I decided the Legendary Honda 250R is slow.

Подписаться 239 тыс.

Просмотров 162 тыс.

50% 1

I decided the Legendary Honda 250R is slow.
#honda #2stroke #power
I felt it was about time to make the 250R faster than what it looks. What do you guys think of the mods I've chosen so far?
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
JIS Screwdrivers - amzn.to/3OQBl0A
Scales (similar to mine) - amzn.to/3ssTN6K
Tusk Scissor Stand -
M12 Impact - amzn.to/3PfzEKp
M18 Impact - amzn.to/3OOx2lb
T-Handle Allen Wrenches - cuts2.com/kSEVT
Billet Cases - Email 250rcases@gmail.com (Mention my name for 10% off)
DMR Lynx Cylinder Kit -
Zeeltronic Ignition - (Code: Sabo10 for 10% off)
Zeeltronic Mount - cuts2.com/qHJEQ (Code: Sabo10 for 10% off)
Billet Clutch Cover - cuts2.com/OYpLz
Billet Stator Cover - cuts2.com/UhlTM
Case Saver - cuts2.com/EMLVy (Code: Sabo10 for 10% off)
Swingarms and A-arms - fullflightraci...
SPONSORS/COMPANIES I TRUST
⬇️ OEM PARTS, PLASTICS, BEARINGS, SEALS ETC ⬇️
Rocky Mountain ATV MC - bit.ly/32OHs02
⬇️ POWDER COATING ⬇️
Bonehead Performance Coatings - boneheadperfor... (Mention my name and get 10% off)
⬇️ SUSPENSION ⬇️
Rocket Ron - www.rocketronra...
⬇️ CASE SAVERS & SKID PLATES ⬇️
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
⬇️ PREMIUM BAR CLAMPS & THROTTLES ⬇️
Urmosi - urmosi.com/
⬇️ USED PARTS & REBUILD SERVICES ⬇️
Power Sports Nation - www.powersport...
⬇️ VAPOR BLASTING & ZINC COATING ⬇️
MotoBlast - www.njvaporbla...
MERCH - michaelsabo.com/
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 672

@MichaelSabo Год назад

I will be at Little Sahara Sand Dunes in Waynoka OK from the 29th to the 30th of September 2023 with this 250R and the TRI-Z! 🤘 Come out, say hi and ride 🤘🤘🤘 I felt it was about time to make the 250R faster than what it looks. What do you guys think of the mods I've chosen so far?

@IndianGiver350 Год назад

Surprised you didn’t leave the 250R in MX configuration and focus on the Voodoo Banshee for dune work

@blacksmokematters4521 Год назад

Better get you a puma engine if you have 8 inch plus extended swing arm lol

@MichaelSabo Год назад

@blacksmokematters4521 come out and line your puma up at the dunes man

@blacksmokematters4521 Год назад

@@MichaelSabo I don't have a puma engine but to have a 8 inch swing arm takes more chain and more power and a loss of power in ways lol and less traction mines a 6 inch on a 450r with a big bore kit web cam race cut gears over ride transmission if i was to do it again I'd extend front end of bike instead

@cromm2279 Год назад

Love watching your builds my friend! Cannot wait to see her chewing sand! 💪🤙🎸😎🇺🇸🇺🇸

@daxmorlock7846 Год назад

Not surprised you're making this machine even better. You kill it every time and each build gets better.

@streetrossi937 Год назад

Hey, Michael, do you have any experience with Henson

@streetrossi937 Год назад

Hey, Michael, I was trying to say. Do you have any experience with Henson clutches if so? Are they worth the money?

@MichaelSabo Год назад

Hinson? Yes, they make solid clutch components.

