I Made Cedar A Flagpole At The Ranch! 

Well done. I wish I was your neighbor. God bless you, our American flag, and our country.

"The best thing I've done on the property so far". AMEN.

Yes there are a few left!!! You were, in the scouts, that explains a lot!!!!👍👍👍🤠

Love it. Every American needs Old Glory flying in their front yard. Congrats, Vinny 🇺🇸 👍 Looks great all the way from Massachusetts.

LONG MAY SHE WAVE!!!! GOD BLESS RED POPPY RANCH!

Job well done! We fly the flag all year with a flag pole solar light.

Nothing better than the flag flying. Well done from a 28 year Air Force veteran.

God Bless America, God Bless our Military, God Bless the Red Poppy Ranch. 🇱🇷

Well done sir, a patriot! Good ole two half hitches.

Very well done. Especially in an age where patriotism and love of God and Country are out of vogue......

I love how you carefully kept the flag from touching the ground as you attached it. True respect thank you

All the old video's are coming back around 😃. Great job

That was awesome, thank you for showing the way you did that. I really like how you tapped the pole for the eyelets. Looks great on the homestead.

Great job... God Bless America, also you and your Family !! Happy Fourth 2 y'all... still Liv's all the videos, always enjoyable and your efforts r so appreciated. 👍 🇺🇸

God Bless the USA.

Love the music. Nice job. God Bless

Long may she wave. 🇺🇸

Thanks. It's a blessing living in the land of the free. Only great things ahead for you and you young family.

You should plant some Red Poppies around the flag pole. Larry

This is a great idea for a diy flag poll, as a Canadian I plan to do this and add an American flag to the poll I put up because in my eye America is one of the greatest countries in the world!

This video warms my America heart ❤️

Finally. A man who does this in a practical wsy.. See lots of videos where they dig a hole the size of the Grand Canyon with a sleeve and 14 tons of concrete. Well done…

I agree...It is the BEST improvement you've made so far. Remember, Freedom is not free, but it's worth fighting for. Thank you and may GOD bless you and your family.

Great video to show us to install by yourself of this flag mast, very interested so see that you can do it yourself without any qualified personel. I love to fly the national flag daily so love to watch your presentation, Red poppy ranch..

great job i like the way you tied the knots

You sir are a true Patriot!!!

I know its an old video and I am not sure if anyone has mentioned this before, but I greatly appreciate your dedication and love to our Nation. I am a Marine Corps Veteran and I am positive that there are millions more who appreciate it.

Much respect your way. Awesome. I want one of these so bad it hurts me.

This is the BEST DIY Flagpole vid I've seen, and doesn't require a welder etc. ( although where I am, we would have to set it in to 3 or 4 feet of concrete cement). As the granddaughter of a WWI Veteran I appreciate the name of your farm. Thanks from one of your northern neighbours. 👍🇨🇦

Well done! Happy 4th!

Great Job!

Nice well done I just wish more people respected the American flag and this country.

You made a old Marine tear up! Thanks for sharing. God Bless America. Semper Fi

Awesome job. I thoroughly enjoyed watching your video. I appreciate your spirit for Old Glory.

What a beautiful video,God Bless America. I love your videos it's wonderful to see a man so dedicated to his family.You have a great story voice.God Bless You and yours.🙏

maybe so as the rope stretchs... above the bottom eyebolt use a turnbuckle.. so when the rope needs to be tightened. just tighten the turnbuckle.

BEAUTIFUL!!

Keeping heading of the flag so tight like that will prematurely wear it out on the ends. You need to let it have some slack. Keeping your halyard that tight will also wear that out. You should get a cleat and a pulley on top. Also, all quality flags (Annin etc) are fully USA made. Lastly, if you had used cement, you would have only need to put the pole two feet deep and would be more sturdy then it currently is. This is constructive criticism by the way.

It's beautiful!

Congrats. My only comment is you should of put a PVC sleeve in first with a stone base. Cement the PVC in place. Then insert the pole in the PVC. This way it will last YEARS to come. Other then that I love your patriotism and thank you for being you! God bless you and your wife!

God bless you patriot.

Glad to see an American who is proud of our country's flag.

Your energy is amazing as I have one of those twist hole augers and they are a bear. Well done.

Job well done. Thank you for displaying our Flag.. BTW it needs a night light, go solar... one of the better ones that last all night... God Bless Ya, our Flag and America.

God bless America .....

I truly appreciated this video, and the statement made about purchasing a kit.

I like that you mentioned your Dad as a knowledge source.. underrated!

