipment are Volvo's little brother ,they are made in the same huge complex in South Korea but to a budget .

Congrats whats she going to be pushing for hydraulics gallons per min compared to the 80 comparable with mulcher head on?

How well have they honored their warranty? We run Cat now. Was quoted $88k for a 303, and $45k for the sany. We do a lot of city work and are terrified of the sany breaking down and being stuck, but like you said, that’s a lot of difference in price.

You paid $45,000?? Do they have any more?

Nice job. Was wondering what kind of price you put on a job like this in NS? Do you price it by the hour or job? I live in another province just curious how it compares over there.

the thumb seems very responsive too

Sorry man, but maybe you know we have entered the final stages of an economic war. My family escaped communism and I wish you didn't buy and support communist slavery, I know deep down you thought about it, we all do, the carrot of warranty and price are built on slavery. My Dad worked in Soviet Slave factories, my God I wish I could help you understand. Man, I have kids and sweat my bills too, but I have to fight back and give my kids a future. I live in CA and do the same kinds of work, this damn state is practically communist and eating men like me alive. I love the channel and I just can't not ask you to give an honest comment about what we face.

Do you know what is the lifting capacity of that machine??

Nice looking machine you got there ,what motor does your 450 have in it ? Excavation channel and new subscriber here 😎👍

I’ve got Cat excavators. But, they are common, large machines. When it comes to smaller machines, I’m not above an IHI/Kato, Takeuchi, or Yanmar. I’d even be willing to scope this brand out of I can see a long term parts promise. I live in Georgia. If these are made here....it could be an advantage for me. But, I’ve heard lots of bad things about this brand. But that could just be armchair warrior propaganda also. I think Yanmar is also in Georgia. iHi has been a robust Japanese machine. You have to get machine parts from Kentucky but I’ve heard you can get every piece in a day or two. I’ve heard the IHi Kato dealer in Kentucky is super nice and friendly. Japan excavators are most all good. So, this brand intrigues me being from China. Or, the parts. If I was to buy this brand new.....I’d have to have a promise of a recall or updated fix for the delay in thumb hydraulic speed issue. No way I’d put up with that long term on a brand new machine without a factory update. Also, it is impressive in the price difference between this and Cat. The price gap would pay for a roto-tilt system on the end of the stick. Now that would be slick! Anyone ever see a Sany with an Engcon system on it??????

I would go cat all the way every day

Hey bud just wondering how you got started with getting those kinds of jobs ? Any info I'd really appreciate.

looks like its built similar to the new Hyundai excavators