I'm Ditching Blender for Onshape

Подписаться 119 тыс.

Просмотров 395 тыс.

50% 1

In this video, I share with you what I think is the best 3D design software for 3D printing. This video is brought to you by Onshape. Check them out at onshape.pro/nextlayer
You've probably heard 3D printing content creators like myself say it before, and it's worth saying again: If you're not designing your own custom parts to solve your unique problems, then you're only getting a fraction of the benefit out of your 3D printer. But where to begin?
In this video I'm going to compare and contrast two of the major free options available to makers, share which one I use for what, and explain why you might want to do the same.
Whether you're just starting out with 3d design and cad modeling, or you already know how to use a parametric design software and design your own STLs for 3d printing, this video will explain which program I use for what, and why you, too, might want to consider checking those apps out.
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: / thenextlayer
🎥 IN THIS VIDEO: 🎥
00:00 Introduction to 3D design software
01:35 Mesh Modeling: Blender
03:45 Parametric CAD software: Onshape
08:29 Which One Should You Use for 3D Printing?
11:07 Conclusion
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
🔗 OTHER LINKS 🔗
👉 Blender: www.blender.org/
👉 Check out the Onshape tutorials by Michael Laws of Teaching Tech: • Selecting a free 3D CA...
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

Наука

Опубликовано:

7 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@thenextlayer Год назад

Thanks for watching! Let me know if you liked the video, disagreed, agreed...? I love your comments.

@ScarletwingRuri Год назад

To be honest, You can't ditch something that is free. For CAD modeling, it primarily revolves around having the knowledge to use the appropriate tools effectively. If the user understands how to create what they need, even software like SketchUp can suffice. CAD becomes unnecessary when the desired outcome doesn't demand intricate engineering.

@sermonesyhomiliascatolicas6640 Год назад

From one point of view, I wold prefer not to use OnShape BECAUSE its not a software that I could INSTALL on *MY* pc... _its a SERVICE that could exist or not tomorrow... and you have no control over it_ its not a thing that YOU 'HAVE' , but a "favor" that they GRANT to you for a moment

@alexandremarhic5526 Год назад

Fusion360 do like onshape at the beginning, a free licence for hobbyst, then they limit your assembly.... If you want parametric you can stay on Blender with modifier or geometry node. The only part is bad with Blender is the fact you can not select face, edge or point after a modifier. Freecad is the best option if you want CAD always free. Morehover simulation is free in Blender ;)

@nikthefix8918 Год назад

@@ScarletwingRuri I think anyone interested in industrial design should get comfortable with parametric. If you regularly use FDM printing for making brackets, enclosures and other mechanical substructures then struggling with mesh is probably counterproductive in the long run. Creating variations of an existing design - scaling, wall thickness, changing the radius of a rounded corner, adding holes etc is a breeze. It's really the global parametric changes that make it a joy to design with IMO. And if and when you find yourself backed into a corner with a desired geometry the software can't resolve because you've unwittingly created a geometrical paradox (always pilot error) you can, in the case of Fusion 360, Inventor, Solidworks (I don't know OnShape) resort to the built in mesh tools / patch tools / surface tools to inject a bit of Blender style fudge to 'fix it in the mix'. Personal licence Fusion 360 users (and Fusion 360 is popular for very good reasons - amazing interface and interop etc) are at the mercy of Autodesk and their willingness to give and take away features, but at the time of writing it's very good. I'll give OnShape a try tho - just so I can claim not to be a total Autodesk / Dassault fan boy.

@ScarletwingRuri Год назад

@@nikthefix8918 I am proficient in using ZBrush, Blender, Rhino, CAD, and SOLIDWORKS. Additionally, I have experience handling industrial custom projects. What I mean to say is that there is no need to abandon one tool for the sake of another. Each tool has its own strengths and weaknesses, and it's up to the user to know how to utilize them effectively.

@doodleslice Год назад

OnShape is great, but it is important to know that if you want to own the rights to your creations, or use them commercially, then you have to bump up to at least the standard plan which was $1500 annually at last look. On their free plan all models are public and it specifies non-commercial use only. Definitely a great tool but those things can be deal breakers depending on your budget and project needs.

@johnnyheightsplus8744 11 месяцев назад

Wow that’s very discouraging

@1bliss3 10 месяцев назад

This right here is why OnShape is a big PASS for me.

@LiveseyMD 10 месяцев назад

This is a really great point. The only thing that I want to add to it is that everything commercial requires you to invest your money (good IDEs cost huge amount of money). I did some modeling in FreeCAD and I have to say it may be really painful to do some things that are much easier in OnShape. So, if you use it as a hobby, it's a great choice.

@tamgaming9861 10 месяцев назад

Absolute right - so this comparison is totally bullshit. Because the one is totally free and private. And the other is not private if it's free. This alone disqualifies this video.

@CobraFat2000 9 месяцев назад

Being browser based kind of also hinted there probably being some additional "but" in it being "free".

@MostlyHarmlessEDC Год назад

FYI, there is a 3D printing add-on for Blender that helps find and fix non-manifold geometry. I have really only just gotten started with blender, but it seems to work pretty well so far. I agree that it makes sense to learn blender along with a proper CAD program though. As you said, they're fundamentally different tools that serve different purposes.

@SUBtrauma Год назад

Right? I'm predominantly a solidworks user, but that's for printing and mechanical design.. I use blender for art and organic design. Sometimes 3d printing things. But knowing many programs opens a ton of doors. Blender got me into 3d work, now I'm a designer for an international company, and I design testing systems for any and all ground vehicles.