@mzhammer16 Год назад

I’ll donate my basket case blaster to you if your interested I messaged you on ig

@streetrossi937 Год назад

Hey, Michael, I'm not going to say I'm not interested. Cause i'm but i'm not mechanically inclined and if I take it to a dealer

@shaun88R Год назад

Will always be my favorite build, for so many reasons. Going to be really cool to see it get the DMR Lynx 380 upgrade and rip the dunes again! 🤘

@867diesel Год назад

i want billet cases for my R 🤟🤟

@BoostedEdge Год назад

Man I absolutely love this rebuild, I remember him taking the blaster in the sand and he loved it so I can’t wait for him to see how that big block will feel. Also huge shoutout to him for sticking in with the RU-vid no one really understands how hard it is to push these videos out. How in depth he goes for us. Just overall a great guy love him always joking about selling used parts on eBay then BOOM in the trash. Keep it up man always love when you upload, ever since the kfx build I have been watching and had to go back.

@MichaelSabo Год назад

Dude this made my day; thank you for all the love and I'm glad you enjoy my videos 🤘👊

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘🎉

@yfzrider729 Год назад

You have a really great talent for builds. What you are creating is artwork. It kind of reminds me of “American Choppers” but for quads.

@MichaelSabo Год назад

Man this is a big compliment, thank you!

@BrianJacobsen-vn6is Год назад

Except Mikes Quads Dirt Bikes run n ride better. Ever road an American Chopper.?.Watch yourself especially if it's open primary. Take a right corner too deep sharp. Primary catch pavement jack your back wheel of the road. Send you to the ER. Some of choppers( bikes) were ridiculous. Dirt n Dunes where it's At.

@chadriddle3517 Год назад

Mike, this was my favorite build . It’s hard to see it change but after seeing what your doing . It’s going to be amazing! You got outstanding taste in how your build things and make it all come together! One day I have a feeling your quads will be collected

@MichaelSabo Год назад

That's a big compliment man; It's a hard call changing this build but at least there's plenty of documentation of the stages it's been through!

@867diesel Год назад

he shouldve just built a 2nd one like any normal person wouldve done 🤣🤣

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘🎉

@skeeterdirks3992 Год назад

Those cases are amazing!! A ton of time went into developing those and the amount of machine time in those is a gob of time. Can’t wait to fallow along in the build.

@shanegrunke4256 Год назад

Was not expecting this when I saw you dropped a video. Still loving all the content and love to see this thing come back. Yamaha and Suzuki 2 strokes are great, but nothing beats the joy of riding a well built honda. Keep on keeping on and cranking out amazing videos🎉

@MichaelSabo Год назад

Thank you for the love Shane! Had to get this one rolling to have it ready for next month 🤘

@DnBL0ser117 Год назад

Wow! I really wasn't expecting to see the 250r again. This build is going to be insane!

@Mac181 Год назад

19:59 that swing arm is sick

@VermontLife Год назад

I wanted to give a shout out to the folks that are supporting Mike through custom one of a kind parts. It's exciting to see and gets the community excited. I hope to see more of this type of collaboration, innovation and support in the Quad community. Mike, you've done well networking with the industry on behalf of all of. Keep it up all!

@fullflightracing634 Год назад

Thanks @VermontLife! I know we are only one of the many helping Mike with these builds and we are happy to do it. It’s always a challenge we love to take one once in a while to break up the everyday stuff. Mike is doing some great things for the community and there are tons of people learning more about their bikes through his channel only strengthening the communities. Love it when new videos come out!

@kristianparadiso1626 Год назад

Thank you for your support man I’ve been following you sense before the 250r series and I’m going on 6 months in the army so for you to do this build is incredible

@MichaelSabo Год назад

Thank you for your service and thank you for following my videos for so long 👊

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘

@hutchracers Год назад

You'll love it! My 86 has an 82mm Lynx with a 4mil stroker crank and it rips in the dunes! It was one of the first Lynx cylinders from CPI but I couldn't be happier with it!

@paulbudford Год назад

A video full of fantastic parts. But then the swing arm is unboxed! this thing is going to look amazing. And preform even better. 👍

@TELE.GRAM-ME_MichealSabo1 Год назад

"🤘REACH OUT🤘"

@_Otaku-kt8be Год назад

I'm a disabled vet injured in Afghanistan thanks for your support.

