I Made a Secret Exhuast Exit in My Tool Box [Ultimate Sleeper Build Part 4] 

FRANKENSTEIN JEEP VETTE IS ALIVE ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NH52XWF6nNk.htmlsi=CJRk34OCeAenf4rX

This build is Awesome! The only thing that would make it better is if the exhaust blew the lid off another smaller toolbox, that would be hilarious. lol.

Never stop making videos! I love the human error element. It shows how perfectly imperfect we all are.

Who else watches this guy because he works exactly how you do on your own stuff lol my garage is horrendous but I have decent stuff and can do decent but my own projects are definitely the learning points other peoples stuff….pretty flawless

I'm sad it took me this long to find this channel but man, I'm hooked.

The 80s dodges are getting popular.. that shelby charger is a very fun light weight turbocharged. . Jessie james just built a sick rampage

Can’t wait until you get that thing tuned! Gonna make you push even harder on the jeep lol

The Starion/Conquest is a mean machine, sir.

So stoked to see these coming together!!

I been missing your videos man. Good to see this.. Your truck is such a badass build. Everything thing you do just gets better and better. I have always seen you becoming great one day as long as you never gave up. So glad to see you proving me right. Awesome job. Keep up the great work man...👍

I love how I can tell when these videos were filmed by the weather lol

I haven't commented on your videos in a long time, Preston. That's alot of work!

I love this series so much!!!!!!!!!!!

Fyi: that exhaust flange on the turbo is called a marmon flange. Its the typical flange on diesel trucks, since most aftermarket turbos are based off of old diesel turbos. Same concept as a vband with the clamp, just tapered instead of flat. And the exhaust pipe side is normally just flared, rather than having another machined flange.

8:53 Glorious dimes

Big leaps in the content ! 👌👌Iv’e been watching a few years now and i gotta say the quality of this video is of much higher quality than i would have anticipated. Be very proud of this episode. Very well done and i can’t wait to see the next !!

The best thing about your videos is it shows us Idiots can be cool 😎 doing stuff that really works 💪 😊

Nice job welding brother. Great video!!!!

I’ve been watching for a long time and I’m really stoked to see things seem to keep getting better for you, the channel . I especially like your editing of the videos your a funny fucker. Anyways CHEERS!

Loved this series bro just found ya after many years cant remember where i seen ya face but good to see ya at it still

Love it, put a knock off tumbler on the exhaust hole on top of the black toolbox for even more , neck turning, whaaas!

Awesome videos!! As for welding, less heat with stainless. Base material should start slightly melting, then add filler. Slow and steady for each melted dot of filler, it worked for me! Never give up and keep on doin it, its the only way to get better!!!

Great work. Great welding

Everybody needs a "secret exhaust". lmao!

Your channel is awesome, thank you for everything that you do!

I saw your short on this, so glad I stumbled upon your channel

I’ve been watching your videos for years. Your Tig welding has gotten Nyce!

I just love your channel. I can see myself once i have started on my project...

lol this is exactly what I am about to do to my Nissan Frontier! Kinda creepy it showed up in my recommended. RU-vid must read minds. Awesome video!

Those lights are pretty badass! Here I am with $22 LEDs from harbor freight like a peasant

14:48 to 14:51. 😂😂 i felt that in my soul. Thank you for the great content 🙏 🤣

Yellow is my fav color, great choice!

Really enjoyed this video, that’s an awesome shed! Only thing I’d probably do is add some kind of screen or mesh anywhere there’s venting to keep small animals, birds and most importantly, big ass spiders out!

The truck is coming along nicely 👍👍

Shelby Charger.... those were badass. I had an 87 Charger, but it wasn't the Shelby. 0-60 if you were on a big hill. LoLoLoL It was a $200 car that lasted 6 months before the head blew. Traded it for 2x 15" Fosgates in a huge box. 😊

Love this! Love from Norway!

Makes me damn proud Preston! Can’t wait to see what you get into next!

Why are you so underrated love your videos when you get big please stay the way you are love your content

What die grinder is in your drill? That thing eats metal!

Always wanted to use an old tool box to hide a nitrous bottle in the bed a old el camino I was building back in the day. It was already a bit of a sleeper. Ran high 12s with a hopped up little small block that looked completely stock.. stock air cleaner and all. Sold it before it ever got nitrous. . Fun times.

been subbed for years mate as All your stuff is super rad! the secret boosted truck is on another level of high quality work, like there are many like this (boosted trucks that is ) but this one with all the extra work to hide everything is freaking awesome man

That’s awesome

Never change Preston 😎 yet another fantastic episode ! 👍🏽

Good to see you again.

