Тёмный

I Miscalculated Some Steps Installing the Side Boards | Engels Coach Shop 

EngelsCoachShop
Подписаться 213 тыс.
Просмотров 76 тыс.
50% 1

The challenge in these projects is looking far enough ahead to avoid setbacks and having to reverse procedures. I find myself faced with having to access bolts, but I can't get to them without removing some of what I have already installed. Thanks for coming along!
Spring for mugs, tee-shirts, sweatshirts and hoodies.
engels-coach-shop.creator-spr...
These are useful books related to the carriage and wagon trade.
Carriage Terminology: An Historical Dictionary amzn.to/2Hfoq4H
The Brewster Story - amzn.to/2wzrUNq
Practical Carriage Building amzn.to/3cJALfR
Wheel making: Wooden Wheel Design amzn.to/2TIxfK8
Carriage and Wagon Axles amzn.to/3aGDXav
An Interesting account of an early English Wheelwright Shop amzn.to/39sAICR
The Wheelwright Shop, in Kindle form amzn.to/3bxYOhd
The Twenty Mule Team of Death Valley amzn.to/3KJ4mXF
Around Boron amzn.to/3KZzwKx
Twenty Mule Team of Death Valley amzn.to/3EdzAUd
I like Makita Tools. I am not sponsored by Makita, I just like the tools.
I am a fan of the cordless tools and use many of them on our off grid farm as well as here in the shop.
These are all Amazon links and if you find them useful they can provide commissions for this channel.
Makita Biscuit Joiner - amzn.to/3OidpAa
Makita Biscuits for Joiner - amzn.to/3tFUNSK
Makita XFD12 cordless drill only - amzn.to/3m8lcBZ
Makita XFD12 package drill - amzn.to/2WiXwAB
Makita cordless circular saw - amzn.to/3tYTmyS
Makita Tower Work Light - amzn.to/3WmYt7o
Makita ½” High-Torque Impact Wrench - amzn.to/3GSwk2f
Makita String Trimmer - amzn.to/3ktJ1co
Makita 2 Gallon Wet/Dry Vacuum - amzn.to/3wgHuJk
Makita 14” cordless chainsaw with batteries - amzn.to/3knlhVi
Makita 16” cordless chainsaw with batteries - amzn.to/2UJDa5Q
Makita Cordless Multi-tool; amzn.to/3yhddeA
I have multiple Makita tools so I have several extra batteries
Therefore I bought this tool only option.
Makita 14” chainsaw as tool only - amzn.to/3khC9g6
I use Makita Cutoff blades amzn.to/39gln8f
I have several 4½” Makita angle grinders amzn.to/377snTp
My Makita reciprocating saw, 18v cordless- amzn.to/3YvziBc
I have several 7” Makita grinders amzn.to/3biF0hP
4½” Flap wheels amzn.to/386TyPy
My Makita cordless drill amzn.to/2OxQZ1e
My Makita 3¼” Electric plane amzn.to/2OBkVcV
My Makita Leaf Blower, revolutionized my shop cleaning amzn.to/2Uywh5d
My Makita ½” drill, very powerful amzn.to/377uEhp
#wheelwright #antiques #ranching

Опубликовано:

 

13 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 255   
@johnritchie3889
@johnritchie3889 Месяц назад
I love your constant little “stream of consciousness” narration. The one that goes on in my head has a lot more cussing.
@RobertFay
@RobertFay Месяц назад
*- 🤣*
@0r1x
@0r1x Месяц назад
Engels Coach Shop channel. One of the few on RU-vid that does not use every minute spreading manure but dedicates hours to building things that do. This channel is such an eye opener into old tech.
@Joserocha-wm9de
@Joserocha-wm9de Месяц назад
A real master isn't the one that never makes mistakes, it's the one that admits his mistakes 👌 Amazing job sir
@jonmccormick6805
@jonmccormick6805 Месяц назад
--- and knows how to correct them. I'm sometimes a little slow in that department.