@FearGrave Год назад

I wish nothing but the best for you

@MichaelSabo Год назад

Thank you for your service and I wish you a 100% and speedy recovery 👊

@Davido50 10 месяцев назад

Thanks for all you did for your country sir. Your the real heroes! -Ohio

@NovaMudder Год назад

Your attention to detail is next level!!

@MichaelSabo Год назад

Thank you man!

@loganreed3589 Год назад

Absolutely going to be an incredible build I'm stoked for this one!

@davidhughes4659 11 месяцев назад

Hey bro your top notch man. I've watched so many builds and videos.Your straight up legit, no short cuts thorough as hell...Naturally!! Keep the builds coming.Your amazing brother,very skilled.. Thank you.. Hopefully one day I'll be able to get me and my boys quad like one of yours..

@spexsclan3234 Год назад

Can’t get too rowdy, proceeds to do what we all would do and pins it. Love that🎉

@virgilpayne2804 Год назад

I think Dave Moore Racing also helped DRW develop that ignition. Pretty sweet setup! Dave has one in the 350cc and it RIPS!

@duneracerweston Год назад

That would be correct.

@MichaelSabo Год назад

Indeed he did!

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘

@pbag26 Год назад

When that engine came together, it was awesome. Loved the dedication. More power. I enjoyed the video. Thanks.

@mikebarriball Год назад

THAT IS GOING TO BE ONE BADASS MOTOR. I CAN'T WAIT TO SEE THE FINISHED QUAD.

@brandondixon4457 Год назад

My favorite quad youtube channel and my favorite build to date! Good luck on it Mike!

@evanwildman7701 Год назад

I got the exact set up about 3 years ago when they first had all of this in the works Dave dynoed mine it put out some serious numbers. It would be really cool to here back from you maybe we can talk 250r’s

@MichaelSabo Год назад

I'm sure Dave has that thing dialed 🤘

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘

@connorwaryasz549 Год назад

Scott Moser is the sh*t! He lives real close to me and is a huge help, he rebuilt my R engine and his work is quite impressive, he always has answers to my questions and is always happy to help! Very knowledgeable and he knows his sh*t! Glad you’re colabing with him, hell of a guy! Really glad to see the R making an appearance on the channel again, cant wait to see some dune vids!

@UnorderlySkills Год назад

I didn’t subscribe when I binged you videos last year but the algorithm brought me back!!!

@eshott396 Год назад

Much love from here! We own 2 250R’s😊🕺🏻 I thought you sold this for some reason! Glad you have it man! Awesome bike!

@robbybrown8628 Год назад

I'm subscribing. The number of MFer's he used putting together the banshee makes me realize the amount I use in similar tasks is appropriate. Great content.

@gnarlyanimal Год назад

I’ve been eyeballing thoes billet cases for a while now. Soooo sick

@MichaelSabo Год назад

Wild in person man!

@Davido50 10 месяцев назад

Sounds good. 👍🏻 You found a great machine somehow! Can't wait to see the finished product. 💯 -Ohio

@timtrax918artisan8 Год назад

Brings back memories of the early 90's I had a Curtis Sparks built 250R engine and the best at the time chassis. The tulsa shootout was the ultimate test, Could never beat Greg Baker and his Curtis Sparks powered 250 R but it sure was fun.

@MichaelSabo Год назад

Dude I heard that Curtis Sparks himself was a force to be reckoned with on the track, not just his building skills

@logancriswell4612 Год назад

I'll be out there that Thursday through Sunday. Built my first banshee watching your videos over the summer so this will be my first time to get it out. Would love to meet you hopefully, I'll see you there! I'll be on a red and white banshee.

