this simple joint isnt simple

Подписаться 198 тыс.

Просмотров 247 тыс.

50% 1

To start comparing quotes and simplify insurance-buying, check out Policygenius: Policygenius.c... Thanks to Policygenius for sponsoring this video!
GRAB THE PLANS AND SKETCHUP FILE: www.spencleyde...
👉 All My Plans - rebrand.ly/66h...
👉 Merch - rebrand.ly/d52...
👉 Patreon - rebrand.ly/txq...
👉 Instagram - rebrand.ly/6mp...
👉 Leave a Tip - rebrand.ly/5sj...
👉 Podcast - anchor.fm/offt...
👉 Tiktok - rebrand.ly/wpw...
👉 Website - rebrand.ly/99i...
👉 Subscribe to My Channel - rebrand.ly/tqb...
👉 Join My Monthly Newsletter - rebrand.ly/b87...
💰 Exclusive Viewer Discounts 💰
SEE ALL DISCOUNTS - rebrand.ly/tfp...
Bits & Bits Router/CNC Bits (10% off Code "SDC")
rebrand.ly/njv...
Starbond CA Glue (15% off Code “SDC15”)
rebrand.ly/97o...
RZ Masks (10% off Code "SPENCLEY10")
rebrand.ly/mtv...
Elgin Bluetooth Hearing Protection (10% off Code “SDC10”)
rebrand.ly/o8v...
Serious Grit Sandpaper (10% off Code “SPENCLEY”)
rebrand.ly/z1c...
Arbortech Tools (10% off Using Code “ACP10”)
rebrand.ly/9pt...
TotalBoat Epoxy + Finishes (5% off Code "60C7XF2XQQAS")
rebrand.ly/r6y...
🛠 Tools & Supplies 🛠
All My Tools and Gear - rebrand.ly/il7...
Bluetooth Hearing Protection (10% off Code “SDC10”) - rebrand.ly/o8v...
60° Chamfer Bit (10% off Code "SDC") - bitsbits.com/p...
Roundover Bit (10% off Code "SDC") - bitsbits.com/p...
Planer - amzn.to/3ahVRCr
Total Boat 2:1 Epoxy (5% off Code "60C7XF2XQQAS") - www.totalboat....
Syringes (5% off Code "60C7XF2XQQAS") - www.totalboat....
Black Pigment (5% off Code "60C7XF2XQQAS") - www.totalboat....
Yellow Router Push Blocks - rebrand.ly/p4n...
Yellow Table Saw Push Blocks - rebrand.ly/c47...
Sandpaper Discs - lddy.no/1em9k
Glue Bottle - lddy.no/1ehd3
Yellow Plastic Spreaders - lddy.no/1em9l
Blue Painters Tape - lddy.no/1em9m
Threaded Inserts - lddy.no/1g3o9
Foam Interface Pads - amzn.to/44jI4py
Kreg Featherboard - amzn.to/30WPUcY
Kreg Miter Gauge - amzn.to/2ZwsYk0
Hot Glue Gun - amzn.to/3XSPNI0
Kreg Router Lift - amzn.to/3l0zuXn
Large Bosch Router - amzn.to/2QbTFWe
Makita Sander - amzn.to/3ac7yL5
Festool Rotex Sander - amzn.to/3gOIUa1
Festool Track Saw - amzn.to/3uWg88F
Festool Domino - amzn.to/3OUG8fE
Heat Gun - amzn.to/3HViHiG
Wood Glue - amzn.to/3yULkYN
Orange Trigger Clamps - amzn.to/3sWh5ie
Orange Parallel Clamps - amzn.to/3DAuPUH
Orange F Style Clamps - amzn.to/3DAuZvh
🍿 Related Videos 🎥
Table Saw Router Table - • why hasnt everyone bui...
Milling Boards WITHOUT a Jointer - • Truth About Jointers U...
Joint Boards With Router Table - • DONT BUY A JOINTER...d...
Drill Charging Station - • this changed the way I...
Systainer Storage - • I BETTER way to store ...
TOOLS YOU SHOULDN'T BUY - / cx1n_lt27m
DONT BUY THIS MITER SAW - • one HUGE mistake
How to Get FREE TOOLS - • Video
First 5 Tools You Should Buy - • Video
DIY Clamping Blocks - • I dont understand why ...
Flip Top Tool Cart - • Flip Top Tool Cart Ful...
Mobile Workbench - • The Truth about My Maj...
🔎 Shop Tours 🔍
• Shop Tours
🎸 Where I Get My Music 🥁
rebrand.ly/evk...
*DISCLAIMERS: Some of the above links are affiliate links.
Mailing Address:
Spencley Design Co
1747 Olentangy River Rd #1330
Columbus, OH 43212

