I bought the 5 most EXPENSIVE woodworking tools on Banggood! 

I bough every woodworking ad I saw on Facebook ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZzvYeFoqyYA.html

You used the first item the wrong way , both of them should be used on the fence ‘check the arrow direction’ 👍🏼👍🏼

The small flip stops for the rods of the 'drill press' are meant to be installed the other way, so their block rides on the surface and the flip stop is on the outside. You can set both on at two different distances so you can drill one hole, at the first, closer stop, flip the swing up, slide the press over and drill using the second stop. So you can reproduce that pairing distance again and again on multiple boards.

Nice selection of items and I like that you mention pros/cons of alternative brands, thanks for sharing

Loving this series of buying and trying things. Helps me to see what to get and whats out there, thanks

the "roller things" work VERY well on the table saw. you install them both on the top of the fence. jessem calls them "stock guides". 10/10 product would definitely recommend.

Hey David, that saw track is made for a stone cutting or metal cutting saw. Shouldn't have been in the woodworking section. Love this series and the podcast. ✌️

One of the most cleaver, smart, creative an original videos I have seen so far on all these years on youtube, besides it is very illustrative, useful and saves u a lot of money , for me, a total winner video creator

But what if the chainsaw is driven by a drill? Surely that counts, right? 😂😂

Enjoyed watching this David, thank you for posting these kinds of videos.

On your recommendation I purchased the mitre Guage from Banggood. It arrived within 8 days to UK. I must say that you did not over-sell it when you reviewed it. I am delighted with the quality. Yes there are bells and whistles on market leading gauges but for the price I say it can't be beaten. I too recommend the Guage. The only query I have about the transaction is that I accessed Banggood using a browser. When I put the item into my basket I was prompted to complete using the app. So I installed it and continued to checkout. The price of the item went from £79 to £118! I uninstalled the app and completed the purchase for £79. I am not sure what was going on but it is worth watching out for it. The app did flash up a discount voucher, so whether that would have reduced the price back to £79 I can't say. Love the channel. Thank you for the help. 🌟

Great video! Was very interesting to see what you got and open up a bit on different brand options. Thank you!

Another great video ! Thanks for all the content over the years!

You can replace those black plastic on the front of the miter gauge. You can replace the running tract, so that means you can make the tract any length you want

I have had the same mitre gauge for about 8 months and it is a real gem, especially for the price. Super high quality and dead accurate.

Terrific video David! I really liked that router lift and may purchase one. I like that you give your honest impression & opinions without sugar coating anything along the way! Well done! 👍👍

I think for the vertical drill guide you're supposed to mount the little stops the other way around so the flat part rests on your material and keeps it level. Then the flip will probably be easier to ... erm, flip. It's not THAT much better and will only make a difference if the un-stopped hole you need to drill is further away from the edge, but it's not AS bad a design as it might appear.

I have bought lots of Banggood tools, and never been disappointed. The quality is pretty good and they get the job done pretty well. They used to do an even better quality mitre gauge which I purchased along with the box joint jig, it helped take my woodworking up a level or two.

The roller closest to you was not made for that application so it is not a design flaw but user error.

Ive used Banggood in the past and always been impressed with their gear. Have got pipe clamps and squares and they are both well made and far cheaper. Just bought the cheaper router lift for my Makita too so fingers crossed that will be good as well.

I subscribed for the good info you are giving it good to see the good quality you are showing..

I like your way of ranking the tools. It seems very logical. Keep reviewing more stuff like that. Thank you.

Can we stop and talk about how you did the intro plus sponsor plug and then were into the meat of the video in 6 seconds, so good!

Glad to hear that you had a good experience with Banggood. I ordered a quadcopter from them about 6-7 years ago. I had never heard of them, but took a gamble. Very impressed with the quality, price, and their service. I think delivery was about 3 weeks. They sent a European-style charger by mistake, so I emailed them, and had a USA adapter in about a week.

On the drill guide/press you need to register the flat side of the guide on the surface of the work piece. Then the guide can flip down. Also you had it backwards. Flip should be on the outside edge.

The tease of the futuristic router...savage!! Can't wait!