@TheSimHome Год назад

I have been waiting so long for you to actually make a video on the 250 again it’s the reason I found your channel

@nathaniel4756 Год назад

Glad to see the R back on the channel,I live local to you and wanted to say I recently had bonehead powder coat my 250r frame and they are great people and do great work. Wouldn't have used them if I didn't watch your videos,thank u for that. My build is almost done be sick to ride with you sometime not a fan boy just a 250r enthusiast and you gave me alot of info and inspiration. Keep up the awesome videos

@s13nate Год назад

That rip down the street was gangster! I’ve been hoping for more videos on this quad

@jmaxim80 Год назад

Damn brother you are trying to turn into Tavarish of the quad world on us already. That is some nice kit you got there. That bad boy is gonna rip all day long out on the sand dunes.

@MichaelSabo Год назад

That's a big compliment man; Tavarish is the man!

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘🎉

@Berm_Blaster Год назад

My brother's ESR 330R was an absolute beast in the dunes. When he finally switched to the ESR TRX11 exhaust with center mount silencer it really woke it up but it definitely needed an even bigger carb. With long travel setup it was by far the funnest dune bike. I weighed 120lbs and I couldn't keep it down. Only downside was 110 leaded was over $7'a gallon and we would go through more than 30 gallons per trip per bike.

@MichaelSabo Год назад

Dude, a 330 with a 120 pound rider? You must have been flying!!

@devilsdust473 Год назад

Love ESR engines, have had different sizes over the years for different types of riding from Eddie with nothing but great results. 👍🏽

@Berm_Blaster Год назад

@@MichaelSabo Ya lol a bit much for 15 year old me to handle at 120 pounds. It was pretty interesting to see the difference between me and my brother at 230 pounds

@URBANAMERICANTAC Год назад

That’s awesome to see parts still being made for these quads.

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘

@untestedunit7782 Год назад

Your 250r videos are helping me with parts replacements for my 250r 🤙

@malachikocher1187 Год назад

Not gonna lie I was super excited when you pulled that cylinder out. Thought it was gonna be one of Dave's Toyger Cylinders haha.. Hopefully I can make the ride and meet ya and sick build as always.

@tonybrito1401 Год назад

HOLLY SWINGARMS BATMAN, awesome upgrades SABO , I've been watching your channel since birth and I gotta congratulate you on your growth and these high quality / high horse power builds. Dyno tuning this again with the new mods ???? I hope so bro , I wanta see 65hp pumpin outa that badboy .

@MichaelSabo Год назад

Thank you for watching since the beginning man! If I dyno it won't be until down the road simply because of the time frame, but I would guess over 70HP and more on meth 😅

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘🎉

@DerredmaxTRIAX Год назад

Again Mike this channel is by far the best TV on youtube. The quality is through the roof! I'm glad I can help a little.

@MichaelSabo Год назад

Dude, you help more than a little; seriously warms my heart every time you do this, but please remember man, you can always watch for free; I appreciate even just you watching to support. Thank you so much!

@DerredmaxTRIAX Год назад

Life has been really good to me man , I have everything I need. Its just my way of saying keep up the great work. Its nice to see your Dad help out to. He seems like an awesome person. See ya...

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘🎉

@markraatz4137 Год назад

Back 86 I was run that same setup, yes ran the pro circuit for years and retired in 1990. Key was ignition timing, cylinder porting, Paul turner pipe, I can’t remember how many cc the head was, but that was also redone. Ran 36 mm Mikuni carb, also had 38mm, 36 was easier to jet for the bottom end, to get it all perfect, all my engine was put on a dino, to get the jetting spot on. Custom fuel Reeves were use. They only lasted for about 3 to 4 races then had to be replace. I have beaten team Honda multiple times, by engine builder was Kustom kraft. He knew how to build dreamily, fast reliable engines. Special oil in fuel were also used to keep it together.

@haydengeorge6179 Год назад

Between yourself, 2vintage and my father you guys have inspired me to build/restore a 2003 honda 400ex ive already bought the 416 kit, the goal for the honda is to get it to compete in ice racing and possibly play in some sand dunes later. Love the channel man keep it up.

@frankkrezel7922 Год назад

Mike, this thing is going to be wicked gnarly!!🤙👍. Cant wait to see it and definitely hear it!