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 257

@SpencleyDesignCo Год назад

To start comparing quotes and simplify insurance-buying, check out Policygenius: Policygenius.com/spencleydesign. Thanks to Policygenius for sponsoring this video! GRAB THE PLANS AND SKETCHUP FILE: www.spencleydesignco.com/products/eleanor-dining-table-plans

@andrewjonas5523 Год назад

Damn man, it felt so good to click a title that wasn’t click bait. Great job, and I really enjoyed the build.

@Sam_Francis Год назад

Check the title again 😭

@klashnacovak47 Год назад

Maybe he didn’t understand why people make that so complicated.

@andrewjonas5523 Год назад

Well….. Nevermind

@alaskaseriesinflatableboat2282 Год назад

Mix your pigment with your epoxy catalyst before you mix the resin and catalyst together. The Catalyst is of thinner viscosity and give you a streak free color mix as will as give you a visual so you know that your catalyst and resin are fully mixed.

@inmyimage1081 10 месяцев назад

Thanks for the tip. Don’t know how much I’ll use epoxy but wanted to let you know that your comment was appreciated by someone.

@richardspencer742 Год назад

Domino tip - it appears youre using the tight setting all the time. For a project like this... as id suggest do one board all tight setting and on the mating board one do one domino MAYBE two on the tight setting and the rest on the loose setting. Makes closing the gap SUPER easy. Youre using dominos for vertical alignment so slop horizontally is no issue. Hope that helps and speeds someone up.

@robbyjefferson9532 Год назад

It’s finally here! Podcast listeners were starting to think this table was like Bigfoot or Nessie!😂

@michaelwillson6847 Год назад

Dont bring Nessie into this. She's there somewhere

@krisbabic89 Год назад

Lol! I’m watching before he pulls it down lol. I love that he says he used the domino so he could get the video out faster 😅

@Signaworks Год назад

No, it's still not here. This is just a blank video all the way through. Are you seeing visions?

@bobkilmer697 Год назад

It's unsettling how often you use the words "perfect" or "perfectly." In some cases, "adequately" is more accurate.

@APinTheAK 10 месяцев назад

Saw blade Perfectly straight yet binds. Hmm. Lol

@christophermulvihill5536 9 месяцев назад

Perhaps there is some kind of RU-vid adjectivegorythm which, if you don't 100% meet flawlessly, one might miss out on some super important monetization.

@crazyswissllamma 9 месяцев назад

It’s driving me nuts now

@golucent 9 месяцев назад

lol

@JB-fh1bb 8 месяцев назад

But “adequately” feels like accepting a compromise while “perfectly” feels more satisfying and dopaminergic.

@DKWalser Год назад

Pro tip: Hot melt glue releases with denatured alcohol. No putty knife necessary. Pro tip #2: When routing an edge profile on a table top, cut the end grain first. Any tearout from the cross grain cut will be removed when routing the profile on the long-grain edges.

@AlAmantea Год назад

You only need to raise the grain by water popping after your final grit. Also, after the water pop, I recommend you sand by hand in the grain direction LIGHTLY. Only sand enough to get back to a smooth surface. If you sand too deep, you will go through the raised grain and have to water pop the grain again. This step doesn't take too much sanding, usually a few passes by hand with a sanding block and 180 or 220 grit (whatever your final grit is) is plenty to knock back the grain. Further, this water popping and raising the grain is ONLY NECESSARY WITH A WATER BORNE FINISH. If you are using an oil/hard wax finish, or other oil based finish, raising the grain (water pop) is NOT needed.

@woodworkingandepoxy643 Год назад

Yes, exactly what he said. Best paragraph I've read on a video in days

@AlAmantea Год назад

@@woodworkingandepoxy643 thank you for your corroboration. I appreciate you!

@inmyimage1081 10 месяцев назад

Thanks for the tip about it only being necessary when using a water based finish.

@jmoery Год назад

"Perfectly" Imperfect

@unikornkontroller Год назад

I follow a ton of different work working channels. All have their strengths and weaknesses. I'm a new subscriber but I appreciate how thorough you are showing every step. At first I was like "a 45 minute video?"...and here I am 35 minutes in and learning new things.

