I NEVER Thought This Paint Trick Would Work Until I Tried it Myself!

Подписаться 566 тыс.

Просмотров 155 тыс.

50% 1

In this episode we reveal trade secrets I use everyday to get clean spray jobs. There is no money in buffing cars and the best way to get a clean spray job is to prepare the surface properly. In this video I will show you the quick tips you can start using right away and see big differences on your project!
BUY THE OFFICIAL PAINT SOCIETY Paint Suite!: amzn.to/3qlkVUs
🟢🟢CHECK OUT OUR ONLINE STORE🟢🟢www.amazon.com...
🔺🔺SHOP ALL Exclusive Products found on our RU-vid channel for your project! 🔺🔺
Products in this video:
Sagola 4600 Digital Xtreme DVR Clear: amzn.to/41bEUCk
DV1 Base Gun: amzn.to/44ehxJv
Air Cap Options: amzn.to/3UHgH4a
Fluid Tips Options: amzn.to/43CDi68
Clear for at Home or Production Shops:
FC720 Gallon: amzn.to/3hQ7rM8
FC720 Quart: amzn.to/3vfFBfo
FC710: Gallon: amzn.to/3PVh0pB
FC710 Quart: amzn.to/3WMJaWm
Other Supplies:
Blending Additive: amzn.to/3C8GCtQ
Degreaser: amzn.to/3TcndP7
Astro Sunlight: amzn.to/3NrI3HZ
Paint Gun Cleaning Kit: amzn.to/3qZ4dXM
Gloves: amzn.to/3R9C9eW
Gun Cleaner: amzn.to/3LDv2tW
Water Cleaner: amzn.to/3Budv2V
3M Soft Saning Sponge: amzn.to/3uX6yV0
Prep Cleaner: amzn.to/3fZ2KPn
Tolecut Sanding Dirt Nibs: amzn.to/3PFDcEm
Griots Garage Polisher: amzn.to/3jeim2p
Milwaukee Mini Buffer: amzn.to/3G28ORm

Авто/Мото

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 297

@rafaelvega918 Год назад

Hands down one of the best painter channels 🙌🏻

@speedokoterefinishnetwork4937 Год назад

Agree!

@PaintSociety Год назад

Wow, thank you!

@davidpetrus1748 Месяц назад

nice video i hope any newbies can grasp how important it is to have your base lay on flat i had many paint jobs shrink up on rocky looking base and never understood why it was dulling until i understood years ago that it was my fault for not putting down the base slick like you do

@anthonyburns1412 2 месяца назад

Brian u a maestro I'm a cancer patient and learning a lot from u awesome pity we can't get those good results gun only the cheaper hopeless ones

@midas7394 Год назад

Thanks for highlighting how important it is to get paint viscosity, air pressure & reducers properly set up as part of the spray process. Thanks for sharing.

@MaNuLaToROfficial Год назад

You got that distance and fluid motion locked in!

@Whateva67 Год назад

Just dropped off my black 01 Honda Prelude yesterday to got the whole front end repainted. Rock chips on bumper and hood and clear coat fade on both fenders. They’re going to remove mirrors and window trim to blend the doors into the rest,hopefully it works good. Hello from British Columbia

@dewholdingsllc1050 Год назад

Thanks for the content. I have a long time client and I was thinking about asking him to help with my classic car projects but I can see watching your content how he doesn’t prep correctly and he has his helpers buffing and buffing 15:12 to clean up the cut corners of proper prep.

@justinshields4216 Год назад

Absolutely amazing job as always Brian! Thank you for taking the time to teach us all the tips & tricks that could result in very time-consuming & costly errors!

@volodyn7151 5 месяцев назад

Excellent job, Brian. Do you have a video on refinishing used front bumper with many tiny chips???

@DJJDSKREWED Год назад

THANKS FOR ALL THE HELP YOU INSPIRED ME TO DO MY OWN PAINTING LOL I DONT EVEN HAVE A BOOTH AND THEY TURN OUT DECENT!

@luxe-kustoms Год назад

Brain killing it again! Love my Sagola's! Great guns for sure!