If you haven't figured it by now, most of the tools on Banggood are variations, or clones, of other more expensive brands. The drill guide is a clone of the Woodpecker drill guide. The roller guides are clones of the ones made by Jess'em. I have purchased some items from Banggood before, and have been pleasantly surprised by the quality. I just received the MoHoo Honing guide which is a clone of the Woodpecker honing guide. As for the Miter Gauge, Hooked On Wood, ep 11, reviewed the same miter gauge, and he demonstrates on how to make box joints on the table saw using that miter gauge set up. For anybody that's interested in the fence, but do not want to buy another miter gauge, you can buy the fence separately.

I love these videos! I’m stoked about the router video.

it's fun watching you have fun dude. love it! 👊

I love these buy and try vids immensely! I dabble in both woodworking and home machine shop, and there are tons of RU-vid videos in which people have either bought, or been sent by Banggood, various machining tooling. Even if they’ve paid for it, the reviews are typically very good! As far as the drill guide, I’ve used (and cursed) a General brand guide for many years. Even though I was far south of satisfied with it, my dissatisfaction was never great enough to convince me to pay the price for the Rockler! The other week I made my first pilgrimage to the new Rockler store in Charlotte, and after laying my eyes and hands on their version I was dazzled!! Of course I had one when I left the store! The thing is amazing!

Many of us have purchased from Banggood. The only issue is if you have to return a product, that can be a pain is the ass. If you get a product and it works, then I have found that you are good to go Thanks David, that was a GREAT video! !! !!!

Fun video - thanks! Keeping a regular eye on the random discounts on Banggood can save a lot of money on the already good prices for sure, e.g. I've seen the vertical drill holder at a lower price than you paid.

This series is awesome

Great video as usual. The roller guides I believe both go on the router table fence. One on in feed side and one on outfeed side.

I have bought a number of items through Banggood over the last few years. I have never been disappointed with the quality of their tools. But I would recommend that you read their ads VERY carefully. I have had a few surprises where I thought that I was buying a set of five and actually only got one. They seem to be using the "read the fine print" rule on some of their ads. Plus there are often optional sizes colours etc. Just don't speed through to checkout, and read all of the specs etc and you should be good to go.

I really appreciate these budget tool reviews. I watch den of tools, and he talks about how this tool is good this tool is bad, but I've learned that his opinion of good tools, and my opinion of good tools, is not the same.

Great video David. I love these videos that you’ve been doing like this. Great job on ranking the tools. I agree. I really wish you could’ve gotten the Dowling jig. I was considering buying that. I appreciate you doing the video. Thank you. Great job as always. 👍

Those stock guides both go on the fence. I got the JessEm ones. They work well to keep the piece down and into the fence, as well as preventing kickback with one-way wheels. Definitely a worthwhile thing to have at the router table! Always enjoy your videos!

Love your channel! You're a great wood worker. Watch every video. God bless you my friend!

Good information David, thanks for your research!

I think you may have been using the first tool, the router guides wrong. One is an in feed and the other an out feed, both should be on your fence. I have the Jessem guides installed that way and they work great.

I love the description/titles "Marble Machine Guide Rail" 🤔🤔🤔😂🤣

I bought the miter gauge for 50$ when it was on offer (there's always some merchant that has it on offer more or less). It didn't have the fence but it's not 100% necessary. The quality is really good.

i have the Woodpecker knock off track saw parallel guide and adjustable track square. They're actually pretty nice quality for a hobbyist.

Never heard of Banggood before, but they seem worth checking out. Like these purchase videos you do Dave!

9:05 that bit goes on top of the piece too... it's what helps to stabilize it so it doesn't tip over and helps with the sliding action of the jig.

I have that exact same drill guide. Ive use it to build my MFT table and it worked well when using my Stanley cordless drill, but when I used my Makita impact driver on it, the hex shaft broke, lol.

This is a great video. I have a question on your ultimate sliding table as to whay update on its fence locking ideas.

