I FOUND RUST! Custom Firewall, Rust Repair, Rear Tunnel & MORE! 1930 FORD MODEL A! 

Congrats to Slick and Mrs Slick and especially new Baby Slick!

Congrats to Slick and Mrs Slick! Glad all are well. 🎉

I didn’t think this channel could get much better after the wagon build and the short wide . This new build is off the hook !!! Internet can piss up a rope this hot rod is gonna be sick !

I'm glad you upset the internet. Most of the internet sucks 😂😂😂

Puddin is becoming a mighty fine sheet metal man these days. Sleeperdude would be proud of those repairs. 😮

Awesome it’s that time. I’ve been in the hospital now for 8 days now so awesome I brought my iPad and can watch my fav Puddin.

I don't care what anyone says about Bill. he knows his shit and dang fun to hang with.

Yeah Bill, that’s right four bong hits and let her fly 😌☺️😌

Ole' Bills Rust Repair "4 Bong hits an let 'er fly." -Wild Bill 2024 hahaha

Congratulations to Slick & his better half! Really enjoying this build series. Thanks for sharing!

For as much as you don't like sheet metal work, I sure do like seeing the way you do it. And I really appreciate all the time you take to explain bits about it. I sure wish the guy who built my 31 would have watched this before making its floors.

Sheetmetal work like that is becoming a lost art with all the modern glues, seam seals, and re-pop parts on the market. Appreciate the old school approach!!

SLICK IS DEFINATLY [THE] METAL MAGICIAN. FANTASTIC RESULTS....👍👍👍👍

Time for some Puddin' and Model A action! Best part of Monday!!

I am learning a lot from you Puddin. Don’t apologize for teaching us !

Mr. Puddin Monday. The best part of my week.

I am on the edge of my seat watching the model A. As far as upsetting the internet, it's good for them, builds character. IMHO you bought it, you should be able to build it however you want. I'll be entertained no matter how you build it. (By the way, I wouldn't change a thing with your build.) An awesome build of an awesome car by an awesome dude.

You have to admire anyone who can shape sheet metal, great job Slick that’s a real skill 👍🇦🇺🦘 I loved the look on slicks face when you were having a go puddin, it was priceless 😂

That Slick is just a damned genius. And so are you Puddin' Tang. You say sheet metal work is boring, but I don't agree. I love to watch how you figure things.

Brother for someone that hates doing sheet metal work you did fantastic!!! I could watch ya do more sheet metallin anytime. I like to watch your thought process. Thanks for sharing your talents and adventures!!!

Puddin does want Puddin wants too!! You make the car your own! Always enjoy any content provided.

I'm very impressed with your dedication to having a perfectly rust free vehicle. Most people only talk the talk but you're showing them how to talk the talk and also walk the walk. Awesome Sir

Love the content, "quit telling people your not a metal guy" the stuff I've seen you make is amazing. Watching your videos inspired me to dust of my project that has been sitting in storage for 15 years. Thank you for the content, congrats slick 50 on the newborn.

So great to see you making this Furd better. Congratulations to Slick 50 and family.

I don't care what your doing, I watch every week. The only one I watch other than Duffs show.

Managed an Oreilly's for 10 years. Used to have to attend the Concours De Elegance in Clear Lake Texas. All the "Prestige" cars were in attendance. If you scratched their bellies, most of the points cars had inner panel rust. Found a beautiful 55 Buick 2 dr , awesome copper colored paint job, and excellant interior. A post was so rusty......

Love it when bill and slick are in the videos ! Keep up the good work lads

It is coming along very nicely. Keep it steady, and move along at the pace you feel is right.

Ole slick 50 nice shop, some cool projects going on, love his tools, and quite the Craftsman

Ol’Slick is pretty awesome with that metal 🇺🇸

Best Project yet. The haters can pound sand.

Model A is coming right along and looking GREAT! You say you are not a sheet metal guy but your work looks damn good. Congrats to Slick and his Bride on their new baby.

I found a pair of Eye muffs from Ian Russel in Arizona. They are made in Australia constructed with eye protection and ear muffs as one unit, they may be the ones to use

Sheet metal guys are awesome. Litterally sculpters. It basically looks like garbage then poof its beautiful. And they can see the end product from flat sheet all the way through. Pure art.

You’re not bad at sheet metal work. You’re not fast because you dislike it and don’t do it often. End of the job always turns out really nice.