@Lumpappsofficial Год назад

In edit mode, deselect all, go to menu select -> select all by trade -> non manifold. No plugin needed.

@giovannimontagnana6262 Год назад

@@Lumpappsofficial plus there are thousands of way to merge vertices close to each others

@jmalmsten Год назад

I would also add that you can usually model those precise parametric models, then export and use them in programs such as Blender to get the best of both worlds. :)

@glowpon3 11 месяцев назад

@@Lumpappsofficial How did I miss this? I've been using the plugin for ages. Select by trait just keeps getting better. Note: you have to be in vertex select mode for the option to pop up I think.

@MrBrigadierArchived Год назад

I'm actually not an 3D printing guy (at least for now), but I would say the Blender add-on mentioned is "CAD Sketcher" which really helped me to make correct house plan and keep it usable both for 2D and 3D view.

@thenextlayer Год назад

Thanks for sharing

@cerebralvision Год назад

My problem with Onshape is privacy. With blender or fusion360 you can keep the stuff you design private.

@janneliiti8898 Год назад

Exactly 😅

@EnchiladaBro 11 месяцев назад

Oh wow.. that's an absolute deal breaker for me, and should be for any maker out there! Sheesh.

@skipdraco4501 11 месяцев назад

1500$ a year to keep my designs private I’ll pass. Pretty sure there’s enough addons for blender to make up for anything I’ll ever need.

@skilledcamman4752 11 месяцев назад

what do you wanna hide bro

@skilledcamman4752 11 месяцев назад

@@skipdraco4501 you can get for free

@thedabblingwarlock Год назад

Just wanted to point out that there are non-destructive workflows for Blender. Chipp Walters is one of the guys that's worked on this. I think his Nitrox 3d workflow is meant to be used with vanilla blender. There are also plugins that help with this, like Meshmachine (though that plugin does a lot more than just non-destructive workgflows.) Blender is more of a 3d modeling, animation, and video toolbox than it is just a 3d animation software. You can use it to make models, animate models, composite video, edit video, do 2d animation with the grease pencil, sculpting (like with zbrush,) and even some parametric modeling with plugins like Cad Sketcher. While it's been a while since I've checked, it also had NURBS and metaballs which are not strictly mesh modeling features. NURBS are more akin to the models that parametric CAD software puts out. Metaballs were, as far as I can tell, a way to generate organic shapes that were then refined by sculpting. There's a lot to Blender, but at the end of the day, what software you use is up to your preferences and what you need out of it. Blender is a great option for making things that don't need a lot of precision or are more organic, even if you can use it to make precision mesh models. CAD, specifically parametric CAD, is great if you do need precision and the ability to iterate. Just my two cents.

@FictionCautious Год назад

He made a promo video for Onshape. Not about capabilities or possibilities.

@thedabblingwarlock Год назад

@@FictionCautious Your point being? As I said, I was pointing out features and capabilities in Blender that he may not have mentioned or known about. I've used OnShape and it's a pretty good tool. Them sponsoring him doesn't change that or the reasons he might have for switching, though it probably adds a financial one.

@bruhnah4life Год назад

Yeah even before 2.8, blender have game engine

@thedabblingwarlock Год назад

@@bruhnah4life Forgot about that. Thanks for the reminder. 😁

@darrennew8211 Год назад

@@bruhnah4life That's apparently coming back via someone else. Default Cube just had a video about it that I didn't watch past the intro.

@felineboy Год назад

Blender and Onshape serve different purposes and excel in their respective domains. However, if you're seeking a middle ground, consider exploring Plasticity as an alternative option.

@brucoder Год назад

I started with Fusion and then jumped to FreeCAD. A lot of the Fusion workflow translated to FreeCAD (plus, I've had real mechanical engineering and design training so I already had a basic knowledge of the general workflow). Since I spend 3/4 of my computing life in Linux, using FreeCAD on my Linux platform without resorting to a VM was another plus. Aside from decorative minis just because, the bulk of my work is in the design and testing of engineered mechanical parts. FreeCAD gives me the power to handle even the most complex assembly that I need to create.

@GaryParris 9 месяцев назад

Freecad & Blender best of both worlds

@redheadsg1 7 месяцев назад

"A lot of the Fusion workflow translated to FreeCAD" ... then why the hell i have so many problems to get used to FreeCAD ??? I just cannot handle how UI is so bad, so many unnecessary buttons, FreeCAD is way more constricted and so on.

@Paulklampeeps 25 дней назад

@@redheadsg1 i wish they declutter the ui of both freecad and blender.

@GlennBrockett Год назад

Great video. I started using OnShape about a month ago and love the work flow. Still learning the advanced stuff like assemblies.

@chillonfunsmart4929 5 месяцев назад

Open source software is always going to have the longevity factor and not come with licensing issues. Some software is going to have new features that make them stand out, but eventually the open source software will also implement those features and just be better.

@felipetomaz1087 3 месяца назад

facts. the whole industry turned to Blender over time for a reason

@az3dip Год назад

I started using Blender years ago before I got into 3d printing. And for me personally, this is still the best program, with huge modeling capabilities. But there are few lessons for 3D printing. And at the level at which I use it, I did not find it at all. The biggest problem so far for me in modeling is rounding and chamfering, but mostly this is because I often model non-destructively. And I made the technical details. And unlike cad programs, I easily combine technical elements with artistic ones. It helps me a lot at work.