@kentrichardson9070 Год назад

Woodworking for over 35 years and an oil finish and stains on rags do catch fire in the right conditions. We simply put them in a bucket of water. Nice project,cheers

@JasonPeltier Год назад

Protip: get a 6" sander. It has 43% more surface area which translates to 43% faster sanding.

@rlgunnells Год назад

Table and engagement - high five, congratulations!

@pirakoXX Год назад

When someone "over-explains" steps, and you think; "yeah, yeah, we get it, move on, move on", remember that when you later try to do the things yourself! Please record (with audio!) your first attempts to copy the SO EASY tasks, and let's hear the apology!! It's not embarrassing to be wrong or make mistakes, it's all about what you do afterward; and if you are "man enough" to admit it, correct your wrongdoings, and apologize!

@jasontraud8102 Год назад

If you know anyone with a resin printer, you can print a cap out of clear really easily to cover the other side of the router. You just need the OD and ID for the base and the height and width of the hole.

@terencemerritt Год назад

Man it was so nice to see a video that wasn’t a clickbait title. I had changed my subscription to only subscribing instead of ringing the bell to get notifications, but I am gonna give you the benefit of the doubt that you’re going to stay away from the clickbait nonsense. Lol. Also, you also only need to water pop before the final grit sanding. Multiple times water popping is multiple times of wasting your time. Just do it before final sand then hand sand, mainly with the grain

@21thTek 11 месяцев назад

having a festool inmersion circular saw and a domino joiner instead of having a good quality jointer aint the smartest decision ever ....

@TheEdsousa Год назад

Hi Eric, I needed 3 days to watch your video, because I have little time. But it was worth every second. incredible job. It's a pleasure to watch your work. Congratulations

@AgCWby90CS 11 месяцев назад

Claw hammer and a rubber mallet. Framer and cabinet maker. I use the rubber mallet in cabinet and furniture making to persuade a tight joint to close up completely.

@Chris_Smith_burner_account Год назад

Looks great brother! Glad to see you building for yourself. Congrats on your engagement!

@normstavin6290 Год назад

Just a note: a 3/4" melamine "carrier sled" is not necessarily a "jointing sled" as it can distort in reaction to pressure from feed rollers under plank especially on short bed portable planer. A jointing sled should be a torsion box that is rigid along length/ width. I have a '' fancy" one that I made which has integral screw shims( Italian piston cabinet levelers) activated from side in conjunction with high friction support cross bars at a number of locations. If you ever use a wide belt sander one can use it to flatten large slabs with extremely robust torsion box sled.

@joepangean6770 11 месяцев назад

Pro Tip #3: get some panel clamps, like from Rockler. They not only clamp the joints together but also the face is cull clamped with just one setup.

@jerrymckissen1617 8 месяцев назад

Thank you for reassuring those of us who are Not perfect that we too can make furniture that is awesome by learning and by practice can be proud of our efforts! One question: how are you able to use the circular saw slowly and not get a burn mark on such a hard wood? Sharp blade and all. Nice job

@krjones91 Год назад

I will have to personally disagree with wearing Crocs (or any soft shoe) in the workshop. I recently fractured a toe due to dropping a sheet of plywood on my toe when it slipped off the table where I was going to cut it down into the needed sizes for a project. As soon as I can wear normal shoes, I plan to invest in a comfortable pair of steel toed footwear. On the bright side, I'm thankful I didn't injure myself while using a spinning saw. Edit: Love the video too. I appreciate you making videos of making your projects, not just being a sponsored tool reviewer.

@SAUdustBuilds Год назад

I agree. No Crocs. I prefer flip flops myself

@krjones91 Год назад

@@SAUdustBuilds Well played. 🤣

@fuzzywigglebutt Год назад

Like I always say..."No project is complete until I am bleeding."

@Offshoreorganbuilder Год назад

Timber must be cheap, where you are. I certainly would not be allowing lumps of decent wood to fall to the floor like that!

@sterlinghein Год назад

Beauty. Love the domino jig for the aprons, and the tip for reversing the drill bit to prevent tear out.

@Erik_The_Viking Год назад

Dust extractors on routers are pretty much useless - I've tried everything on my end and no mater what I did, I always ended up with a ton of sawdust everywhere. Beautiful table! Well done.

