These are the cutest. I have two of them and i'm working on a testing video including all types of scoobas and braavas (aside from m6) Also i kinda know german so i translated the quick start guide for you: iRobot Scooba 200 series quick start guide Scooba was developed for use on hard floors. this includes tiles, linoleum, pvc, marble, slate and sealed wooden floors. Do not use scooba on unpainted or unsealed hard floors, stone floors, carpets, runners or waxed floors Step 1: charge scooba 1. Insert scooba battery. To function correctly, the scooba must be closed in a watertight manner. To ensure that Scooba is tightly closed, the battery must be fully inserted. Please refer to the illustrations. Press firmly when inserting the Scoobas battery, as there is very little difference between flush and non-flush 2. Charge scooba overnight before using it for the first time. the light on the charger will flash during the charging process and light up constantly green as soon as the battery is fully charged Note: if the battery is not fully inserted, turn the scooba over so that the battery is on a hard surface. Push on the front bumper. Turn Scooba over again. Use your finger to check whether the battery is flush with the robot. Note: in order to extend the life of the battery, scooba should always be connected to the charger connected to the outlet when it is idle. Step 2: prepare the room 1. Remove unnecessary objects and runners from the room to be cleaned 2. Sweep the floor or use Roomba Step 3: Scooba set-up 1. Open both the filling and emptying openings. Slowly pour warm water into the FILL filling opening. 2. Add scooba hard floor cleaner (either a portioned pack or half a cap) 3. Close the filling opening (FILL) and the emptying opening tightly. 4. Place Scooba in the middle of the dirtiest area on the floor. 5. Press the POWER button to turn the scooba on. 6. For the short cycle, press and hold the clean button until the second song begins. (20 minutes, up to 14 m2) For the long cycle, press clean only once (45 minutes, up to 6m2) (I think there is a mistake and the square meters have been swapped) Note: only use iRobot Scooba cleaning fluid for hard floors or pure tap water with the Scooba, other fluids can damage Scooba Step 4. Cleaning scooba 1. Remove and rinse both the filling and emptying openings thoroughly with water after each use 2. Remove the bottom plate, spool and remove debris from the brushes and scraper 3. Remove any dirt from the robot before inserting the base plate. Note: To protect the brushes on the base plate, Scooba should be placed on a storage mat.
@@robovaccollector I have two so i'm thinking to customise one and leave the better looking one as-is. There is no way to take them apart however, so repainting is out of the game. I'm experimenting with car wrap foil so maybe this will do.
A lot :D It is not new, it is just in great condition. I actually have 2 boxes now, cuz I got another one for my friend, for 5€, seller says it can't charge, but it works just fine. I'll get Combo as soon as it will be somewhere used for good price, same with s9, and h1, but I don't really need h1, because I have Jimmy, and Jimmy is also handheld and stick vac. But as a new piece to my collection, I'll sometimes get one.