@Joshplv Год назад

I personally prefer Bleder bc how fast I can setup a rough draft if its a slightly complicated part. I can usually have a complete idea of a model in around 30 minutes, this saves time when making the actual part in CAD

@martinsvensson6884 Год назад

If you're going to make pure functional creations then a CAD program is superior. For artistic purpuses though not so much.

@robfrydryck127 Год назад

@@martinsvensson6884 So agree. This is just a comerical for onshape without any real examples of either to back up the claims..

@darrennew8211 Год назад

The only thing I've had problem with is overlapping geometry during bevels. There's a paid add-on called Mesh Machine that I haven't tried but looks like it totally fixes the problem.

@az3dip Год назад

@@darrennew8211 For non-destructive modeling meshmashine not work. But i sometime use this addon for remove bevel.

@CPNSTRAdiction5925 Год назад

Finally! I was beginning to give up on looking for this video to post. Can't wait to dig in when I get home.

@thenextlayer Год назад

Yeahhh I've been promising it forever, just haven't had time!

@cat_citizen 5 месяцев назад

I tried onshape, and for a few simple objects it worked fine, but when faced with a more complex part in a project I encountered a few annoying bugs, so I went back to fusion. Mostly while trying to select things, or when I wanted to enter constraints and exact numerical values to multiple dimensions when placing simple geometric shapes in sketches.

@brianprice7020 Год назад

I agree with your observations between organic and parametric modelling. I prefer Freecad because it is NOT cloud based and my internet connection is not always reliable. I enjoy seeing different approaches to CAD modelling so welcome to the band of u-tube demonstrators.

@proterotype Год назад

Do you see any downfalls at all with FreeCAD? I'm just learning it

@djispro4272 Год назад

I mostly knew that Blender was a mesh program and that Onshape was a parametric CAD program, but I am sure others who don't know will find this useful. I personally started using Fusion 360. I think a video about Marlin vs. Klipper would be interesting.

@leeroyjenkins7915 Год назад

Klipper, period. The limitations of marlin of current gen printers are everywhere but can most of the time boiled down to one argument: for marlin, the processing unit has to run the printer control AND the kinematic calculations, which is very limiting for current gen printers in terms of speed and features. outsourcing cpu hungry stuff to a raspberry (clone) frees up ressources of the kinamtic processing unit.

@DejitaruJin Год назад

@@leeroyjenkins7915 Ah, no? I've got one printer on Marlin, and one on Klipper. The split processing of Klipper is only an advantage on less powerful hardware, like, say, an ATMega2560. Once you start getting into more modern ARM boards, processing power isn't going to be holding you back.

@GaryParris 9 месяцев назад

Freecad with Blender is the best option

@TrueBark Год назад

Thanks for the inside look. Was struggling to chose a software for me because its such a diverse topic to get into. This will surely give me a better look at those 3D modeling softwares. Cheers!

@paulalcock4948 Год назад

I’d be really interested in seeing more tutorial or “learn with me” type videos on Onshape. I started 3D printing less than 1 month ago. From the start I had some very specific builds in mind for my kit car. I found Onshape in exactly the same way via the teaching tech videos, which are excellent. I’m already up and running designing parts that I imagined may take me many, many months, if not years, to learn how to do. It’s an excellent product with a reasonable learning curve, but there’s loads I’m still to learn.

@erikringwalters 11 месяцев назад

For those interested in Blender for 3DP, I recommend taking a look at CAD Sketcher add-on, which allows for a fully parametric, non-destructive workflow. MakerTales has some great videos about CAD Sketcher as well as precision mesh modeling in Blender.

@teknerd001 Год назад

I use Blender for 3D printing. However I had a huge amount of experience using it before that. I have used it to create precision parts without using any plug ins other than Box Cutter which is optional and the 3D Printer one which you kind of need anyway. It does not handle things like a CAD program unless you add a plug in for it but I think the end results are the same. I don't have that many issues with incomplete manifolds either. So while yeah CAD can do certain things better maybe, Blender just works and it appears to be extremely accurate. I just find it a lot less clunky to work with than a CAD system. But that doesn't mean I won't check this out it looks pretty good.

@DavidHolden15911855 Год назад

When a co-worker started 3Dprinting he started off with Onshape over a year ago, so when I recently got my MegaZero (and now Ender 3v2) I jumped right into Onshape since I've been watching/learning from my Co-Worker for the last year. So I've not tried anything else, but so far it has been working well for me

@tripperdan Год назад

I'm new to self design for 3D printing, so looking to start learning a CAD program to use.

@NathanielStickley 6 месяцев назад

I've been using FreeCAD, but Onshape seems cool. I might try it out. One thing I like about FreeCAD is that the parameters can be put into a spreadsheet and you can simply modify the spreadsheet to change the dimensions of things in the 3D model / sketch.

@joeking433 4 месяца назад

Freecad has a bad reputation from what I've seen.

@randelmatt 17 дней назад

@@joeking433 you've just got to know why and how to use it. There are very important concepts or buttons to trow such as the 'refine' option on each feature. Has a MAJOR impact on the exported files, for example.

@randelmatt 17 дней назад

@@joeking433 generally speaking I only use FreeCAD for milled or turned parts. As soon as you get into sheet metal or compound stuff don't even open the program. You are in for a world of hurt

@rbettsx 5 месяцев назад

Nice straightforward assessment. Blender is a visualization and animation application, whose modeling workflow is centrally geared towards creating meshes that deform well and play well with physically-based rendering. Those constraints simply do not apply to 3D printers, who, on the other hand, need more precision. Optimizing one application's architecture and UI for both is pretty much impossible. It's better to have two. 'Bye Bye Blender' is a bit harsh..😅.