@TCW-hw6iw
@TCW-hw6iw Месяц назад
I'm a former city boy who chose to live in a rural environment for the past 45 years. I don't ever recall a prettier manure wagon than this one. I've very much appreciated this build, much more than the sheppards wagon, maybe because your doing this for yourself not for others. Pride of workmanship shines through on it all.
@howardnielsen6220
@howardnielsen6220 Месяц назад
Dave needs to show off his Manure spreader at the county fair it’s beautiful to nice for its intend it work
@harleyb.birdwhisperer
@harleyb.birdwhisperer Месяц назад
I never thought I would say I’ve seen a manure spreader I could eat my lunch off, but here we are.
@shawnaweimer3658
@shawnaweimer3658 Месяц назад
As a retired mechanic, I can appreciate the " where did that blood come from ?" comment.
@dan3460
@dan3460 Месяц назад
"Working like a racoon", you should put that on a t-shirt.
@alsatful
@alsatful Месяц назад
Reverse engineering can be brutal and you handle it like a master
@norduferhandel4512
@norduferhandel4512 Месяц назад
It's more than reverse engineering. 21:14 Dave's rebuilding this spreader from a pile of rotten wood scraps and a barrel of rusty cast iron. Hats off to Dave for his ability to rebuild this jigsaw puzzle.
@WarblesOnALot
@WarblesOnALot Месяц назад
​@@norduferhandel4512 G'day, Yay Team ! My father was an Engine Reconditioner, had his own Crankshaft Grinder in 1948 & it was the only one gor 300 miles, he'd started at 14 working for his father who was a Wheelwright that bought a Coachbuilding business in 1919... Dad reckoned that a Blacksmith-Mechanic to working in Regional areas had to be be a lot smarter than the University trained Engineer...; because when the Engineer's mass-produced Work failed to cope with real-world operational use and broke down - it was the Backwoods Repairer who had to figure out how to get it apart, diagnose what went wrong with it from the broken remains, and then come up with a way to repair it. And the Repair not only had to be effected using the Materials and tools already to-hand, and the Fix had to rectify the Universuty-educated Defect which caused the failure - so that the Customer Remained happy after having paid to have the Citibred Wannabe's Mess cleaned up, and made to become actually Functional... (!). Chalk it up to the great City/Country Divide, I suppose ; both sides like to feel superior. Like the Citibreds who point at the high income jobs they all compete for, disparaging the Hillbilly Lifestyle...; whereas the average Hillbilly knows that the ONLY actual "Reasons" to Abandon one's own Home Country, and Run away to the Bright Lights, looking for work ; Involve having gone into Unrepayable Debt and lost one's Land, after having flogged it so hard that successive Crop-Failures forced the borrowings - and being unable to find any lawful source of income, where they were bred, born & raised to fit in..., or having done something if which one is ashamed and wants to run away from the social consequences thereof..., or one is fleeing violently overcontrolling manipulative it abusive families...(!). So the Citibreds talk about how very superior is their lifestyle, While The Hillbillies and Hicks and Hayseeds, the Rednecks and the Bogans all Know Better than that... Because they Didn't have to run away Moving seven times every generation, Fitting in..., Nowhere at all, not anywhere on Earth... And when their Grid falls down, and stays down, the CitiZenry Is then Compost On the Hoof. Apparently. The further away from the Cities one lives..., the longer one may hope to persist, afterwards ; in my view, at least. I love the fact that Dave & his brother in law have made their livings since the 1970s, ministering to Animal-drawn Vehicles... It's almost enough to make me try to put together a Team of Harness-trained Emus, to pull a Trotting-Cart into town & back for Groceries (lol !). Such is life, Have a good one... Stay safe. ;-p Ciao ! Such is life
@PendeltonWhiskey
@PendeltonWhiskey Месяц назад
The worlds most beautiful manure spreader gets more beautiful every day
@frankreidy5881
@frankreidy5881 Месяц назад
‘We are gaining’ - great patience and flexibility - problem solving at its best
@horatiohornblower868
@horatiohornblower868 Месяц назад
No computer can beat Cardboard Aided Design!
