I Bought SKETCHY Airsoft Guns! 

On the last shotgun there is a a lever beside the trigger guard you have to depress to operate the slide when it's not cocked it is just like a real Remington 870

Bros showing up with half broken Airsoft guns to the field 😂

I like the Beretta. Who needs accuracy when you can yank that out and have it go brrrr?

Great way for them to make money by selling absolute junk

I stopped playing airsoft 15 years ago, but I love watching your videos because I see a lot of new guns. I mainly had (old) Tokyo Marui weapons. The weapons seen in today's video were not in the best condition, but I would just hang them on the wall of my room as a decoration. Of course, as a non-active player I don't have big demands :D I wish you more success and good games!

Cartridges !!!! 😂

With that fried classic army rifle, you could set up a button between the battery and the contact. Then set it up on a pole and use it as a turret

the repeated "i wonder whats wrong with this guy" has gotta be what my therapist think everytime i show up

The way he says cartridges drives me crazy

the fact that you ended up with two of the same pistol with differant issues on each of them you could easily scrap the second pull the barrel and make one working galaxy

'Woooah, alright, not too shabby!' thats my favorite line

THE SWITCH ON THE SHOTGUN WAS ON THE SIDE

4:45, yes, it is an adjustable screw for the trigger to reduce over travel. Pretty standard for the Tactical Version of the USP. PS. And the Navy P226 just needs a new trigger return spring. Fairy simple to replace. 😉

for the next vid you should rebuild some of these guns

"Total loss" just doesn't try the actual side charging handle😂

1:29 well it could be that or the spring has become unattached. only best way to say is to take it apart. just bc something is not functioning it wont mean its completely unfixable

Love your videos. Every time you post it makes my day because I would kill to be able to do airsoft more but I can’t afford so I love seeing you unbox them.

These would make interesting additions to a post-apocolyptic mil-sim type of event, like SwampSniper's. So you could buy or trade off "vendors" or they could be rewards from someone. Their functionality could vary from unusable to cosmetic damage only. So you could also use it as bartering materials. The trade off being you'd be able to keep the gun after the event, in the case if you wanted to buy the parts to make it functional.

i own that same chronograpf, youre supposed to keep gas guns about 10cm away so the gas coming out doesnt affect the results.

I got one of those cyma shotties that were "broken" Same problem with yours, all I did was pump it really hard to release something inside the gun, and voila, it worked again. 0 issues, shoots as it should be. They have a common problem of being too stiff that the insides rub together a lot, causing it to "jam"

my man has apparently never heard about glue

Love that austringer. It, like eyasluna, are actually related to hawk moon. eyasluna being younghawk moon and austringer being baby hawkmoon

5 seconds in, austringer spotted. Subbed.

Ooooooh I really like these ones had me rolling lol

It is funny to see the Made in Newington NH stamp on the SIG replicas... I just moved away from the NH seacoast. We had SIG Sauer in Epping NH and Newington (each about 30 minutes from eachother... it is just funny to see these details.

The point of that little thing on the back of the trigger is to prevent over pull. You would set it at the exact break point of your gun so you can reset and fire faster. Pretty cool

Love you vids

That revolver's cylinder crane arm can easily be replaced. Its parts are cloned from a real one and you can get those rather easily. If buying one isn't something you want to do, you could either mend it back together or print one.

Lets go keep it up. You know its a good day when wag makes a vid

You can get springs custom made to literally any spec you want, so if you can just find out the type of spring is broken in your gun, and custom order one to the same size, weight, and tension from a spring making company. It shouldn't cost more than $30 at most. You don't need one from the airsoft gun company, they just get them from spring making companies anyways.

For the CONTENT BABY!

Wag whenever the gun works “ayyye”

1:49 not him casually flipping us off

good to see you again mate

You should've brought a professional to diagnose what's wrong with the guns. Would've been more accurate than just guessing what's wrong with it

What a good video wag. First time watcher. Not the last time. It's a good video that deals with issued that many of us deal with. Every BB gun I've ever owned is now broken (other than one 20 year old, none two toned pistol that the popo actually took from me) so this hits close to home.

LET'S GOOOOO, HE IS BACK

I have the Sig M18 but the only difference is the slide and guide rail are longer. Both work the same though. On the M17, the hop up is changed by rotating the guide rail when the slide is locked back. You can also remove the slide by rotating the frontward lever in front of trigger guard on the side of the frame when the slide is in the locked position. One you release the slide forward (HOLDING IT so it doesn't fly off!!!), you can rotate the gear connected to it to change the HOP or compress the guide rail out and rescrew it to its state where closed fully so it sits flush with the front of the slide under the barrel. You can then remove the barrel assembly and work on the gun further if needed. I don't know if this will help anyone but there you go.

For that last we tech galaxy, all you need is a new nozzle spring for the nozzle :). Love the vid

I’d totally dig buying one of these boxes and fixing the contents up like some kind of “project gun” type deal

That’s a fun watch . I guess you never know what kind of condition you’ll get

I love his videos and like telling us to do or not to do,he always had good guns fr be honest,and had a good colour scheme.

Question:is there a lmg airsoft gun if there is maybe do cheap vs expensive lmg airsoft that would be insane fr

That broken kar98 gives you future content at least a rehab video lol

9:31 The trigger works like that because just like its real counterpart it has a single-double action hammer so in order to receive the trigger there is a button over the mag release which you press down

I get a little smile on my face everytime you say Karkages, my dad used to say it the same way.