All of the woodworking tools I have purchased from BangGood have been of exceptional quality. I did follow Dennis from H.O.W. for recommendations in the beginning but placed other orders for items he did not review that in my eye looked well made and have not been disappointed with any of them. That router lift looks outstanding as well as their miter gauges and track saw parallel guides, fences, spiral carbide router bits and the drawer hardware mounting jig. Hongdui, Ganwei, Wnew, Drill Pro, Veiko and even some of the no name solid stainless steel squares are top quality. Keep an eye on their prices and you can get some super bargains,

On #1 despite the website drawing the second roller is intended to be also in the fence after the bit (left side) like the JessEm they are cloning.

Love this video series helps people see what to buy and not to buy thanks for doing this

I have the WNew mitre gauge, but I got the extending fence. Basically the same price, but the fence is huge. Love it.

I bought a kerf-maker from them a while back and it works just fine. Great video, thanks for making it.

I have the same Incra lift and found that a long Allen hex bit in a super cheap cordless drill makes for a WAY faster and convenient height adjuster than the provided tool.

I noticed on your router roller guides you had one of them set up incorrectly. Both go on the fence and are design for the roller to spin on one direction only to prevent kickback. I have the Jess-Um version of these. (notice the arrow on the guide for direction of wood)

I'm excited to hear about the fancy router. My routers were the only tools that didn't get recovered (I think) from when my storage unit was broken in to, so I'll need to replace them.

I have the drill pro doweling jig you didn’t grab. It’s a pretty awesome kit! Well built and easy to be accurate with.

I think the lateral stop on the drill press is up side down. Should clear the top when turned 180°

I had never heard of Banggood, nice to see there are some good deals out thwre. Keep being awesome abs making things!

I have been buying stuff from Banggood for over 12 years, and have never had a bad product, or an issue of any kind. They are legit, and well worth shopping. Cheers from Winnipeg.

I have bought several items from Banggood and cannot complain. My favorite are the Vieko right-angle clamping (in the faux Woodpeckers anodized red). I also recommend the ratching and f-style clamps. Great video and I am looking forward to getting some feed guides based on your review.

Really enjoyed this - I've looked at Banggood before, but didn't know what the quality was going to be overall. I'll definitely have to grab the router lift. I've been wanting one for awhile, but didn't want to pay $400+.

I have the same miter gauge but with an aluminum handle. I bought mine without a fence then ordered a longer fence with a tape measure and a stop. I use it all the time and am very happy with it.

Seen a few reviews of some of those picks. Surprisingly good was the opinions.

I was considering buying a UJK router lift a couple of years ago, but ended up buying a Triton MOF001 router (also sold as CMT brand), that pretty much has it built-in. The router even comes with a winding handle and a starter pin, the only thing required is a mountin plate. The online shop I bought the router from also sold a mounting plate from Rockler, that is specifically designed for the Triton routers. Triton makes bit collets in all the standard sizes from 6mm to 1/2" (6, 8, 12mm / 1/4", 1/2"). As I bought it in Denmark, it came with 6 an 8mm collets, and I bought the 12mm and 1/2" ones off Amazon. But the best thing about the Triton is that it is insanely easy to change the bits. When the power switch is off, the collet can be raised so high that the collet is above the table, and the spindle locks automaticly in the top position, so all it takes is a single 24mm wrench to loosen and tightening the collet. Only minus is the adapter plate in the Rockler mounting plate, it is quite flimsy plastic. I plan to make one from aluminium, but hasn't gotten around to it yet.

Nice help full video help us to know what not to buy and if we can afford it also good humor.

Best thing I bought from Banggood (other than the 3D printer) was the drawer handle layout jig, super high quality

I usually use those roller guides on the infers and out feed position on the fence. I think they are made by Jessem or something.

Thanks for the video. Had a few good laughs and at least we see some different tool options!🤔

I subscribed merely because of your fair and upbeat attitude.

Did you know Porter Cable had a really cool pocket hole cutter that worked like a chop saw. Just didn't cut the pilot hole but was a joy to use

I have the Wnew miter gauge, and it's fantastic.

The roller guides at the beginning look like an awesome alternative to the Jessem guides

We shall see. I have wanted to buy the JessEm 04301 Clear-Cut TS Stock Guides but they are expensive and I have had other needs. After watching this video I purchased the Roller Feeders you demonstrated. I await their arrival.