@njmxjunkie3128 Год назад

Mike man you’ve gotta get more mercy out and promote the hell out of it. Maybe come up with something you can sell also that’s bigger than your channel, I also think you should take this top quad thing to another level. Maybe something like Cameron’s broke to built contest, bring life back into sport quads. (Although I’m a dirtbike guy) your killing it with views, 10x the amount of views a lot of guys with over a million subs have. There’s no reason you shouldn’t atleast hit 500k before January. Collab. Collab. Collab. You deserve to be the biggest or one of the biggest on this platform in your genre. Your attention to detail, build quality and video quality shows you put in the work bro. This platform is yours for the taking you just gotta put it in your pocket man

@yellowdog2181 Год назад

These quads hold a special place in my heart, back in 88 I was 16 and was lucky enough to get one . Having just lost my father my mom would do anything to help keep me from my destructive tendencies.

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘"

@-jeffreybollenbach- Год назад

Wow dude wasn't expecting a video today. Been a crazy week, thanks for the video to help calm it down.

@MichaelSabo Год назад

Thank you for watching it man!

@commentpulling Год назад

Love it!!!! Makes me want to build one. Can’t wait to see this thing perform!👍🏻 Keep it up Mike!!

@MichaelSabo Год назад

Thank you man!

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘🎉

@TORKiT Год назад

380 is going to have some balls. Congrats on 200k the channel took off.

@MichaelSabo Год назад

Thank you for the love man!

@waylonmcdaniel1725 Год назад

Finally the trx 250r is back love it can’t wait to see more videos on it the dune videos were amazing keep up the good work!

@gaucker398 Год назад

That new swing arm looks absolutely insane!

@zacharydavidson5000 Год назад

Looking forward to seeing you there!

@justingodbey4984 Год назад

I was almost disappointed when I didn't see a new corvette, or tri-z. I'm glad to say this has been one of my favorite videos as of lately. Good job!

@MichaelSabo Год назад

Thank you for saying this man; I'm glad you enjoyed this video. TRI-Z and Vette will continue soon!

@theglitch99 Год назад

ALWAYS, enjoy your content! If your a "Jr builder" than I must be a fetus? 😂 your skillz are TopNotch! 👍🏼

@moon9995 Год назад

It’s always a good day when Michael Sabo posts a new video

@jeredalmeida1880 Год назад

You ROCK, Sabo!!! This is the quad that made me a subscriber.

@MichaelSabo Год назад

Thank you for subscribing man!

@jeredalmeida1880 Год назад

@@MichaelSaboDon't mention it, my brotha. Watching your channel kept me sane throughout the Covid shutdowns.

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘"

@mikewisher4083 Год назад

Man glad to see you still have the King . Will always be one of .u favorite builds u have done. I'm say around 350 Can't wait

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘"

@justincarlfilms Год назад

Hey,just FYI, the 162 main worked, so freaking good. omg, the difference jetting can make. Thanks for your input 👍

@MichaelSabo Год назад

Awesome to hear Justin! It really is wild how even just one jet size can wake a machine up!

@justincarlfilms Год назад

I can't wait to see the 250r motor assembled, bro

@anthonyludwikoski6282 Год назад

a very close friend of mine has a 87’ he bought new. full mod, it’s more of a stock looking wheeler but it’s all chrome, not a scratch. that’s a 410cc 3 mil stroker motor. sweet ride!

@wrenchin-n-wheels9482 Год назад

What an amazing build for your beautiful Patriot Bike!! I currently own a super built Banshee but ive always been a Honda guy. Well now I'm a Honda and Yamaha guy lol.

@michaelbiel7473 Год назад

Thats the sickest 250r engine ive ever seen cant wait to watch

@chuckfrisoli1170 Год назад

You’re making my favorite build even better 🤯

@mzondi1970 Год назад

I haven't been watching much lately I had to get rid of all my four-wheelers to pay for cancer medication so watching the video makes me want to ride even more and I don't really have income

@MichaelSabo Год назад

Sorry to hear about that man; I hope the future has better things for you and you heal 100%

@mzondi1970 Год назад

@@MichaelSabo I want to ride again so bad

@schimming1122 Год назад

I love this thing the first video I ever saw from you was when you blew the engine a couple years back. I’ve watched every video since keep up the great work!