@lisihoxha7388 Год назад

You are the most Amazing person I ever Know ...... GOD BLESS YOU and your Family

@CorvetteCarCraft Год назад

Thanks for the calculator trick, I never thought about it to divide by ten

@joehovanec1985 Год назад

Brian, for somebody that keeps saying, don't over think it, it's just paint. You certainly do put a lot of thought into painting, which is a good thing. How can you keep improving without thinking. I enjoy your videos. Thank you for sharing with us.

@PaintSociety Год назад

Sometimes when we are in the thick of things while painting we are trying to over analyze. At paint society I do the thinking for you so you don’t have to! 😇

@NjBoriG35 Год назад

U put this video at perfect timing.

@devronscott8894 Год назад

400, 600, 800 wet sand! is what I did, and finally had a paint job come out clear, clean, smooth.

@CUSTOMWORKS7.3PSD Год назад

I recently bought a conversion from 1.4 to 1.2 for my gun and wow super better paint jobs

@jags01071 Год назад

One of the things to help with getting a clean paint job that most painters never do is clean the air hose in the booth.

@themetalfusionologist Год назад

That run down the rear door would’ve been where I made waterfalls

@user-un5my5bw4j Год назад

Anytime i am doing a gloss black weather its jet black, Mitsubishi Labordor black (with the real fine blue metallics in it) or Toyota Tripple Black, i always spray the base, then i let it sit overnight, come in the next day and lightly block sand with 600grit, tac it off, then hit it with another 2 coats of base then go right into clear. Thats just what works for me personally. Even with Tamco Smoke Metallic or Urechem Tihation Black Pearl (two of my favorites) just makes me feel as if i get a much cleaner finish

@PaintSociety Год назад

If you have time that’s a great way

@USCG.Brennan Год назад

When you use extra slow reducer your paint & clear dry slower which increases the amount of dust that can settle on the project.....just saying.

@tonydiesel3444 Год назад

All fast 4 me

@jonahstoyroom7516 Год назад

Depends on temperature and humidity. If its 100+ degrees. Slow works nice

@USCG.Brennan Год назад

@@jonahstoyroom7516 I won't paint if it's 85 or above....even with slow dry. Just too warm and moving around so much in my booth creates all the more temp and SWEAT. ;-(

@mrhow2712 Год назад

Awesome 👍 I've learned a lot from your videos Thanks for the great tips Sensei

@anomalous9448 Год назад

Got to thinking……..I have 20 year old single stage paint that is in pretty good condition. Can (should) I squirt a clear coat over it?

@philtucker1224 Год назад

Nice job Brian, thank you!👍

@PaintSociety Год назад

You are very welcome

@V1CSTAA Год назад

I love learning

@santosbanuelos6661 Год назад

Thank you

@cmlilfry Год назад

What size tip did you used in that clear gun ?

@LarryModean-dp2rd Год назад

Thanks

@gjkrisa Год назад

My local shop loves to scratch the fresh clear coat. I think it’s to match the rest of the car I told them there is no need to the last time and they still did it. They told me the clear was still a little soft so to bring it in in a month and they would buff it. Shouldn’t need it right?

@stanwardoshiro Год назад

How do you measure cap pressure for HVLP guns? Data sheets for the primers I use specify air cap pressure for HVLP guns.

@PaintSociety Год назад

Don’t measure cap. Ignore that. Just use a pressure that works

@marcuswhite1403 Год назад

Great job, only one piece of trash in it. I always struggle with getting clean black jobs. I also hate buffing black.

@PaintSociety Год назад

It’s the worst !

@marcuswhite1403 Год назад

@@PaintSociety 😭😭😭

@spraym88 Год назад

I noticed your using a Microfiber cloth to clean the panels? What are the benefits in this technique & what type of micro fiber cloths? Thanks

@PaintSociety Год назад

Glad you got the answer. Was just about to respond to your other comment

@spraym88 Год назад

@PaintSociety Thanks so much man. Do you just REWASH them? Your Content is the best! Very informative as always!

@bp7178 Год назад

What do you use to degrease and clean just prior to spraying? I tried lacquer thinner, but it affected the primer, as in removing some. Also what towel? I tried the paper blue shop towel with some rubbing alcohol but they kept depositing lint, which I got off with a low tack rag, but it was a pain.

@PaintSociety Год назад

Super clean with water before it hits the booth. Micro fiber towels for cleaners in the booth

@bp7178 Год назад

@@PaintSociety What cleaners in the booth?