17:16 they put it in a box to protect the rear sight they have that on the M16s too

he finally has a new yard lol

the 2nd galaxy problem is the extractor u can buy from ctm. or change the spring ato a stronger one to just nulify the use of the extractor

The Cyma ones is maybe an easy fix just the part is hard to find but maybe can be repaired it is not the spring but rather the pump not fully seated maybe a bb was stuck in it

I think that the shotgun is fine you just got to pull the trigger then it will let you cock the action back. That is how most shotguns work but I don’t know if airsoft shotguns might be different but try that.

The final shotgun is an easy fix bud, my mates was a bonyard the same issue. Left racked so the internal spring was compressed and just needed a stretch to push the latch, no cost at all just a spring stretch.

The last shotgun could have a lever by the trigger or try the charging handle in the bolt. And the trigger is supposed to be like that it only resets after the slide moves

As someone who's purchased 2 different P226s (one from KJW and one from WE Tech), it's supposed to be dual action instead of single action, so that might be contributing to the trigger issue

i dont even play airsodt, nor do i ever (maybe) want to but i watched this entire thing and i loved it lol

I LOVE these boxes! :)

bro should do more of this this is literally a gamble

Woah cool a airsoft pistol with jamming functions super immersive

The austringer in the back goes crazy

honestly as someone who uses these as fiddle toys id have a field day with these boxes

i love the we galaxy i got mine to work at 25rounds persecond the reason why the gun was like that is due to the hammer spring its not hitting hard enough to knock enough air to cause the blow back. the double shooting is the same reason your hammer did not lock back far enough because not enough air was pushing it. small fix that will cost about how much ever is a cowcow 200% hammer spring would cost the cap u can ljust 3d print one no problem. u dont need the hop up upgrade unless u want to change nubs etch

I like the part where he said, "This guy"

A video fixing all of them would be really cool!

What was the type of mag you used with the USP Match? Would be cool if it was a cheaper one then what goes with it as long as it works.

Love that titanfall helmet in the background did you get it from cyber craft? I got a pulse blade pilot helmet from there along with a NCR riot gear helmet

Love you man you make my day

I'm torn on this. If these were pure AEG boneyard boxes it'd be kinda cool because there's enough aftermarket and compatible parts for pretty much anything that given enough time and effort you could probably make use or fix almost anything. But with springers and GBB stuff, there either is straight up no aftermarket parts because they use proprietary ones (far less TM spec compliant ones) or they are only available from the supplier directly, and some are charging insane prices or insane shipping. As is, these boxes are a lazy as hell effort to literally sell scrap.

The last shotgun you messed with looks to be able to switch between pump and semi automatic. I haven't messed with a airsoft shotgun before so idk.

@Wag Entertainment You should totally review the Umarex HK 416! I love mine, maybe you'd also find something really cool!

3:37 that is the exact same thing as my one is doing

That shotgun is good for me, my mom won’t stop talking about how dangerous BB guns are, so I need non firing weapons to play with

That Austringer though 😎

Love these videos That tactical force gun sounds like a hpa gun but without the hpa

I saw the Pulseblade pilot helmet on the top left shelf and I already know that you like Titanfall 2 just by that

Airsoft berettas with full auto capability usually jam in full auto. It's a common problem amongst all of them regardless of brand. WE, Rossi and Umarex.

Love your videos

that full auto pistol lol

The shotgun is 100% fixable. You can get springs that are down to the micro accuracy from various places. You can even make your own with the spring calculator that spits out a mandrel size for you to make your own out of spring wire.

It is possible that the p226 is supposed to do that with the trigger. I don't know much about p226s, but glocks do that on purpose

if i got "junkyard" sales like that, i would jumping for happiness as most of my own airsoft are "junkyard" but the price is almost full retail price out there

My Proforce 226 had that same issue lol

That Beretta M92A1 is so damn cool. I got one in 4.5mm airgun. I just love it.

The last one from box 3 is basicly now a turret gun😂

A misteraous spring 😂😂

Bro didn't even acknowledge that he hit 1 million

bro got the airsoft switch on the baretta 14:00 😂

I would love the none firing ones! Would be perfect for films

im only here for the G3 gun, i used to shoot one real one in the army Portugal, great machine, it shoot under water

The Beretta wit a switch is diabolical 😅

I can fix that green shotgun for you. I fixed plenty you just have to open it up in the center with the push pins then move the a piece of metal on the slide

i can guess what happened to that airsoft wingun revolver for SURE. the guy who bought it def slammed it close one handed like you see in the movie one too many times and broke the bit off

You could def 3d print an outter barrel for the pistol

bro...that shotgun...at the end...its not that kinda shotgun, it ejects from the side and thats where you rack the round...holy shit.

You should do “testing 1 2 3 4 and 5 star air soft guns”

Those shotguns can cycle from semi to pump because they are m3’s cycle the little switch at the front of the pump

Bro 3rd gun look likes the gmod pistol

I'd buy the Beretta for close to 190. That isn't broken, it's fixed. It'd be my backup if I run out of mags on my main, and for CQB.

thatn last shot gun is the same exact one i won from you a few months ago , and mine hits hard

Nozzle return spring is all that probably needs to be replaced on the second galaxy, could be 4 bucks versus nearly 40

Bro, Nylon hammer. Smack the charging handle. It's almost like you've never had to mortar a round out of a real firearm Lmao