You did a real good job.

very nice Bless you and your family

Brother, that is the hardest I have ever sern anybody work to dig a hole. Those things may be a family heirloom but I think I would hang them up a a museum piece and get me an old fashioned set of post hole diggers. Good video

I am an old Industrial Arts Teacher so here it goes. A Flag Pole should not be less than 20 feet, 25 feet nice for a home, 30 feet is my preference. You would have only needed 2 feet to 30 inches in the ground if you would have used pre-mix concrete with a small pad around the pole. The Pole should have been sanded and painted with aluminum paint or Chrome spray paint. I would have put a 1/4 inch pulley at the top of the pole and use 1/4 inch Nylon Braided Rope instead of that small twine. I would placed a standard rope cleat to secure the rope at the bottom. A Ball fixture should have been placed at the top of the pole even if it came off of an old brass bed post. The Flag Pole I describe would have cost a tad bit more, but it would have been gotten an A+.

Well done. God Bless the USA.

A plumber can t build ANYTHING without channelock pliers!! I m a retired one too.

Nice job, great music choices. Can’t believe you didn’t hit a rock while boring the hole.

Well done. Have not seen the flag on recent videos. Really enjoy your videos, pls keep them coming.

Nicely done well played. I am on my way.

now put another flagpole next to it with a "don't tread on me" flag. LOL

I have bought and erected 3 flag poles in the past 2 years, a good storm and wind brings them down every time, much better off doing it with your own materials than buying one, ones bought are thin aluminum and cheap made, I have had them all concreted in, my last one folded and broke about 3 months ago, so now I am sliding 2” schedule 40 pvc pipe over the aluminum, see it the wind can break that one lol 6 ft buried though is a bit extensive lol but it will definitely be sturdy lol looks great though, awesome job

Thank you so much for your video! GOD BLESS AMERICA.

Well done. You're a damn fine American.

Good work.

I'm just going to put mine up like they did when they first started . Fell me a 30 foot straight pine and buck it . Add my pilot holes put my eyelets in an pully at top presto. Of course the bark will stay on permanent. Well as long time . Thank you to our fourfathers. God bless your souls for the bill of rights .

Awesome. Thanks for sharing ❤️❤️

GOOD JOB GOD BLESS

Excellent Work, Looks Way Better Than Store Bought! I Absolutely Love The Version Of Amazing Grace Playing In The Backgroud, Where'd You Find That???

A very nice patriotic touch!

There are many great American 🇺🇸 companies that manufacture their flags & flagpoles in the United States of America. 🇺🇸🇺🇸🦅🦅

You all should look up the vids on people digging holes with a shop vac

Great idea... Go American !!

Could have used some silver spray paint

👍🇺🇸👍🇺🇸👍🇺🇸 GOD Bless America!!! Great job

Great Video. Thanks you for flying our flag. Maybe a Boy Scout Knot Tieing video would help the folkss who never learned or got the Badge

well done

I'm making an old-style colonial flag pole out of a walnut tree. I saw a video that informed of the flagpole knot. the knot tied is supposed to end up between the flag eyelets.

Very nice job bud, only thing I would have done a little different is when you cut the rope after measuring for the length, maybe burning the end as to stop it from fraying. Overall fantastic job.

Love and a lil red blood American hard work for something you love...amen to u brother...

Love that flag!

I gotta be honest... I would much rather have seen that pipe in the ground protecting some PVC. I couldn't think of a better alternative for it though. You have me wanting to jump on Amazon to buy a flag. Thanks for the vid.

I'm surprised you haven't yet made up a portable frame and rig, to use a lawnmower engine to power that auger, yet. :)

Nice work

Awesome!

Would been funny when digging that flag pole hole you struck water hey ha .....

Good choice of song :)

Beautiful

I made a similar one but 14 feet in length but 2 feet in the ground.

Haha there you go again digging holes xD God Bless America. And Gold Bless you and your family.

Where are you buying your flags at? Most American flags I’ve bought or seen are still made in USA.

Thank you and this is awesome! The back ground music is great! The one question I have is, where did you find the hand auger to make the hole? I borrowed one to put in fence posts and it was a life saver! I'd spent 2 days getting 1 1/2 holes dug for our new fence with the post hole digger due to all the rocks in our soil. Once I got the auger, I finished all the holes in a few hours! I've been trying to find one ever since! A link would be appreciated!

She’s beautiful ❤️🤍💙 USA YEAH!

God bless America

I cried a little!

Daymn bits I thought you were finna hit water or China one.

Coat of white paint and led cap light solar to light at night on amazon

So the cap is for decoration

Salute! Beautiful.

I like the idea and would like to do it myself ... what kind of material and what is the width of the pole?

Hi, I need to do this project as well, i am curious where you got a pipe for $15, that long? I checked the local hardware store and a 4ft pipe is $13. Also im thinking for those that dont have a tapping tool we can just have a nut welded onto the pipe itself. I guess it does not need a ground as it is its own ground.

Oh say can you see by the dawns early light what so proudly we hail and thetwilights last gleaming

👍💪

That tension will put stress on the flag which might rip it later