@jordanbest3926 Год назад

@@bp7178he literally tells you in the video…

@bp7178 Год назад

@@jordanbest3926 least helpful answer award…

@SteveBennet500 Год назад

Customer: one piece of dirt? I'm not paying!

@cwhunter7127 Год назад

Hey Brian, great video! How does that Sagola stack up against the ws400. Been using one for years and Sagola has my attention. Thank

@PaintSociety Год назад

Finding the Sagola is easier to setup

@noi5emaker Год назад

@paintsociety - Brian, would this trick of thinning by another 10% work for 1K as well as 2K? I presume you're using two pack paints. Do you also thin down the clear coat?

@D.W.e.s.t. Год назад

Technically weight and volume is different.

@Mu5cle55 Год назад

Hey Brian I’m doing a complete paint change on a truck, from dark blue to black. I am doing the engine bay and door jams. Is it the same process of sanding to 220 to remove clear, unless the clear is failing and get to base. Then primer with 2K up to 600? Or should I sand the primer to 800 before base and clear?

@johnnyshd8250 Год назад

It is not necessary with a solid color. 600 works well.

@scotthewins5341 Год назад

Should you add 10% reducer to the clear too?

@johnnyshd8250 Год назад

No. Follow the direction for that clear. If you reduce, you could end up with solvent popping.

@Murderthefinish Год назад

Having trouble blending? youtube.com/@Murderthefinish

@jarm6862 Год назад

Brian nuke it off and hop in to a cruise ship 🚢 is waiting for you 😂

@mikesrestoration Год назад

slicker than cat puke on linoleum !

@kevinkev1530 Год назад

👍🏾👍🏾👍🏾👍🏾

@jimmycocks Год назад

Good video man. Like that tip to throw a quick effect clear coat on the plastic surround 1st if car has to go and u may have concerns about booth or environment. I know you don't shoot many satas but I'd be curious on your take on the 5500 I and o. If you don't have maybe u can get a demo. Imo dialed in they work well esp the I with a hs clear

@HackMasterBlaster Год назад

Sata is a fantastic gun. My only beef with them is that they are very overpriced.

@jimmycocks Год назад

@@HackMasterBlaster agreed. Nonsense msrp and nonsense when u need parts. Overall the other manufacturers are catching up tho-a 4600 sagola w the gauge thru finishmaster is 9 bills...prolite or the tekna base is 7...wtf. just sayin, imo, 5500 corrected alot of issues that pissed me off in the past. No more plastic air distribution ring that cost like 60 bucks. Imo the o is a better 5000 and the I is an old school iwata 400 on steroids

@PaintSociety Год назад

I ended up selling my sata because it just doesn’t fit my spraying style. I use to get a lot of runs with it and haven’t bought one in years. I really am liking sagolas. They have just the right amount of speed

@jimmycocks Год назад

@@PaintSociety fair enough. They do spray heavy.

@HackMasterBlaster Год назад

@@PaintSociety I approve this message 👍🏻👍🏻👍🏻 really can’t go wrong with the sagola. I have the 4600 extreme for clear and it is an absolute beast of a gun. And reasonably priced.

@landondavid5773 Год назад

I know you still buffed that shît for good measure 🤪

@PaintSociety Год назад

I sent it out. No point touching black with a buffer for one tiny dust nib

@wildestcowboy2668 Год назад

He's another chip foose this guy could paint a car with a paint brush and make it look good.

@keith.kccawley1677 Год назад

I forgot to mention that I cut all base a hair under a 1/4 of a part more

@keith.kccawley1677 Год назад

because I use med reducer for everything

@Cultofpersonality09129 Год назад

99% of a good paint job is the prep. Spraying is the easy part.

@eastcoastken Год назад

So glad you said the customer was only paying for a blend panel. So many keyboard warriors out there knocking people about not doing more work than what they are getting paid for. Turned out awesome as usual and im painting my Del Sol tomorrow black so it was very helpful.

@glennnickerson8438 Год назад

As a Dupont paint rep told me yrs ago--If you're going to have an issue with a paint job, It's going to be black! It shows everything and when you get it outside the surface will absorb heat more than any other color with the potential of a chemical reaction. Nice work Mr. P. Society!