@illustreightr2630 5 месяцев назад

The title got your attention. Mission accomplished.

@DavidHyman031 Год назад

Definitely would be interested in more on shape videos!

@kenthouston467 5 месяцев назад

It's worth noting that there are a few ways (probably more) to turn non-manifold geometry into manifold geometry in Blender. There are a few modifiers that make this very easy. For example, if you have a model that your slicer is complaining about, you can apply the "Remesh" modifier in Blender and then adjust the voxel size to get the definition you want - this will work because the modifier is looking at volume, not necessarily if the geometry is really clean. Remesh will also work on just a collection of shapes - you only have to join them into one object before applying the Remesh modifier. Remesh won't add "thickness" to non-manifold geometry - so - add a "Solidify" modifier first, then the Remesh (or just rearrange them in the stack). If your model is getting kind of angular, add a Subdivision Surface higher in the stack, etc, etc. You can even have live booleans for holes and things like that (the live boolean allows you to move the hole or other feature around at will). Finally, you can add a Decimate modifier at the bottom of the stack if you need to export a lower-resolution model. When you export to STL, Blender will apply all of the modifiers before exporting - which allows you to keep your model "live" to make any adjustments you might need later on. Having said that, I still use Plasticity for models that require a bit more precision and more flexible surfacing. I guess at the end of the day, you just use the tool that works the best for you :)

@powbud Год назад

Great video man! I could really relate to the confusion of picking the right software to invest my time into. For me things really kicked into gear when I swallowed my pride and just started using TinkerCad. Finally started designing instead of just learning. I plan to learn to use others as well, but for now TinkerCad is fast and easy for what I need. Was hoping that you would cover TinkerCad more in this video. Since this is the first video that actually answers the real questions I have about the differance between programs and why/when to use which.

@GaryParris 9 месяцев назад

Freecad and Blender better options

@powbud 9 месяцев назад

@@GaryParris different options

@anispinner 11 месяцев назад

I'm ditching Blender because they didn't sponsor this video.

@chadwolf3840 Год назад

Super helpful. Thank you!

@thenextlayer Год назад

My pleasure!

@Mdxmdx 8 месяцев назад

Sorry, where can I find the video you show at min 10:40 about the giraffe? Thanks

@MarkRouleau Год назад

I would love to see real world idea to product design. Like if you see you need something around the house, start recording and go through the design process to final print.

@SornDP Год назад

Nice green screen work in this one. For me, I've been doing me personal designs in OpenSCAD, but I have been wondering if it might be faster in something a little more visual. I'm leaning towards FreeCAD I think

@rickybevi Год назад

I'm using FreeCAD and it is a bit challenging at first, but eventually I got the hang of it. Open scad was my first choice and I still use it for simple parametric parts.

@proterotype Год назад

I'm in the same boat as you two I like FreeCAD because you save the files locally. You know what was cool, I tried using ChatGPT to print out code for OpenSCAD by describing what I wanted. It was pretty rough but eventually got to a part. The whole process blew me away

@SornDP Год назад

@@proterotype that's a cool idea!

@proterotype Год назад

@@SornDP thanks man! I told ChatGPT to think like an OpenSCAD coder at the beginning of the chat. You might have to examine the first part OpenSCAD outputs to see where ChatGPT got it wrong and then type in the chat what needs to be modified. Also I copied the error messages from OpenSCAD and pasted them which seemed to help.

@SornDP Год назад

@@proterotype thanks for the tips, I'll give that a try on my next project

@kredwol2103 Год назад

I think you nailed it. I can't tell you how many times I've wound up with non-manifold geometry through no fault of my own after using the Boolean modifier in Blender. It's especially painful if you're designing a part with a manifold inside another manifold (e.g. a hollow sphere).

@rbettsx 5 месяцев назад

I take your point, but not your case: a hollow sphere is just a sphere with a Solidify modifier 😊

@carlanderson5068 11 месяцев назад

I recall Onshape having a issue years ago. I think it was a change to the TOS. Maybe that was when they reduced what you could do with the free level, or they increased their prices, I can't recall right now. I used Fusion 360 a few years ago, and then they went to a subscription model. It might be challenging, but learning to use Blender is probably worth it.

@kevinm3751 Год назад

WOW, seriously? See how you are and thanks for showing me what you are really all about!

@sprinteroz2239 Год назад

@The Next Layer , I just went to checkout onshape and I now remember why I did never learn the free version and that is because all your files are "public" as it states its a public document so if you wanted to build something for a idea that you do not want public then you have to pay. This is why I learnt Fusion 360 and I just pay a month subscription when needed and then I can download my files.

@thenextlayer Год назад

That's fair!

@sprinteroz2239 Год назад

@@thenextlayer I have a question: If a person was to have a paid account on OnShape and then stop paying for higher service, dose all your files/ designs become "Public Domain" once you switch back to a free plan or stop using it? I ask this question because the way they have it setup, you have no creative rights if the files you make are public, as you have very little chance of putting a patent on your design if done on this free version of software, I say this due to the fact the files/designs were made in a public domain environment, so they become open source files... so do your files become public domain after you stop paying for there paid services.

@ls4life544 Год назад

I use onshape. It was easier for me to learn it, and the fact that it could be used thru different devices also is of great help. Other reasons also make it my favorite, but I will try blender since you mentioned that organic shapes may be easier to do on it.