@ebkonddk Год назад

so happy to see the 250 get stuff done

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘

@priyamunera7518 Год назад

Man..!! Was not expecting a 250r video.!! Insane mods comming, can't wait to see next videos 😎

@Shadowz_660R Год назад

This is super sick man what a bad ass build beautiful swingarm and those cases wow. Larry is great man he made a set of A arms like the ones you used on the raptor 660 build for the YFZ450 long travel shocks and he didint even charge me more great dude.

@meltedpistons Год назад

Always a good day when sabo posts a video! 🤙🏼

@lanniewiant8269 Год назад

Wow bro so awesome can't wait to see this thing run your killing it bud !!!

@MichaelSabo Год назад

Thank you as always Lannie!

@82ndbluedevil Год назад

Can't wait to see it when its finished!

@stevenmejia4982 6 месяцев назад

Disabled Vet here. Thanks for representing🤙🏻

@richknight7307 Год назад

Ok that swingarm is f’n sick brother I can’t wait to see you put this thing together with these mods it’s going to ridiculous I’m so interested in that zeeltronic been looking at getting a couple for my warriors hoping you will go over it in depth in your build vid

@MichaelSabo Год назад

It's going to be a learning curve for me as well since this is my first one. I know DRW has done extensive testing with it when it comes to the Warrior!

@richknight7307 Год назад

@@MichaelSabo yeah I’m trying to hold off for sec u til he gets the a arms for the warrior in full production so I can buy those and that at the same time the arms look sick too my man

@justinm6110 Год назад

I gotta say, you have come a long way since i 1st started watching your videos 3-4 years ago, i cant wait tell a new Michael Sabo video comes out , this is the sickest 250r out there , your KFX is still my favorite quad , because it was complete garbage when you picked it up and now it looks amazing, i had to go buy a kfx because how awsome yours turned out.

@MichaelSabo Год назад

Dude thanks so much for the compliment and for watching for so long. The KFX is definitely a sweet build; happy to hear you got one yourself!

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘"

@bilboswaggens2975 Год назад

This is a bittersweet build to me. It’s sad that nobody runs old 2 strokes on the mx track anymore. Everyone keeps throwing efi 450 motors in old chassis. But as someone who frequents silver lake, the dunes rock!

@ComputerCapone Год назад

Believe it or not your still a do it yourselfer. Not a bad thing eigther. That why we love your channel.

@dylankelley6206 Год назад

Hey man I just wanted to say thank you for putting in 100% in everything that you build or design .Much respect 🙏 all the way from Biglake Alaska

@AllThingsCycle Год назад

Another 250R build series 🤘🔥

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘"

@ctait831 Год назад

Brother, this is just amazing! Taking it to another level 🤘🏻🔥😎 Really looking forward to seeing this come together like all your vids and projects 🍻

@ALDA2479 Год назад

Beautiful pieces the engine is gonna be stellar the swinger true work of art Full Flight has been around along time with never having the best reputation of quality but that swinger is special and personally I'd love to see them as a brand get it there simply because for anything outside of a Trx and Yfz they're 1 of the few options when it comes to arms for a reasonable price for ur more rare machines

@fullflightracing634 Год назад

Thanks @aldamoney7988 not sure if you knew but I am the new owner of the company and took it over 4 years ago. We really only took the name and arm design that’s all. New equipment, new employees and even moved it to a different state. Basically the name and the design of the arms and that’s it. The last couple of years we have worked very hard to rebuild the reputation and improve quality and customer service. We have come leaps and bounds to get where we are today from 4 years ago. This year we decided it was time to rebrand. So we have been working on completely rebranding the company and will offer a totally new design for our arms next year. Keep an eye on out for our new website also. Thanks

@noluck20 Год назад

Yes quad content!!! Hopefully I can make next years meet. Still waiting on my panthera engine to be done :)

@MichaelSabo Год назад

A lot of people mentioning the Panthera engine lol

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘🎉

@ni_wink84 Год назад

Aww man!! I thought I was excited for the tri-z because I love trikes but the patriot 250r was my favorite build you have done, this is going to be freakin AMAZING!! Was kinda hoping to hear you went full 500cc though 😂! I can’t wait to see the video of this thing destroying the dunes! Another banger video from Mike!!