@AaronGeller Год назад

My Festool 1400 router is amazing at catching dust. It captures around 90-95%

@Erik_The_Viking Год назад

@@AaronGeller Festool is known for dust collection so yeah no surprise there. My Bosch is so-so at best and you can forget about other brands.

@SandyMasquith Год назад

That's a beautiful table! Thank you for taking the time to make the video. The quality of the audio and video are superb. I love the soft music in the background, it definitely adds that little touch to the video experience. This design is in my top 3 for my dining table replacement. :)

@Tensquaremetreworkshop Год назад

A pass through your thicknesser makes the wood 'perfectly flat'? That is amazing! Getting even within a nanometre in engineering is regarded as very precise- and you have beaten that in your garage! And put biscuits in that are PERFECTLY aligned! And in a garage, not a thermally controlled laboratory, using precise machinery! Or are you just using words without care? Nothing is perfect. Everything has tolerances. Understanding that is important if you care about accuracy.

@iansampson1302 Год назад

I once painted my finish on the under side of my table top, and not the other side, and left it for 2 days. The top bowed upwards towards the unfinished side due to the absorption of moisture. It would be a good idea to keep the other side closed to prevent moisture absorption or finish both sides one after the other to prevent it.

@skyser9 Год назад

Congrats on the engagement! And great work. Thanks for the inspiration!

@Zepmeister13 Год назад

It's about time you popped the question to that awesome lady. Congrats, Eric and Miranda.

@mirandastewart8411 Год назад

I agree!! Thank you! 😀

@deliaguzman1138 Год назад

Boy, even the smallest glue-ups (a strip of 4” wide coasters, for instance) are SO hard to line up straight and flat! I can’t even imagine such a huge tabletop glue-up. Thanks for the thorough description, Eric.

@deliaguzman1138 Год назад

PS: Holy cow, that is one gorgeous finish!

@firstcapitalwoodworks9197 Год назад

The trick with the domino jointer for the stretcher pieces to the legs was genius. I go a doweling jointer and will definitely have to remember that

@skiersailorbikerguy8546 Год назад

Regarding your curiosity aired on the podcast - 9 sets of ads. Survived! Nice vid Eric, and nice table. Glad it finally saw the light of day!

@a9ball1 Год назад

You have your sled backwards. The edge board should be in the front of the sled. If in doubt try this. Put a sheet of wax paper between the board and the sled. Run through planer and you will see the board move from the sled, pushing towards the front. The rollers are what keeps the board from moving while the blades cut but the rollers are pushing forward. I didn't believe it until I tried the wax paper trick.

@madspenril3638 Год назад

Great job on the table and congratulations on the engagement.

@TheWardagh Год назад

Great work 👏🏼

@cabman86 Год назад

As for the oily rags, I keep a 5 gallon bucket half full of water to put them in.

@kevinberta8741 9 месяцев назад

Should have glued two and two. Then on the final gluing, put the one in the middle and glue it all together. Would have been easier IMO.

@TheOhgMg Год назад

How were you able to finish the underside only and not have the table top warp?

@tc9148 10 месяцев назад

Fabulous video and craftsmanship. In the video, you mentioned drawing/plan for the angle glue up clamping jig. I looked and looked and could not find it. Where can I find the plan for that jug?

@Bonnie-li9dh 8 месяцев назад

Butter. I love your cat... I mean your "date". That was funny. Oh, and the nightstand was nice too. 😊

@YoutubeAccountMan Год назад

You have WAY too many clamps. Number of clamps actually goes DOWN with the width of the piece. If you did glue all 5, you could've used 4 clamps total to get the same pressure.

@samstone2007 Год назад

You say alternate the clamps but don’t both sides apply equal pressure? Not sure how they wouldn’t.

@gulzeb Год назад

There is slight bowing in the bars. Alternating the clamps orientation minimizes that effect.

@ericfrieling9530 Год назад

I absolutely love your videos. I’d watch an hour long video just about sanding if you posted. You have many great tips I appreciate. I hate your video titles. I skip most of your videos due to the title. I love the tip with the maroon sanding pad. I hope your titles make money for you.

@NirvanaWoodWorksbyJanie Год назад

This table looks like a combo of The Wood Whispers Mid-Century Modern Table & his latest Criss-Cross Table. Definitely see the inspiration from both

@MichaelViewing Год назад

Very smexy. One pro tip, you only need to water pop before your final sanding grit. I’ve tried multiple pops like this vs the single and the result is the exact same. Jennie and Davis also have a great vid about it as well.