@VAXHeadroom
@VAXHeadroom Месяц назад
I sense you might be a fan of Next Level Carpentry...
@enclosingthefield
@enclosingthefield Месяц назад
to reinstate the slats why not rotate the slat bed until the slats are on the underside; you appear to have some slack in that chain which gives you acees to both sides to fix the slat bolts back on.
@keithmagoon6405
@keithmagoon6405 Месяц назад
You just need some dowel centers to put in the frame holes, set the upright where you want it and tap it and you have your holes all marked
@DefaultName-vh3lo
@DefaultName-vh3lo Месяц назад
My thought when you were “trying” to find the holes from the inside out!
@harrywagner3877
@harrywagner3877 Месяц назад
Rotating the slats to get clearance for drilling the lower side boards is pure genius & experience speaking. I'm sure I would have removed more slate to get access. It's that type of thinking & analysis that makes watching you work pure gold !
@dragchute1
@dragchute1 Месяц назад
I was thinking the very same thing. Watch and learn.
@davemanley2954
@davemanley2954 Месяц назад
Holy crap - you have the same 1975 “montgomery ward” jigsaw I have 😂 We both need a new one! ! I bought mine with “green stamps “ when I was a kid.
@jcevans6934
@jcevans6934 Месяц назад
Get a cordless one - Makita do several great 18v ones with tool-less blade change - oh, and treat yourself to some decent blades
@kennethdavis9987
@kennethdavis9987 Месяц назад
More than likely the slats and chains were assembled all but one or two on a flat table. Then threaded onto the rollers and and finished off like a bicycle chain. What a project!! Looks amazing.
@PendeltonWhiskey
@PendeltonWhiskey Месяц назад
I don't understand why I'm so excited about this particular project - but I am!
@Mangsaab1954
@Mangsaab1954 Месяц назад
Bright colours inflame men's passions.
@aserta
@aserta Месяц назад
I can't wait to see this move. Maybe not spreading ... pebbles... but at least pulled behind something to make sense of the whole machine. I've pretty much got it all, but you can only be sure when you see it. Regardless, this is quickly shaping to be, one of my favorite builds on the channel. The mule team monsters were amazing, but this is just special ... for some reason. Haven't yet figured out why. Very cool as a history piece regardless.
@tomtruesdale6901
@tomtruesdale6901 Месяц назад
That spreader is coming right along. I am very impressed with your ability to look at a problem and then solve it. The fact that you will rotate the slats around to be able to use the opening you created for multiple tasks is proof of your knowledge, skills and abilities.
@terryrobinson1416
@terryrobinson1416 Месяц назад
It's not absent-minded, it's just prepping for the final coat.
@kirkpowell6161
@kirkpowell6161 Месяц назад
The disadvantage of doing a one-off project. Imagine how much easier the next 5 would go now with the new education you have! Another great video!
@robbobsjobs8456
@robbobsjobs8456 Месяц назад
I said out loud I would love to build a stagecoach, and then a few days later your channel is recommended. I'm not mad.
@davesimmons8640
@davesimmons8640 Месяц назад
Welcome to my world. Seems like no matter how simple the project I'm trying to accomplish, I always find myself hanging upside down trying to work behind my back, left-handed, without being able to see what I'm trying to do. I feel for you, Dave. I've been there.
@jrleininger4110
@jrleininger4110 Месяц назад
Very true!
@TheRealGeewizz
@TheRealGeewizz Месяц назад
I had to go back and check I hadn't imagined you putting the pencil through the hole before you went off and got a pointed bolt and a hammer to mark where you needed to drill.
@prototype3a
@prototype3a Месяц назад
You should add a set of transfer punches to your toy box. Technically, a machinist tool but they're super handy as a woodworker.
@glensmith766
@glensmith766 Месяц назад
A tool that Dave doesn't have, but can make when he needs one - a set of transfer punches. Harbor Freight has a pretty cheap set that will do what you need. Fascinating work as always.
@donwilliams3626
@donwilliams3626 Месяц назад
I really like the way Dave ground the point on the bolt to make his own transfer punch. It seems much more period correct.