@MichaelSabo Год назад

Haha, glad you like it man! 500cc would be wild but these 380 top ends make wicked power!

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘

@theexisting1514 Год назад

always love a surprise video! also good to see this thing back in action. but..... we never got a raptor ride video! lol you still have it??

@MichaelSabo Год назад

The ASPCA? Yes, I do, and still with zero seat time. Sad and I will eventually have a ride on that, I really just moved onto other projects.

@Pittsburgh-412 Год назад

That swingarm is a work of art. It's something I'd hang on my wall lol. I think the quad will weigh 327.6 lbs

@MichaelSabo Год назад

It's definitely cool looking!

@fmscooter768 Год назад

i really love these colours, bronze, brown, grey, silver, absolutely awesome!

@kdcustoms1272 Год назад

Wow 200k now. Congrats!

@MichaelSabo Год назад

Thank you man!

@chaneybruton2912 Год назад

So pumped for this build!

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘🎉

@foxracer3098 Год назад

Love the vids you always get into detail on every part and piece and explain how everything works and how it goes. Learned a lot about building quad from you. U should build a yfz450 carb model next I have 2008 yfz450 special edition titanium 5valve would love to learn more about the breakdown from u.

@Mac181 Год назад

Can’t wait to see it done along with the 3 wheeler

@BCHonea Год назад

Wonderful job as usual! These quads are truly amazing. I’ve had 4 over the years and the only machine I’ve had that’s more fun is the fl400r Pilot. Doooooo one!!!!!!

@krisi.2011 Год назад

Your original build on the 250 looks incredible, cant wait to see your sand dune build !!!!!

@TheCowboyfromhell87 Год назад

That thing is so awesome it's hard to imagine it being any better, but knowing the way you do it, I know it's going to be a masterpiece.

@TELE.GRAM-ME_MichealSabo1 Год назад

"🤘REACH OUT🤘"

@lestaylor3641 Год назад

Hey michael i'm benging the 250r series. Freakin awesome man. In that series people talk about glamis and ive been there numerous times. Its hard to beat but for you i just did a mileage check. Stay north and go to st anthony in idaho. Its abot 300 miles closer and views from there are amazing. Just lookin out for you . The 250 r build is f ing awesome just lots of questions about set up and fuel mixtures.

@smward1126 Год назад

Love seeing these dedicated builds!

@jonnyretro2235 Год назад

Great vid Mike! You really need your own property buddy to bring your content to the next level.

@MichaelSabo Год назад

Thank you man! I am searching

@justincarlfilms Год назад

Love this quad, bro!❤

@colby_graba Год назад

There is a company that is making the arched swing arm. It pretty much resembles the one you have there and you can get it in customizable lengths. Can’t wait to see it done.

@MichaelSabo Год назад

Fireball racing? If that's the one; that looks sick too!

@colby_graba Год назад

@@MichaelSabo yes that is who I was referring too. They are both a work of art and look great!

@ButteredToast_93 Год назад

I NEEEEEED to see this build video asap!!!

@taperface2053 Год назад

I have been waiting for this for olmost 4 years it seems my absolute favorite build on you tube because of this bike. Iv got back into building my own stuff Mr sabo love this bike can't wait to see what u do with it I'm so hyp off this video hell yea my dream bike

@MichaelSabo Год назад

Hell yea man! Glad you're enjoying the R content and I'm glad to hear you're building!

@TELE.GRAM-ME_MichealSabo1 Год назад

🤘REACH OUT🤘