Another great episode this evening. Glad you enjoyed the "Taco Boy" Burrito. My wife and I put on your account on our way back from the Starbird car show in Tulsa. Everyone should drop by Taco Boy if they get a chance they are great people. Keep up the good work.

He is actually adding value to the vehicle. Especially when getting rid of the rust. When he is done, I believe it will far more valuable and will be around another 100 years.

Man I dont know but something about this particular episode, with you and Slick and Bill all together in the new shop working across all the sheetmetal tools. Really made me appreciate the new space and all the working room you have now, just reminiscing about the old days of having to rig an old cab to roll it around to make room to reach the scrap metal, getting worked up hotter than a two pecker tom cat.

If you flip the whole firewall it makes everything fit pretty good

So happy to hear about little, Slick Penny, congrats Slick Fiddy and family

I like it when Slick shows up, learn from a real sheet metal guy.

“Four bong hits and let her fly”. That explains seeing Bill at the FireLake bakery section zoning in and out around the pastry the other day. I was going to go fanboy on him but realized he was having a moment. Knew I liked that guy. Great video and really cool project.

Puddin you need to go to the junk yard and get a patina van, air bag it and call it the Dirty Van Special!!!!

Fun having slick 50 in your videos. I did not know he was so talented. He gives me a lot more respect for him. To Puddin, love watching your content. I'm 71 years old and I wish I could do what you do. I have worked on my first car "1960 Dodge" out of necessity. Love to your family. Hope Hotrod is feeling better. You need to have a million subscribers. Watching yo brightens my day. Thank you.

The next tool other than that sander is a nice metal bandsaw. I love using it whenever possible. Saves blades and grinding dust. Keep chopping I’m digging the model A. Toss in a small block ford and that distributor will fit perfect!

Puddin and Slick 50 are a couple of master craftsmen. I love watching them fabricating panels and whatever. Best part of Mondays for sure.

Go ahead slick fifty show the people that you skill bring in the game. Really nice work Sir.

Slicks powerhammer is a good candidate for some spraypaint and pinstripe action 😎

Puddin needs to sell Cry Pillows and beanbag chairs.

20:03 just imagine how much easier a 302 Windsor would have been , but ya roont’t with a Chevy 🤣🤣🇦🇺🤙🏼 love it

Love the bug eyed safety glasses they rock

There's times you sound like Mr Haney in a good way. The wife and I love Green Acres. Tom in Idaho

Congrats to Slick and the Missus on the new addition. Thankee Puddin and family, and Bill of course for the content. You all make the days go by smoother.

It’s gettin’ purdy

As frustrating as finding more rust than you thought you would, can you imagine all the rust repair you would have had to do to the other Model A you were originally going to use? You're doing GREAT Puddin'. Proud of Ya!

As an old industrial insulater/sheet metal mechanic, I just enjoyed the heck out of this episode. That you grind your teeth, as if Roloc powered, just makes this FUN. "If it was Easy, Everyone would do it" so there'd be no fascination for you to have a popular RU-vid channel, no new shop for you, and no new house for mama!!!

FYI for seam sealer most seam sealers if you have a rubber glove on and a small cup of lacquer thinner, apply the seam sealer and then rub your finger to smooth it out if you want you can outline it in masking tape or smooth it out that it will look "molded in" with the thinner hope it helps

It’s great you’re fixing those places. You’ll be much happier in the long run. If it was easy everyone would do it.

Hey Puddin, just remember that I don't think primer is really intended as a rust preventative. I think maybe it would be ideal to paint over that primer with even some cheap top coat when you are doing your sheet metal repairs. Love your channel!

Puddin it definitely would be cool if you & Mortske did a T shirt collaboration ! Maybe Puddins on the front Mortske on the back ? Or vice a versa. congratulations slick !

Acid brushes week great spreading seam sealer. Also if you want to shrink the center of a panel that has spring to it like the floor pan, take a torch and heat a dot red hot then with a blow gun make circles starting from the center out. If you have a stud welder for pulling dents you can use that without the stud to heat the panel.

You always apologize for not being a sheet metal guy... buddy, you do a pretty good job... Slick may be the sheet metal specialist,but I do enjoy watching the product yall put out... thanks for sharing

Dag Nab It!!! We should be able to like the videos more than once..... Here lately I've been really enjoying the videos. It makes my day. Thank you!