@auronotcs5440 Год назад

Does onshape do CAM? I've got a router and plasma cutter i have to make tool paths for and not just 3d printing.

@kmartyCZ Год назад

I use Onshape now, but before that I used FreeCAD. I still prefer FreeCAD for modding existing STL's since working with STL as input in Onshape is pita. In worst case, FreeCAD for import STL, convert to STEP and this STEP import to Onshape. In short, when you compare FreeCAD and Onshape (ridiculous, isn't it? :-) ), Onshape is not able to work with STL as input file. Not even close as FreeCAD can. Or, which is possible cause, I still didn't found how to do in Onshape process similar to FreeCAD: Part-> "Create shape from mesh" -> "Refine shape" -> "Convert to solid". Which is imho essential when you want to call CAD "it can work with STL as input".

@MikeFoxLive 5 месяцев назад

If you ditch Blender or preferer Others to Blender it is up to you but just remember that Blender has been and will always be a game changer as far as content goes! Free and has all you need xx

@ragsdale9 Год назад

I don't use any plug ins but I've also used blender on and off since highschool. I usually export as an FBX or something everything can interpret. And sometimes for good measure I recalculate outside faces to ensure everything is pristine. Missing faces is a you problem though as booleans and most modifiers I've used never seem to cause that issue.

@LINDENERGENIE Год назад

For manifold issues I try meshmixer's solidfy function

@Nils_private 11 месяцев назад

I'd love to hear your perspective of the privacy / ownership options in onshape. While you compare blender to onshape free tier (...they promise it will always be free...), I feel onshape has two very big "flaws" in the free tier: One point for me is that all models in the free tier are public to everyone. While I probably could live with that, there's also the "ownership" point: The pricing table lists "Document ownership: public" for the free tier, which to me sounds like I do not own my model, and thus cannot attach a license to it. Do you have an opinon on that? (Thomas Salanderer has an opionion about that here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-S9hmi1leU2s.html)

@protonx80 5 месяцев назад

the ownership issue ... is always a dealbreaker for me ...

@Fley1965 Год назад

I use parametric modeling in Blender all the time. I use modifiers to create my models, which is more or less how parametric CAD works. Also, in the newer versions, geometry nodes are even more powerfull and are fully parametric. When using booleans, the result usually is watertight unless you do some strange things.

@thenextlayer Год назад

I’ve never been able to get along with it. Maybe it’s me.

@omegadeepblue1407 Год назад

It also has Sverchok, the visual programming node similar to Rhynoceros Grasshopper.

@martinsvensson6884 Год назад

If you're going to create pure functional models then a CAD program is superior.

@hd-be7di 10 месяцев назад

@@martinsvensson6884 CAD program is great for building an already finished design on blueprint... not so great for making big changes while designing something in 3D

@martinsvensson6884 10 месяцев назад

@@hd-be7di Whole purpose of CAD is to build something from scratch to exact measurements while being able to easily make changes to it at any point in the process. The whole program is designed for that at its fundamental core. Its one of CAD programs main feature and where it fundamentally differs from design programs like 3D studio and similar that are made for more artistic purposes.

@jamiemacdonald436 10 месяцев назад

I worked with Onshape for several months before buying my first 3D printer. Since then I can count on one hand the number of models that I have directly printed from someone else's design. I've mostly designed all of my own prints, and only very occasionally modified someone else's design for my own particular purpose. If you haven't started already, I highly recommend learning one of these CAD packages. It's very rewarding seeing your design develop and progress to a final working printed part.

@muhammadzazulirizki1000 8 месяцев назад

Hi, have anyone tried both plasticity and onshape? Would love to hear the objective comparison, the pros and cons between those two

@PeterMoueza Год назад

Personal bookmarks shared : 1:29 choices 1:37 few weeks 2:10 organic 3:10 manifold 5:38 unusable constraint 7:40 online, smartphone 8:50 CADsketcher addon ++++ 9:45 manifold 10:30 organic 10:48 reference image

@kurtlandrus857 Год назад

For me OpenSCAD works great, I really like I can import any STL to re-mix and build off other components. I want to learn FreeCAD, and Blender for their different use strengths.

@projecthivemind3239 Год назад

FreeCAD has an OpenSCAD workbench that somehow integrates the two. I've just stuck with OpenSCAD and the SolidPython wrapper for OpenSCAD, so far.

@radnukespeoplesminds Год назад

I love openscad too. I tried freecad first though, didnt like it as much as openscad or cadquery even though i learned cad with autodesk inventor which is most similar in gui to freecad

@peircedan 7 месяцев назад

I have been using OpenSCAD for over a decade and any time I started looking at something else I ended up going back to what was familiar. I have been planning to learn how to use blender when I retire and that is just around the corner now. I'd like to expand beyond 3d modelling for 3d printing. I'm accustom to using Git for version control and it works well with OpenSCAD. Last point is I like using OpenSource and running it on my machine. Cloud storage is one thing. Cloud applications is something else entirely. I'm not that trusting.

@joshfromga9017 Год назад

I've been enjoying learning Onshape; apart from a couple atempts at Sketchup a few years it's the only CAD software I've used. Maybe I'll put it to use in a professional setting someday, for now I just fiddle with making little display stands and one-off tools to print on my little resin printer.

@markmanning2921 5 месяцев назад

onshape sends all your web based data to them too ? i.e. everything you design in it gets shared with them?

