I Bought Dual Motor Standing Desk | Ergologic Sit Stand Desk Review 

I agree the seller is really helpful. Hope you've liked the video. Don't forget to subscribe. Thank you.

Can u share their number please?

You're very welcome. If you're planning to buy it then you can use my affiliate link. 😊

​@@happytechtipsSure bro, With the top wood is best or Only Frame is cheaper, How much is your top wooden cost ?

@@shivashelva_ If you want to save some money then you should go for only the frame and you can buy the tabletop from the local market. My tabletop cost me around 2500 including sunmica on one side and that is for the largest it can support, 6ft x 2.5ft. So I saved around 5k+. This size tabletop isn't available and the one you can from this brand is I believe around 35k.

The one I have bought goes as low as 26 inches or 66MM. That's quite low and you can easily add castor wheels if you want. If you're planning to buy this one then you can use my link in the description. Hope this helps. Thank you.

@@happytechtips that was very helpful, thank you so much 💐

I bought that from a local plywood store. Go to a local store and tell them the top size you want. They'll probably tell you to buy the whole board since they don't sell according to your size. They'll be able to apply the sunmica of your choice for extra cost. For me it was 2450+150 for transport. I bought .75mm ply. Hope that helps. If you want to buy the frame you can use my link. Thank you.

It does have anti-collision feature, but it works when the force is a bit high. I have a chest of drawers which I put under this table. So whenever someone new uses it they hit that drawer and it stops. However, I've set up the memory height a little bit higher than that which makes sure it doesn't happen. You can use my link if you're planning to buy. Hopefully I've answered your question.

I understand the confusion. I was also confused at first which one to buy and finally settled with Ergologic. 1. Warranty isn't something that we could rely on for these small companies because it's 100% on them to honor it that's why I checked the cost of each part beforehand. All of the said brands are getting the parts probably from only one dealer in India which I think is TiMotion. Just google TiMotion. 2. The brand comes down to your budget and your needs. I chose Ergologic specifically because I only needed the frame and they were the most cheapest with 5 year warranty. The whole table including the frame, plywood and finishing cost me 30000. I put the largest table top that it supports. Now if you were to buy the table with table top you won't find that size and if you did the cost would be exorbitant compared to buying the table top yourself. Others are selling the same frame at a higher price. 3. If you're looking to buy the table with tabletop then I would suggest you go with Monarch Ergo. Here are two reasons why, a. It's close to your home and has a 10 year warranty. b. You're local to them and you'll have an added advantage to negotiate the price a little if they're willing to. 4. In conclusion buying from a local vendor is always better than buying from Internet because it makes it easier for you to claim the warranty and save money a little bit. The after warranty parts would cost more or less the same, the bosch motor can be a little bit expensive. If it's your DIY project then only buy the frame and drip the screws in any oil before you start screwing the table top with hand. This will make it very very easier to screw the tabletop without electric tools. And if you're going to buy from Amazon don't forget to use my link and hit that subscribe button. :) I hope I've answered all your questions. Best of luck for your project. Thank you.

It doesn't wobble even at the max height. I've got 2 monitors one is 32" and the other is 24". The table is very sturdy unless you intentionally wobble it.

The display is blue and very small. It just shows the error codes and table height.

A little bit wobbling when you are using the desk in standing position and type really fast or too much hand movement. If you're playing games, then no wobble. But I've got two monitors and 5.5 feet tabletop so if you use smaller tabletop then you shouldn't have any wobbling problem. You can see my desk in my most recent video. If you're planning to buy don't forget to use my link .Thank you.

Thanks ji, for your inputs, I will also will have two monitors, but slight wobbling is fine. I feel when compared to other brands, this is very reasonable price. Where did you buy the table top ?, you made by yourself ? is it a plywood or engineered wood?

It does not. It depends on the table top quality and screen you're using. If you're using dual monitors and have a 6x2.5 tabletop then of course it'll wobble a little bit when typing hard. But if you've got the tabletop smaller than that then it won't be an issue. Thank you and if you're planning to buy don't forget to use my link.

@@happytechtips Thanks a lot. I am planning for a 5 feet wide table top max.

@@pchoudhary Good luck with your adventure. I would suggest that you buy the table top from local market and just buy the frame. You'll save at least 3-4k.

🙌🏾🙌🏾🙌🏾