@ClydeDCamel-mv6ml
@ClydeDCamel-mv6ml Месяц назад
This spreader is one crazy jigsaw puzzle. Not only do you have to put it together, you have to make the pieces first.
@elvinscott2356
@elvinscott2356 Месяц назад
So dispite the rumors and the evidence we see each section, YOU ARE HUMAN.
@aserta
@aserta Месяц назад
Nah. That's just the exception that proves the rule. :))
@Mangsaab1954
@Mangsaab1954 Месяц назад
Mustie1 has a saying , "we do it right 'cause we do it twice" . Even a mechanical genius makes a blue occasionally.
@quinntalley1681
@quinntalley1681 Месяц назад
Getting those uprights on looked as hard as puttin' socks on a rooster! Nicely done!
@harleyb.birdwhisperer
@harleyb.birdwhisperer Месяц назад
Title this segment “Dave being mortal” - undoing done stuff, getting paint on his fingers… Makes me feel not so bad. Thanks.
@mayforddavis9291
@mayforddavis9291 Месяц назад
Master magician. It is a pleasure to be invited on the journey. God Bless you and Mrs. Engels.
@rodurquhart7395
@rodurquhart7395 Месяц назад
Love watching a Master at work.
@robertbreland4356
@robertbreland4356 Месяц назад
Problem solving is a virtue. Well done my friend..
@BillOwens-vt2wi
@BillOwens-vt2wi Месяц назад
Your not alone in getting ahead of your self. But nice workmanship. Project is looking very good. Hope your having fun we sure are. Thank you !
@davidg5369
@davidg5369 Месяц назад
Problem solving at its best... old school! Nice solve!
@olddawgdreaming5715
@olddawgdreaming5715 Месяц назад
Where there is a will there is a way , think about it and work it out before hand . You have taught that lesson well Dave. It's getting closer to "GIDDIE TIME" and being done. Keep up the fantastic build you have managed again. Thanks for sharing with us. Fred.
@brianmros4844
@brianmros4844 Месяц назад
Hi Dave, and Diane, always something, but always a solution as well. Not a big deal for a professional like yourself. I've seen you pull through much worse. This is looking so nice. Thank you for sharing, and take care.
@rogerkincaid4535
@rogerkincaid4535 Месяц назад
You always seem to come up with a solution. Always enjoy your videos and learn a lot.
@Joe___R
@Joe___R Месяц назад
In the future, if you need to align holes, you should give dowel transfer plugs a try. They go into blind holes and give you a center point when you put your board on it and give it a light tap. They make them fit into various sized holes with a small flange, keeping it from going far into the hole.
@rickcline2762
@rickcline2762 Месяц назад
I love the way that you always square the nuts with the work if possible. Who else thinks of things like that?
@andrepienaar6459
@andrepienaar6459 Месяц назад
I read in a site on facebook called 'Golden Old History' about a 'hoodlum' wagon, which was also called a bed wagon. It was watched over by the hood. This wagon was used to ease the load on the chuck wagon and also carried additional items like fence poles, ammunition, tools, etc., and was also used by the cowboys to sleep in. I've never heard of a hoodlum wagon and it was interesting to read about. This must be where the name hoods comes from for the the crooks in the mob movies.
@aerialrescuesolutions3277
@aerialrescuesolutions3277 Месяц назад
Well done. I love the pointed bolt to mark the locations. Thank you.
@pat36a
@pat36a Месяц назад
Had a giggle moment , all your new Makita tools, and then you bring out an ol' aluminum body jigsaw. Makita needs to step up. Side note. It's sad. Had a cousin that was shocked at work with an aluminum body drill. Someone had broken the ground prong off the extension cord he was using. The drill shorted internally and passed through him , shortest path of resistance. It didn't kill him , the fall off the scaffolding did that.