@Matt-lp1xp Год назад

I'm invested in Blender at this point. I think it's a safe bet because ultimately as I actually get good at using it there are endless possibilities and complete control over my models. I've found that Merge by Distance, Recalculate Normals, and then the 3D print plugin Check All > Make Manifold cleans up what I have been doing, at least so far. But as I use it I can tell that my workflow is inefficient and overly complicated. I am also remixing existing models most of the time. I come from an AutoCAD background and was surprised at how obscure doing simple things seems to be in Blender, however, and I bet OnShape is more akin to my workflow in AutoCAD so I will probably look into a parametric suite at some point.

@thenextlayer Год назад

"make manifold" almost never works right for me.

@martinsvensson6884 Год назад

OnShape will hopefully be more like Autodesk Inventor or Fusion..

@BlackDragonBE 10 месяцев назад

I wish there was a free and open-source CAD application that didn't suck like FreeCAD. I love the interface of Fusion360, so that's what I use for parametric modelling. For organic shapes and other more artsy models, I prefer Blender. Cad Sketcher for Blender is also looking promising, but it needs a lot more time in the oven.

@_droid 7 месяцев назад

Agree. Blender is a terrible CAD app and while FreeCAD has some awesome features, it's really buggy which makes it incredibly frustrating and time consuming to use. Plus FreeCAD is really slow for anything more than simple projects due to Python junk. I won't touch F360, OnShape, or any other "cloud" crap where they have their boot on your throat.

@Tottorul 6 месяцев назад

@@_droid what software are you touching?

@ferdinandhenkel4567 Год назад

I was surprised by how easy it is to learn parametric software. Started with Blender, now mostly using Fusion. Mainly because my focus shifted art like projects to more engineering style

@captainofiron Год назад

As a Mechanical Engineer MCAD is life haha And gotta say Onshape is slowly becoming a world beater not only for it's modeling tools but also on the backend the integrated PDM/PLM tools are just incredible

@thenextlayer Год назад

Interesting. I don’t know what those are, but interesting

@captainofiron Год назад

@@thenextlayer MCAD = Mechanical CAD, PLM = Product Lifecycle Management and PDM is Product Data Management. Typically the CAD package and the PDM/PLM are 2 separate pieces of software that sometimes work together. But with Onshape they are all built into 1, so it really takes collaboration up to the next level. I can work on a design with a fellow engineer and we can both be working on the same parts/assemblies, but for different purposes so we can work in the same studio or fork the design and they work on something like DFM (design for manufacture) while I work on something else like refining the design thru FEA (finite element analysis)

@Sembazuru Год назад

Kind of amusing to hear FreeCAD being labeled "simple" alongside TinkerCAD... FreeCAD is super powerful, but the learning curve to unlock that power (knowing which workbench has the tool you need, and which tools are compatible and incompatible with which other tools) is quite steep. This learning curve can be quite off-putting to many people. MangoJelly here on RU-vid has quite a few really good tutorials if you want to get into FreeCAD. I chose to go FreeCAD for my parametric designs because of the offline aspect. I don't have to rely on someone else keeping their servers up to use FreeCAD, but I do recognize the cost of not having any collaboration tools beyond sharing files (and the headaches of version tracking) available.

@localhost123456 Год назад

Yep. FreeCAD should be supported more so that the UI etc. can be streamlined further by the devs.

@falsonaga 3 месяца назад

Commenting so I can come back to this comment

@sboeke91 Год назад

I’m a big fan on Onshape. I’m an engineer and I used Solidworks, NX, AutoCAD, and Creo. Onshape is just so easy to use. I do all of my DIY stuff in Onshape. If I ever start my own engineering company, Onshape would be my choice.

@notsonerdgaming3406 Год назад

Careful woth that, they are going to start locking features behind a subscription of some kind once the userbase is big enough

@adronblount Год назад

how would you compare onshape to fusion360 or inventor?

@klave8511 Год назад

I like Designspark mechanical. A lot like solid edge, different in some ways to Fusion, easy to learn and stable. Can be parametric if you want that. Free, not sure about privacy of models. Thanks for the “heads up” on Blender, really appreciate that I don’t have to waste time learning it unless I really have to.

@Spacekriek 11 месяцев назад

Great program, I fully agree. Unfortunately Ansys brought out version 6 now, forcing people to pay for the ability to import stl, Sketchup and other file formats where this option was part of the package with the earlier versions. Currently I am getting up to speed again with FreeCAD.

@drakestorm4691 Месяц назад

One question. Oneshape is some hybrid of CAD and Blender? For mechanical and parametric stuff I am using Autocad, for design, quick modeling blender. Thank you.

@JernD Год назад

Fantastic video! I really liked how you objectively compared these two tools. It is really daunting for a newcomer to navigate the strengths and weaknesses of these different types of tools! I am involved with a free and open source project called build123d that is a type of CodeCAD (think OpenSCAD) but has elements of OnShape e.g. sketching/filleting/chamfering.

@damiana.9472 Год назад

Fully agree. I had to learn both, FreeCAD and Blender to get what I wanted.

@MarkRouleau Год назад

Does it bother you that if you use the free version of onshape that you do not own your design anymore?

@FlyBy2507 Год назад

If it's free, you're the product ;-)

@mroek Год назад

@@FlyBy2507 Yep. And that's why I'd shun Onshape like the plague. The fact that anything you create in the free version is by default shared with the world is a no-go.

@JoeC-tt9oq Год назад

I will take all the onshape tutorial content I can get!!! Teaching Tech is also why I chose it and his tutorials have saved my sanity lol. I've even considered taking an online course but I'd love more 3d printing related content.