@TreeOfLifeWoodworking Год назад

you are 100% right. water popping every grit does literally.. nothing... except waste time lol

@Mike-dy8bq 11 месяцев назад

Safety Note: If you are concerned about your track moving while sawing, I would recommend using the track saw clamps to hold it down vs your right hand. If the saw kicks back, your hand is in the line of fire.

@jmoery Год назад

Using rubbing alcohol to get off the hot glue. Breaks it down super fast. Easy peasy

@pachting Год назад

Nice! I like your video's. Keep going!

@ethanday8107 Год назад

Almendinger saw will is the best!

@chriswilliams9525 Год назад

That is a great looking table. Walnut never fails to deliver and your design is makes great use of the wood. I am in the middle of a large, 8/4 walnut desk project. No dominos, but I did use dowels and had great success with them. I am curious if you considered adding c channel to prevent warping or cupping.

@coreydavoll7622 Год назад

Great job! That looks so good!!!

@SpencleyDesignCo Год назад

thanks dude! I told you I wasn't lying about having the table :)

@dougwing6326 11 месяцев назад

I use and ad blocker. Google now wants me to pay $13 a month to avoid the ads. I *HATE* ads. So... If I pay for premium do you receive a kickback? I am willing to pay the fee as long as you see something from it. If not I am off to Rumble to see what is there.

@riptiz Год назад

Reversing the drill on wood or steel will also centre the drill more accurately.

@snekmeseht 9 месяцев назад

Buy yourself a 1/4 sheet finishing sander and dedicate it to your Scotch-Brite.

@skiersailorbikerguy8546 Год назад

“I used the domino to make it quicker, so I can get the video out” yeah sure Eric… queue SpongeBob “1 eternity later”

@samroman1226 Год назад

Mannnn never watching your videos at night 😱 😅

@speedyturtle1991 Год назад

We use metric in Canada which is also in North America.. lol

@mikewhittington3451 Год назад

Excellent work!!! What a gorgeous table!!

@markglabinski526 Год назад

Beautiful!! Thanks for all you do.

@scrotiemcboogerballs4967 Год назад

You're brave finishing one side of the table and not the other, then leaving it. It can easily cause bowing.

@ig1988ig1988 10 месяцев назад

you mean he should finish both sides same time, and that can prevent bowing?

@scrotiemcboogerballs4967 10 месяцев назад

@@ig1988ig1988 if you put finish on one side it can bow overnight. You need to seal both sides. Wood can always bow long term, this is just a short term risk.

@kennmacintosh2627 Год назад

There's a simple way to get rid of all those router chips on ur floor.. Open ur garage door and grab ur leaf blower.

@AaronGeller Год назад

His landlord probably wouldn’t appreciate it since he’s at an apartment complex

@craighhg Год назад

Finally it’s here! Great work man!

@SpencleyDesignCo Год назад

hope you enjoy it! shes a long one!

@craighhg Год назад

Who needs to work. This is more important!

@officialtree5245 Год назад

THANK YOU SO MUCH FOR THE TIPS!!!!!! whenever i wondered about finishing i could not figure out what the squeegee was. also thx for responding to my email!

@billsimonsen2746 10 месяцев назад

Good tips!

@tomnielsen3661 Год назад

Beautiful table and great video! Yes it was a long one but it showed all of the steps.

@timwilligar2525 9 месяцев назад

That's really nice, buddy!

@ChrisHornberger Год назад

It has always cracked me up how much seemingly perverse pleasure in not having a jointer, yet you have a domino and festool track saw :) Not sure it’s your smartest money, given how often you seem to lament not having a jointer. FWIW, I have the 8” Wen with like a 38” table and it rocks, even for longer stuff. Food for thought. :) Enjoy the vids; don’t take this as criticism.’

@BenWelcome-e2t Год назад

I am really enjoying your videos! I appreciate the way you show how certain steps can be done in multiple ways! Congrats on your engagement!

@dfinma Год назад

12:06 Perhaps try scoring the exit side of the crosscut in order to cut the fibers to prevent the tearout? (maybe?) And/or put backing material on before cutting? I'm thowing hail Marys here... 😄

@turningwiththewoods Год назад

Congratulations on getting engaged. Use the table in good health to share meals with each other and family and friends.