@Tonvanis75
@Tonvanis75 Месяц назад
*Sir, you amazed me with every project that you shared. Thank you so very much.*
@joeopel4196
@joeopel4196 Месяц назад
Hello This is only the second time I have commented to a RU-vid channel. Knowing right from wrong is no longer taught to the younger generation. Knowing you needed to paint the vertical backs, and after your usual conflict in your head you remembered, knowing what's right and doing what's right are two different things!!!!!!!! Please, keep doing thie right thing as this is what a true Craftsmans product elevates above others who,are still stuck only knowing what's right but.......... Please maintain your level of a Craftsmanship and let's enjoy your builds as we have become use to. God Bless
@dianeengel4155
@dianeengel4155 Месяц назад
Thank you.
@raymondhorvatin1050
@raymondhorvatin1050 Месяц назад
Thanks for sharing sometimes it’s one step forward and two steps back but it’s looking good
@barrylitchfield8357
@barrylitchfield8357 Месяц назад
I feel very sure you'll get it all just the way you want it to be. I don't have your patience to do what you do. You do wonderful work, no matter how difficult it is!! 👍
@marlinkojak9882
@marlinkojak9882 Месяц назад
thanks Dave been waiting as you move along on this project
@mfreund15448
@mfreund15448 Месяц назад
Happy Tuesday Dave and Diane!!
@dianeengel4155
@dianeengel4155 Месяц назад
Thanks. Same to you!
@cowdoc123
@cowdoc123 Месяц назад
Once you get the manure spreader restored, I would love to see you review it and tell how you would have tweaked it for improvement. I know you have been thinking of those things. Would be another great insight into your thoughts and creativity. BTW, I’m glad that you have reached a point in life where here you are building for yourself, as well as others. You earned that luxury!
@Hertog_von_Berkshire
@Hertog_von_Berkshire Месяц назад
Can only imagine that the same kind of process was followed back in the day when the original was prototyped; and thereafter, for production, they would have pre-drilled all the holes in the side boards from one or more templates.
@jimdee5003
@jimdee5003 Месяц назад
Excellent fitment and beautiful to watch. Love your patient fruit of the spirit.
@user-px4xf5hu9w
@user-px4xf5hu9w Месяц назад
As usual you are doing a great job. Thank for letting us watch.
@alfredomarotta6604
@alfredomarotta6604 Месяц назад
Thanks for sharing Dave and Diane, coming along nicely. See ya next week.....God willing ✌️
@mikewatson49
@mikewatson49 Месяц назад
Really appreciate you taking time to put these videos up. Its inspirational
@stg6186
@stg6186 Месяц назад
A little frustration makes the job more satisfying at the end ! Great video as always. Thanks.
@donwilliams3626
@donwilliams3626 Месяц назад
Thanks for demonstrating the clever solutions you develop to conquer engineering challenges you discover along the way.
@stevespangler6042
@stevespangler6042 Месяц назад
Dave, your patience is inspiring. Such quality workmanship. I enjoy watching a master at work. Thanks
@therealzilch
@therealzilch Месяц назад
I'm a musical instrument maker, specializing in bows for violins and other strings, and repairs. My scale is thus much smaller than yours. But the problems are very similar, and the miscalculations also. It's wonderful for me to see the same kind of reasoning in a rather different field. Great work, sir. Lunch is on me if you're ever in town. Cheers from sunny Vienna, Scott
@johncrisman576
@johncrisman576 Месяц назад
5:39 that was a saw from the 70s based on shape and color. Love it!
@ddblairco
@ddblairco Месяц назад
beautiful knot free wood!
@andrewjones1649
@andrewjones1649 Месяц назад
Dave. Your motto should be... The difficult I do immediately. The impossible takes a wee bit longer. 😊 Happy Tuesday.
@patrickshannon4854
@patrickshannon4854 Месяц назад
Good thing you've got 2 projects going. You can take a timeout & cogitate. (ruminate?)
@user-dy9qb9dz6i
@user-dy9qb9dz6i Месяц назад
Persistence is a virtue well worth cultivating, or in this case spreading.. lol another great job.