Great concept. Great video. I'm well aware of the long term issues of not buying domestic, but as a retiree, I must watch the personal budget.

I'm curious how you would rate the Rockler drill guide to the Milescraft drill guide though. I happened to pick up the Milescaft one a few years ago when I was building my desk and loved it. But I do like the way that the Banggood one has those rods that extend out to make a much larger base to balance on.

I have that miter and it works well. I have a track system from Eureka Zone and it is fantastic. Fits any saw, has renewable edges, has router base and it is made in America (Florida)

I'm buying from Banggood for years never had any issues with them, from electronics to woodworking tools, I have that miter gauge and works really good.

The thing about the track for the saw is that it is for a saw for stone, not wood, they are smaller and waaay faster, so they basically just burn the wood. I leave in Brazil and these other saws are cheaper, so people sometimes buy them thinking they are for woodworking, but they are not. Now you know

If you had bought the mini chain saw, you would understand why they have so many... I had a friend convince me to get one, and WOW, small, battery operated, and truly amazing for cutting branches and such. You can whip it out and trim what you need.. VASTLY easier than digging out your big chainsaw, and there are SO many things you can use it for... Trees, shrubs, trimming wood pieces... shaping things etc.. I have a 6" chain, and it can cut through a branch that size without any issues.. and it keeps on cutting well.. Just one o f those really really good tools..

roller guides are used on the vertical face - one for in-feed and one for out-feed just like the Jessem.

Awesome video! If you do another banggood video I’d love to see the clamping square system compared to the wood peckers. Thanks

I always want instructions too, David. I've ordered a few of your shirts over the years and not one of them came with instructions. Don't worry, I figured them out.

I found the same track on taobao, looks like you got the plate for a tile saw with 4" blade, the brand offers different plates for 7' and 9' saws.

Dave your the man thanks for the informative videos you helped me save $$$$

that shark next wave cnc router lift is pretty cool. but ive been able to do that with the MLCS Router Lift Pro and incra fence for the past 10 years

I haven’t watched in a bit and man your shop is looking cool af. The lighting and camera work is noticeably richer as well. Mind sharing lens and camera used?

The roller feed and the miter blew my mind actually, I'm probably going to end up getting them. They even had a roller feed for table saws on their site which I may try out.

I love my Incra 1000SE miter gauge. It has accuracy to the Tenths of a degree and costs around $200. I got mine on sale luckily.

I have the miter gage and it works like a charm

I have the miter gauge; works beautifully.

Thanks man -- super interesting

I've used Banggood a couple of times. If you don't mind waiting for the product shipping from overseas, I can't fault them.

Do those rollers also only roll in one direction? There are some that do, and act as anti kickback devices.

I had never heard of the site..glad to see other options aside from amazon

My biggest gripe for the track saw is the fact that it doesn’t register the zero edge which I think is 80% of the benefit over a circular saw and straight edge.

Love the face brother!!! Ive used Bang good for a few things...some hits, some misses. But overall Ive been happy with their stuff.

One of the 1st woodworking/project videos I watched on RU-vid had a guy who was building kitchen cabinets for his wife(I assume.?), Then the guy went to build a work bench to hold his jobsite table saw, and then he built a nice Miter Station for his Miter Saw. He used pocket holes everywhere, on everything, and he never once used a pocket hole jig. Not once. It 2.5yrs ago, as was returning to the hobby. While I was watching this gifted craftsman, who wore sandals while he worked, "I thought to myself, wow, it would be cool if someone made fixture so that other people who hadn't done it a million and a half times could work with this level of precision."

I skipped over this video a few time because of the title. I am glad I watched it for one main reason. I seen their site but the prices are so low I was worried it was a scam. I will revisit it now. As far as the lift goes, that’s almost the same price as the Kreg that I have. I would never chance the quality and support a big company gives me for a few dollars. And I have had some amazing experiences with Kreg and Earlex to name a couple.

Hello this concept seems exactly the same as Dennis from hooked on wood does on his china tools series just a little more in depth thanks for the video it was fun got the mitre gauge my self it's were nice