Could rivet an old red rag onto the tool box over the exhaust hole flap.😎👌

Conquest is RWD chargers/daytonas/omnis etc were fwd

I like the sleeper. I like the welds. (much progress sir!) I like the lights. and I like soup

Journal bearing turbos should almost never never be restricted. If they smoke its usually because you have a poor drain. If you look at Garrett or similar manuals they state 3/4 minimum to 1" ID drains should be used. Almost no one does that. Also if you look into most journal bearing turbos they have build in restriction before the bearing. I run an6's to all my stuff and I've never had one smoke. But i do use 3/4 ID drains. Prob won't put 30k worth of miles on your turbo car... so a little restriction isn't going yo be the end of the world longevity wise... But its basically a "no-no". Call up any real turbo manufacturer and ask.

try making a hole in ur exhaust to put a o2 bung in and u dont have a drill but u have a tig torch 150amps later xD

Very entertaining 👏

I'm wondering if the cut out should be done at the bottom of the short pipe. Then it'll block the long side when open then block the short side when closed? Just my 2 pennies. Awesome build!

Very cool

I'm guessing you got the Ryobi tools at a clearance sale at Victoria's Secret ?? Hey - cool, if they work - they work.

The hate on the starion was unnecessary 😂

Epic fam ... this thing is coming out so radical dude ... and I personally think the tool boxes is dope af and total sleeper rat rod (and that's my thing) looking ... this really gonna get spicy once ya get some injectors and a tune going ... peace and love bro keep it rad stay safe and build on... l8z famz and keep having fun

Hell yeah! I'm inspired to do some driveway idiot stuff. I dont have a garage so to the driveway!

fender flares and a dually swap wpuld be sick

Yes, dodge made a Shelby charger in the 80's. It was a turbo 4 cyl

Epic intro!!!!!

I literally said you’d have a ton of turbo lag and I was right and you said I was an idiot. A goood amount anti lag can fix that but damn you won’t get that thing lit without it

Hook that cutout line to vacuum and when it gets boost pressure it’ll open the cutout and close it again on vacuum

30:12 you're welcome

the lag finna be insane but nothing antilag can’t take care of

24:08 😂

Shelby made a dakota too

I woulda cleaned the dusty spot so my silver marker didn't get dirty. Genius

Chrysler Conquest TSI = Mitsubishi Starion The Shelby Charger was based on the K-Car platform (as were many other Chrysler vehicles in the 80's) and it had the 2.2 or 2.5 turbocharged engine. No Mitsu parts were used and Carroll Shelby just slapped his name on them, neither cars are related to each other.

Shelby GT Charger! 🤔🤔😆🤣 Science!😂🤣

Video idea using a compressor to boost a car or bike

I have always wondered what all of the powder overspray would look like if collected and sprayed. That's pretty cool. You should clear a part to see if it makes the illusion power change the look any since the illusion powders change a bunch with clear.

Drop the band saw blade guard down before cutting off your arm. Fyi from future

Beware the man who's not afraid to put holes in his toolboxes. Seriously though not a GM guy, but have much respect for the work you're putting in.

0:18 lol

That turbo lag is finna go crazy😂

Let’s gooo

Why not make a box under the tool box with a pump and oil for the turbo has it own oil system feed line and a return line

I had a shelby its actually bazed off a plymouth horizon tc3

i want a video of like only him evil laughing

full pull!?

I have a question. Not a criticism but curious why you didn’t just do a tonneau cover? The toolbox looks janky since you cut it up. Everything looks like it would fit under a tonneau.

You could deliver pizzas with that truck it already has a pizza warmer in the bed.

He isnt wrong, I have an 89 Shelby Dakota...

I luv this shit

I have a question, this isnt a criticism but after spending so much time and effort hiding everything in the tool boxes, why then have an exit from the top of the toolbox. Looking forward to the rod build.

At some point people arent going to believe the Idiot part of the name anymore mister. Maybe Garage Shenanigans...lol

what do you have done to the motor? (and what motor does it have because I forgot)

It's okay with us if you don't glow as bright as an extinguished candle wick.We're used to you not being that bright.It's all good, as long as you like soup.Soup is good.Hey,the truck runs??! Well, you get a Gold Star for the day young man.Go get yourself a banana...

love to you still grinding man we talked along time ago on i believe on FB and the content is amazing

It is true

Actions performed by idiots refer to your Google🤣🤣. That one line won my subscription 😂👍

The sleeper effect is lost with all of that cam chop.

Hey Preston if I choose the $20k from Gumout do you get to keep the truck? 😎

Fun build, but how dare you disrespect the Conquest/Starion SMH

American Will Poulter

Well the name is right.

If they ask what’s in there say a ryobi pressure washer

*Not a Conquest.

"lsd doesn't work" that's because it isn't an lsd 😂

Dodge daytona

bad product promo , those lights are all sold out.