@amedford99 Год назад

Bruh I was watching this before bed and that jump scare is keeping me awake 😭😭😂

@horatiobeaker Год назад

Awesome job and design. Well presented.

@riff1forme 8 месяцев назад

That’s got to be heavy as heck!

@deskbreaker Год назад

my problem with the jigsaw is the cut always has very high angularity, much worse than what i see here tbh.. the top looks ok but underneath the blade just walks all over.

@chucknowakowski6676 11 месяцев назад

Funny thing, for the price of all those clamps, probably buy a table…..😀

@bradh74 Год назад

Sharp looking table! It looks a little delicate though. How strong is it? Strong enough to stand on? It looks great though.

@johnvanderhoof1248 Год назад

Nice job. I made a farm table a couple of years ago, so I know how much goes into this. Thanks again good work with the video as well. Much time had to go into this; we all appreciate the effort.

@jimrosson6702 Год назад

Turned out beautiful great work

@MrEdtobias 11 месяцев назад

Love the video. Do you have a link for the scotchbrite pads you used? For some reason I’m having a hard time finding them

@johnirving4906 Год назад

Very well done. I always want to build more stuff after I watch your videos. BTW, not all of North America uses imperial measurements. Only America does, the rest of North America uses Metric.

@africantribune Год назад

Poor safety practices

@thedelawarevalleyworkshop Год назад

Nice Job. That is a really nice table. Congrats on the engagement!

@MWAWoodworks Год назад

Dude EPIC table build! Also like the rhinegeist shirt 😀 🍺

@rklauco Год назад

Don't peel off the hot glue with chizzle - just spray it lightly with isopropyl alcohol, wait few seconds and voila - it will just peel off.

@WoodcraftBySuman Год назад

Hey, that's not a triangle! Looks more like a standard distribution curve

@SAUdustBuilds Год назад

Another word for it is parabola

@bradstooks6181 Год назад

Very nice table! Great video

@jamescollier2049 Год назад

The jump scare got me

@williamdanaher2574 Год назад

Pasta wax? Genius.

@thenext9537 Год назад

I just finished an 8/4 walnut table. I did it in 3 steps for the glue up. 2x6” boards glued up, another set glued up. Then the middle piece, a very highly figured walnut board that’s 11” wide (yes, 11 inches). I glued that to one set, then the other set. Took 3 days but it’s straight. Also, no dominos or dowels anywhere. I’m sure it makes life easier, but just some cauls across worked fine - really helps doing it in sections. The starbond stuff yea, i learned a lesson - pre seal all holes. Bubbles will happen and it sucks. I had to redo it a couple times, made me mad. For rubio - MONOCOAT is a damn lie!!!!!!!!! If you are using some straight grained walnut, maybe. My boards had a lot of of figure and crotch and end grain sections. It just soaks it up! I had to do THREE coats. I'd put it on, leave it for 5 minutes to soak, push it around, let it soak. Let dry one day. Maroon pad from 3m (the best way, they recommend as well on bottom of sander), wipe off with a fiber towel (no spirits) and rub in next coat. Rinse and repeat. 175$ later it looks great but monocoat my ass.

@chidrummer1 Год назад

As always Eric, awesome video and I respect how you show different options to make cuts and join pieces. However only negative point, burn that Blue Jackets shirt. Haha. Well done brother.

@59chris1 Год назад

Love the Scottish anthem with the sponsor bit.👍

@vakeli 7 месяцев назад

great job, man, as always! just curious, how big is your workshop/garage in sq ft? from the look of it i think i have about the same space and wondering how i can organize it to be able to do similar projects (scale-wise) with only having must-have tools not to clog up the entire space. thanks!

@chrisbeam9342 Год назад

What marking pen are you using

@steelsunpi Год назад

Not seeing the Vesting listed in the description And your link to it on your site goes to a different product (chimiver led oil)

@billdiehl156 Год назад

Great project!! I was counting the times you said “super” but quit when you went over 364. 😂 Super!

@warrensmith2902 Год назад

Great video. One suggestion, get the dust shroud for you plunge base on your router. Most plunge bases have a top dust collection adapter. For free hand round over bits, collection on top and the bottom will always be a problem.

@fauxnom2945 Год назад

Question: Were your figure eight attachments set up to accommodate width movement over length movement? It looks to me they should have been on the side rails to protect from lengthwise (with the grain) expansion over width wise (against the grain) expansion. Please explain the rationale. Thanks!