@johnwest9786
@johnwest9786 Месяц назад
Pretty impressive use of the hammer in the blind. One ATTABOY
@richardsurber8226
@richardsurber8226 Месяц назад
Thank you Dave for showing this part
@TheUncleRuckus
@TheUncleRuckus Месяц назад
Well at least now that you have those two boards removed from the conveyor belt the second side should go on a lot earlier as you can now position the open spot in the belt over the spots you need to work to mark the holes. I am a little surprised you didn't just take a Carriage Bolt and sharpen the tip to a point and use that as a transfer punch to mark the uprights. Great video as always! 👍👍
@steveshoemaker6347
@steveshoemaker6347 Месяц назад
Thanks Dave..... Old Shoe🇺🇸
@rodneywroten2994
@rodneywroten2994 Месяц назад
it is beautiful
@Myrune1
@Myrune1 Месяц назад
That spreader is a work of art.
@stephenrobb8759
@stephenrobb8759 Месяц назад
A master level 3D puzzle it is.
@graemelliott3942
@graemelliott3942 Месяц назад
She’s coming along nicely ❤
@natwooding9394
@natwooding9394 Месяц назад
I haven't looked to see whether someone else has said this but a machinist would call the sharpened bolt a "transfer punch" and they have sets of these to match drill sizes. Great thinking!
@leslieandrews6324
@leslieandrews6324 Месяц назад
Looking good
@ferguscosgrave7510
@ferguscosgrave7510 Месяц назад
Nicely done
@michaellinahan7740
@michaellinahan7740 Месяц назад
an old trick is to use a piece of paper lined up with the bottom frame and poke holes in the paper using a pencil to get the location of the holes also drill the holes in those upright frames a little large, the squaring up can be done when tightening them.
@waynespyker5731
@waynespyker5731 Месяц назад
They call it a spotting punch in machine shops.
@richardormrod5758
@richardormrod5758 Месяц назад
looking good Dave really liking this machine till the next one thanks Ric
@user-bc6wi6zy3k
@user-bc6wi6zy3k Месяц назад
That's the pitfalls of reverse engineering Dave. but you nailed it, well, bolted home that is. MB.
@milt7348
@milt7348 Месяц назад
Stay safe and we'll see you next week.
@WarblesOnALot
@WarblesOnALot Месяц назад
G'day Dave, Great stuff ! "Building a Boat in a Basement..." ; That's a new one on me...! I've seen a few photo's of people extracting homemade Aeroplane Fuselages & Wings, full sized..., by putting them out a dismantled Window from the Bedroom they'd been glued up inside...; sometimes coming out several Stories off the ground. Perhaps the funniest was my ekdest Broher in Law, a Master Carpenter & Housebuilder, who designed & built a Baby's Cot from Australian Hardwood for my Neice, and he assembled it inside the Bedroom. When the daughter outgrew the Cot it had to remain insitu because it was too big to fit through the door - and too strongly built to take apart. 25 years later, when he sold the House he had to remove the Window and use a Crane, to extract Caryn's Cot ; and then replace the Window and framing... He also designed his next house, which featured double parallel Hallways (one Hallway is a waste of space, costly to build, costly to heat & cool, and nobody ever lives in a Hallway...!), and sunlit double-brick Feature-Walls aligned North/South, staggered in the Living Room with both opposite double sliding Glass Doors (on East & West Walls, collecting early morning & late afternoon Sun and capturing it's Heat, at Grafton, 30 miles inland at the Coast, 30° South of the Equator where no heating is ever required...(so forever after they lived behind drawn curtains wuth the Lights on, in daylight !). But the funniest sude was that he was sinking some "hot money" into the House (cash in hand, untaxed weekend work for decades ?), so he bhilt ut with all walls being Double Brick, full-cavity type ; abd after pulling the Cot out the window of his first house, it turned out that he then had to cut & shut all the Beds to fit them into the Bedrooms - because he'd failed to allow for Wall-thickness when measuring his Pencil-Lines on the Plans. And the Beds would not fit into the Bedrooms whichever way they were aligned. My father and brother had gone down to assist with the move, and they were still laughing about it 98 miles later when they arrived home atop the Mountain. You extracted your Boat from the Basement very well indeed, I thought. Kerp on keepin' on. Such is life, Have a good one... Stay safe. ;-p Ciao !