@thenextlayer Год назад

I'm taking one on SkillShare, I'll have more details about that soon :)

@JoeC-tt9oq Год назад

@@thenextlayer That's where I was looking lol. Love to hear your take on it.

@JoeC-tt9oq 3 месяца назад

Any update?@@thenextlayer

@ArcaneShadow82 Год назад

I have found having a few tools in the toolbox makes 3D modelling smoother but it is all subjective. I personally use blender as it has add-ons that allow for almost everything and the community is always looking at ways to improve the software. The best way is to experiment with different free programs and find one that works for you.

@ElmoTheRed Год назад

I was turned onto Onshape by your previous videos. I am using this in conjunction with Fusion 360. I am a engineering designer by trade so CAD comes naturally to me but I have noticed that Onshape does not handle dxf or dwg files well and when I have those models or I have to follow an somewhat organic design I use Fusion 360. I am in the process of learning the great ways of making a part and being able to make it any size with Onshape. Good luck all. Even coming from a CAD background it can become overwhelming.

@thenextlayer Год назад

Glad to hear you learned about OnShape through me!

@sythys_ Год назад

I use Blender all the time. It's very versatile. The entrance to cad in blender is hard on the other hand. To use Blender efficiently to 3Dmodle for 3DPrinting, I think it's important to understand the behavior of many processes deeply. For example, the way that the boolean modifier merges or cuts meshes. Iterating and editing design's in Blender is insanely fast for me. If you commit on using blender for technical modeling. There is a massive barrier to overcome, after which you learned to use this tool to create any shape you can imagine, without thinking of a way to build this shape but create it with ease instead.

@darrennew8211 Год назад

It's also phenomenally easier to use Blender to edit someone else's STL than any CAD software. Like, "this structure with the hole thru it needs to be 2% smaller, but I can't modify any other part of the model including the hole in the middle of the part I'm shrinking." Yeah, that's like 20 seconds in blender.

@switch2324 Год назад

I went the other way round. I used solidworks for years but then wanted a career change into more artistic areas and learned blender. CAD software will be much better for this sort of thing as its non destructive however you can still get modelling errors instead of non manifold issues. For example if you roll your tree back and edit a sketch the model is based off and remove lines that features are relying on for instance those features become errors. As long as you fix them it should be fine but if you build on top of such errors things can turn very ugly.

@rucdoc Год назад

I saw the same tutorial series as I was trying to figure out what cad software to use with my new 3d printer

@kevinwalker3918 10 месяцев назад

Thanks you so much for this information and presentation! I have been resisting going with Shapr3D, but its licensing is not friendly by any means for Hobbyists/Makers. I have a very likely alternative and while I am still learning Blender and can do some things in it, ease of use and reducing the chances of problems with the miniatures/terrain enhancements is greatly desired. Thanks again!

@automaticprojects Год назад

Great video. I’ve been using Fusion 360 off and on since 2016, but would love to learn Blender for more artistic projects

@jefferygrantham5582 Год назад

You should absolutely do a tutorial series for onshape!

@gizmofactory Год назад

yes, an advanced one :)

@olivianoel5091 7 месяцев назад

I’m currently having problems in blender because it’s not staying symmetrical even with it selected. Then when I figured out how to re set the symmetry it left holes in my design.

@prauwnsauce 7 месяцев назад

I’ve been using my printer a week and already I’m at that point where I search for something and it’s either paid for or not there, as much as I love supporting creators I only have so much money and I’d rather spend it on resin. So finding a software I can use to create things all the way down to hairs on a foot would be lovely

@flolorenzo Год назад

I'd still stick to Fusion 360 as it allows me to work on the go without an internet connection. And on top as a student, I get the full access for free. For me it was like a week to get used to it and since then I could further develop my skills

@LordCreo Год назад

Free for anyone for non-commercial use!

@FlyBy2507 Год назад

If they change their business model, you're screwed.

@flolorenzo Год назад

@@FlyBy2507 yeah probably 😅

@bcarroll03 Год назад

I have been using Onshape in a professional environment for 6 years now. I started with the free version and learned CAD as a hobbiest, I put around 500 hours into the program in the first 6 months. I guess that amount of usage flagged sales team and I was bombarded with VERY aggressive pressure to upgrade to a commercial license, they threatened to close my account so I would lose access to all of my files, it's felt very predatory and has left a bad taste in my mouth ever since. Fortunately I was able to retain my account after convincing my company that the professional subscription was worth it for us. Just be aware that the guys are ruthless and will hold your files hostage, my only saving grace was the fact that I had a company fit the bill, if you are a prolific hobbiest, maybe look elsewhere.

@nicholaspostlethwaite9554 Год назад

That is a very telling tale. Being held hostage presumably as it is browser based (junk)? People could be cut off from everything they ever did? Just another subscription scam attitude to my mind. No software safe and working on your own computer, like proper Blender.

@jomitoh5111 3 месяца назад

I tried opening blender but it says I need a better opengl, is there a site to download an upgrade

@dovfeder3253 4 месяца назад

I find all of your videos, exceptionally informative and well presented. I do have a question though - what do you think about Tinkercad?

@FlyBy2507 Год назад

FreeCAD.

@shanewalters7821 Год назад

Fusion 360 because the models are mine and do not have to be shared with the world. That and offline capabilities. Although my kids have lower end laptops so I may show them Onshape.