To be honest I like sheet metal work when somebody knows what he doing and I'm all for it's soothing and satisfying, and about upsetting the internet? oh boy I love when someone gets piss off for non of his business ,keep the good work brother 👏

I'm a purists at heart, and I know some wont approve, however the craftsmanship in this is absolutely amazing. What a beautiful work of art! very well done sir! I love it!

Every time you say you’re “not a sheet metal guy” you look more and more like a professional Sheet metal guy. Love the videos. Can’t wait till my Puddins hoodie gets here! Keep em coming buddy!!

Another great week!! God bless you guys and the wonderful Puddini

Great video, can't wait to see more progress on the model A. Happy to see you working on your dream car. Thanks for sharing and God bless.

Slick is pretty slick on his knowledge of sheet metal work. I noticed quite a few times he looked like he wanted to snatch it out of your hands and do it himself. 😅Great job guys.

Throw some more time-lapse when you do the boring stuff as you call it ! Keep up the wonderful work! Always a pleasure

That orange and white short bed looks good!!

I can't help but laugh at how even though puddin has an area now meant for working with metal bending, cutting, shaping, and more... he still works on the floor and his rolling cart. never change Puddin, just keep firing from the hip.

Thank you Sir. It ain't Monday till Puddins in the house. ❤

What a fantastic job you are doing Jacob. Loving this series. You are sure lucky to have Slick as a buddy.

Congratulations to Slick! Be careful with sparks going into the old seat. They can smolder then catch fire.

"Be patient, be persistent" - good advice for all phases of life!

I'm watching PUDDIN work his magic as I'm painting the 07 ford E-450 cab and chassis frame, rear end, springs and more with a 4" foam roller and a paint brush using rustoleum oil base paint... Yup, it's good enough for me and saved myself $4,000... It's good enough for me... It's a work truck...

“Like something Mortske built”🤣🤣 holy hell that made me laugh way too loud!!

Great work and demonstration on firewall.

All i can say is id much rather see a classic car hot rodded being driven than sat in a museum stock being forgotten about 👍 keep up the hard work, its going to be one hell of a car when its done!

Slick is THE COOLEST !! Congratulations to Slick and his family!!

Great video, I like fabrication videos. Congrats to the Slick 50 family and baby. Morske did a "Can I kept it running" video this week. The answer was NO!

Loving the build metal work and all, glad you broke the internet. Congratulations to Slick and family. wish him the best with the little one.

It's starting to come together pudding

I personally enjoy seeing and learning the details you show

Puddin it’s definitely coming together quite nicely buddy!!! Definitely looking good for sure!!! I definitely can’t wait to see what it will look like when all finished up!!! Remember keep up all the hard work buddy!!!!

Been a silent viewer for 2 years now. Love the videos and attitude. I'm a UK Veteran of 25 years Service and find a huge amount of therapy in Puddin's videos on both channels. Would love a PFS T shirt but you won't ship outside the US of A. Shame because I've stood side by side in Afghanistan with the USMC and faced the same bullets as them on certain days. Would be proud to wear a PFS shirt this side of the Pond.

Great having a guy like Bill around.

The Model A coming alone. I'm glade you are keeping the fenders. So many Highboys out there.

Im here for this build. Best build happening on RU-vid right now!!!

Again, gotcha! That Deuce will be something! plus need to mention that mechanical (sheet)metal shaping is an lost art in germany, unfortunately. Slick's doing his thing, nice to see, that this is still feeding a family over there. Greets

I love watching sheet metal work! Rust repair & beadroller action!

The molecules in that metal are screaming Puddin!!

The model a is looking really good, but you’re killing it on the sheet metal work. It’s not much fun doing bodywork,but it’s worth taking the time to make sure it’s right. Keep up the great work and congratulations to slick and his family.

I like the way you both use your different skills together

Loved it mate, it just gets better! Congratulations Slick on your bundle of joy 😃

For a guy that does not like to do sheet metal work. Sure. Seems like you're doing a hell of a good job. When you're done with this job, you'll be an Ace. Keep up the good work Buddy!

That color match bed liner is a great idea. Will save future problems from happening

I have been a bit skeptical of old Slick 50 in the past. However, after seeing him (and yourself) make that firewall piece makes me realize that he knows a lot more than I gave him credit for. Great work you 2 That is something we ALL wish we could do. I dabble here and there, but nothing on this level. Cheers

Puddin make yourself a table for your bead roller. Would be a great 2nd channel video!