@alexanderginter7752
@alexanderginter7752 Месяц назад
Сколько смотрю, не перестаю удивляться Вашему подходу и умению найти нужное решение к поставленной задаче!
@cndream1
@cndream1 Месяц назад
Use a transfer punch to locate your holes from the back side
@bogartaspen
@bogartaspen Месяц назад
Hi Dave: Greetings from Colorado. When this spreader is finished it will be way too nice to spread manure.
@Edgeair
@Edgeair Месяц назад
Thank you.
@wileycoyotesr8623
@wileycoyotesr8623 Месяц назад
Have you ever built a more colorful wagon? It's a beauty! 👍👍👍
@stephengile530
@stephengile530 Месяц назад
What you made with the carriage bolt is what machinists call a transfer punch. They come in sets of all sizes.🧐
@snchilders
@snchilders Месяц назад
Dave, you'd have made a great aircraft mechanic. I've removed many engine parts that I didn't know what they looked like until I got them off where I could see them.
@richardedkins8856
@richardedkins8856 Месяц назад
I continue to marvel at your skills.
@aserta
@aserta Месяц назад
You know, i'm betting they put the slats on just like you'd put a tank track. After, the machine was completely built. In a single man operation, this makes no sense, ... but the OG shop that created this machine wasn't a one man band. At least three people would've been available or more, and that's enough. You'd roll it on top, two would unroll it and another would feed it, using perhaps rope. I'm not 100% sure, but it would make sense from a certain point of view, having full access to the whole machine before putting the slats/track on. Just a though, i may just as well be wrong.
@davepeugh
@davepeugh Месяц назад
Why not turn the missing slats to the bottom for final assembly? You will have easy access to everything then. Love your bi-weekly content. As always, true craftsmanship.
@billschmitzer9159
@billschmitzer9159 Месяц назад
I’ve been in that exact same situation. Patient is the key to success. Nice job Dave.
@paulsimmons9579
@paulsimmons9579 Месяц назад
I never thought i would be this interested in a manure spreader. Ive restored a few cars over the years, and i know all too well about taking taking 2 steps forward and 1 step back. It happens.
@tomt9543
@tomt9543 Месяц назад
I’ve run into that situation before and solved it by using the appropriate size dowel centers in the holes, (they insert from the front) sticking a guide board to the sill with double sided tape (the good stuff!) to put the standard against to keep it square, and tapping the standard with a hammer to leave 2 center points. The centers are very inexpensive, and I keep several sets on hand! Loving this build!
@jeanhawken4482
@jeanhawken4482 Месяц назад
Looks so good
@winstonsmith9740
@winstonsmith9740 Месяц назад
I love your "can do" attitude Dave. That philosophy is an inspiration to many.
@flywayhome8903
@flywayhome8903 Месяц назад
Once again thanks for the video, Roll the chain around till the missing slats are on the bottom in the middle of the spreader , easy peezy
@legend7ify
@legend7ify Месяц назад
.................G'day Dave, I'm loving the progress mate. Cheers and God bless. Malcolm
@jockcherokee5180
@jockcherokee5180 Месяц назад
Another informative video Dave. Always look forward to these. I find myself looking at old farm wagons & horse drawn machinery differently here in the UK. Stay safe & well.
@bobthesnowman8929
@bobthesnowman8929 Месяц назад
Looks great Dave.
@jillatherton4660
@jillatherton4660 Месяц назад
Gripping stuff, with logistics and sums! 😄👍
Далее
Farrier-Hoof Restoration-Satisfying
16:02
Просмотров 74 млн
1❤️
00:17
Просмотров 9 млн
СПРАВКА ДЛЯ УНИВЕРА
00:44
Просмотров 372 тыс.
Bending a 2.5m Curved Oak Roof Beam
29:40
Просмотров 263 тыс.
Planting Potatoes! 1200 acres in 7 days!
30:12
Просмотров 257 тыс.
1❤️
00:17
Просмотров 9 млн