@itzmatt4963 Год назад

Hey would Onshape be good for making transformer toys? Because I am trying to see what software is good

@thenextlayer Год назад

It's good for engineering projects :)

@johannmalave61 Год назад

exelente video i dont have a 3D printer im look for all the info to now what to bay, do you have info on a first 3D printer o thins to look, and yes plis make a video of onshape

@thenextlayer Год назад

Thanks! My current recommendation for first 3D Printer is jle.vi/bambu or jle.vi/sovol if the budget doesn't allow. I have a video coming out about the Sovol SV07 and it's amazing.

@kritikusi-666 11 месяцев назад

Ahh yes. Ditch the free and go with the $1.5k annual cost. Big brain energy. Sometimes the YT recommendations are good, but sometimes are pure trash.

@danilotetesi3503 3 месяца назад

Will be really interesting to have a sort of course to use the program great.

@stenmartens7179 Год назад

I've landed on onshape as well for some time now as my go-to modeling software for 3d printing. but man, it is such a proces.... the trouble is that you really have to learn to think in a certain way in order to do the steps in the right order to get the result you want. my latest project is a replacement part for my headphones, which i modeled square hoping i would then later have the option to warp it so it fits the round shape of the headband. but alas, i have not found a solution to that problem yet

@LicheLordofUndead Год назад

I am using FreeCAD and a little bit of Blender, I have looked at On Shape, however I am not able to get it to do the simple things I need it to do.

@kingofjesters23 Год назад

I mainly use Onshape as well but also use FreeCad a lot even though it can be a massive pita sometimes. Tried Blender but didn't get along very well

@thenextlayer Год назад

Yep, sounds about right.

@alberdw1985 Год назад

I use Microsoft 3d Builder to modify STLs it will sometimes also repair non manifold STls also if it detects it when imported , I'd like to learn a more powerful option like on shape but right now I can't find the time to do so

@thenextlayer Год назад

Honestly, a couple hours on a saturday is how I learned it

@delicrux 7 месяцев назад

thank you i just started a costume headphone design and i need something structural and realized it was difficult to get everything in the correct dimensions for accurate printing. just subbed the channel

@thenextlayer 7 месяцев назад

Welcome!

@luxxeon3d 7 месяцев назад

Good video. I have to admit for the type of shapes I create, which are organic shapes primarily intended for 3d printing with SLS (no supports), Blender is fantastic. However, it tends to require special modeling care when creating hard surface objects to exact dimensions. There's definitely some forethought and modeling considerations which needs to be implemented to avoid non-manifold topology while also maintaining a perfectly accurate water-tight mesh. There are some plugins that can help accomplish this in Blender, but of course it would be much easier in a capable NURBS environment. I used to work with FormZ and Rhino, but Onshape looks interesting.

@atrejosq 2 месяца назад

Great but, what about SolidWorks, or Sketchup? I use Blender, SW, Sketchup, depending on what I want to design but, could you compare SolidWork with OnShape?

@brandb16 Год назад

I also use F360. I don't know if it's easier or harder than OnShape, but it feels pretty easy for me and I enjoy working with it. I don't enjoy the slow lock down of paid features. So maybe I'll give onshape a try

@darrennew8211 Год назад

I'm betting onshape will turn into a slow lockdown of paid features too.

@bakhteria 7 месяцев назад

whats the easiest way to convert mesh to stl file?

@copetedavid Год назад

I use Rhino 3D what are your thoughts?

@kavehadib8402 7 месяцев назад

I’m a noob to organic figure graphics. I’m interested in 3D printing my own football hero’s and other sports figures from 2D photos. Can you recommend software and a group I could join to learn these skills? My appreciation in advance!

@cbgslinger Год назад

OpenSCAD works well for me. It is simple, straightforward, and all on my computer. It’s usually overlooked because it’s different than all the others. I’ve had no manifold problems!!!

@bikeninja956 6 месяцев назад

Advanced Solidworks user here. So CAD software = NURBS based (Non Uniform Rational B-Splines) , 3D graphics Software = Mesh based (triangles). If you're designing building parts via machines (CNC, 3DP), learn to CAD, if you're doing digital animation, video FX and the occasional 3D print, go with Mesh based software. Still waiting for the holy grail that does both :)

@hwbehrens Год назад

Am I the only one who feels like the production quality here is *way* better than the subscriber count would suggest? In any case, thanks for the info -- very useful!

@thenextlayer Год назад

haha, thank you :) Give us a few more months ;) Only been around 8.

@magicgundam Год назад

Just looked into Onshape and started an account. Noticed though that the free account is "public", which I'm assuming means any designs created are public domain and can be viewed/downloaded by anyone?

@thenextlayer Год назад

Yep that’s the trade off

@magicgundam Год назад

@@thenextlayer Good to know! That rules out their free version for me then.

@hexzadark6241 Год назад

you can swap to any metric system and have things perfectly to scale also

@emmakun Год назад

Have you tried CAD Sketcher plugin for Blender? I would be interesting to hear your thoughts on that one, since you already have quite some experience using blender for 3D printing modeling.

@sebbosebbo9794 Год назад

maybe a tiny cad glimp spart for blender...

@joshgpro 10 месяцев назад

What about the CAD Sketcher plugin for Blender?

@thenextlayer 10 месяцев назад

Yep that’s the plug-in I mentioned you would need if you wanna do parametric. I didn’t mention by name

@johnguynn5212 Год назад

The Teaching Tech Onshape tutorial gave me everything I needed to start designing and printing things I could use around the house soon after I got my first 3d printer. Blender seems way overcomplicated for anything I've needed so far.

@thenextlayer Год назад

EXACTLY.