@PaintSociety Год назад

Love and hate relation with black paint hah. Thanks !

@HowtoRestoreHeadlights Год назад

Mr P. Society? I dig it!

@juanc3507 Год назад

Learned that the hard way 🥹

@plowmaster1206 Год назад

.... and red is the hardest to match and quickest to fade. I think this is why most fleet vehicles are white, def easiest color for a vehicle

@chuckster243 Год назад

The way I look at it, the paint work showcases your repair work, prep work, attention to detail (how does that go, the devil is in the details), and talent. And, the most important part, whether or not you strive for continuous improvement, and an endless journey for knowledge, or if you embrace "satisfaction", the end of your journey. I think black provides the ultimate learning opportunity, there's nothing that teaches like mistakes. Get black right, and you can most-likely get anything right.

@lohikarhu734 Год назад

super tip about tacking the plastic... if you think about it, the plastic almost always has some static charge, and holds onto more duct that we think...thanks!! I was surprised at how much 'fog'/overspray seems to drift away...is this a big problem for a 'hobbyist' painter...I have HPLV guns...

@oznetyoutube125 Год назад

Not just sweet production technique, so much insight for home garage guys as well. Brother, I literally thought paint was magic until I started watching your work. TY for sharing this digestible high-quality knowledge.

@PaintSociety Год назад

I’m glad you can carry some of these tips into the garage at home. Thanks so much for the comment

@richardholt9170 Год назад

I feel like I'm watching impractical jokers? Your not single have three cats and live alone? P.S thanks for the tips.

@MaNuLaToROfficial Год назад

10:00 WOW that looks freaking amazing!

@allan8004 Год назад

As an old veteran painter "coach and motor painter" to be technical, I have noticed 2 alarming things about your technique that I must say are a little concerning, for me anyway, That gun set up seems to be atomizing way to much, and your "stroke action "or arm action does not have any wrist movement, something that is essential for evenness of cover and eliminates dry spray, especially on final coats, but this time you covered it by going back and finishing the edge, nice job in the end, All the best, Al

@hasanalsaimari223 Год назад

I always put masking paper around the edges of plastic , cus sometimes the clear flakes off when air hits the plastic so I put paper to absorb it

@PaintSociety Год назад

It should never because one side of the plastic is treated

@nickcrill7718 Год назад

I love your videos! I’m stuck in prep and paint sometimes but I’m 23 and want to paint! My dads a painter but different field of painting. Your videos help me a lot and when I use the info I learn from you it impresses the lead painter who’s been doing collision work for 28 years. Thank you. Would love a review on the sata 5500 rp it’s what is used at my job.

@PaintSociety Год назад

Glad to hear your making progress! I don’t use satas as they don’t fit my spraying style but they are still Great guns.

@WerdularMotion Год назад

Sata 5500 rp 1.3 is what I use at work as well. Great for waterborne base paint as well as clear 👍 but if you're a good painter, technically you can spray a good clean paint job with any quality gun

@nickcrill7718 Год назад

@@PaintSociety what would be your favorite gun? I just got a sata nr95 for cheap to start doing projects at home.

@nickcrill7718 Год назад

@@WerdularMotion we use a 1.4 I for my work and spray solvent based onto aluminum boats.

@sully7898 Год назад

Dude I'm in the same boat as you, I just turned 23 and my dad is a painter too. I've been learning steadily but man its been great so far.

@moisesrobles7884 Год назад

Thanks for your company that let you do this video's to show us this tips and tricks thanks Brain like always smashing my like botton Texas style yahoooooooooo katakaboooooooooooooooom

@PaintSociety Год назад

Kaboooooom

@tripleeathletics Год назад

I like clearing my blend panel last, because that stuff will slide right off those smooth surfaces without paint on them!

@slackerzsincity8822 Год назад

I always learn something new every time I watch this channel. Sheez full of knowledge.

@PaintSociety Год назад

Thank you!

@chiefgeek2020 Год назад

You and the gunman are always saying get a good spray gun and wondering if there is a place for the R500's out there. I have seen one channel that uses it for almost everything and preaches that it works awesome for small compressor or environments where you don't want a lot of overspray.

@PaintSociety Год назад

Chris from garage noise uses it and he has great results. I’m not knocking the gun but there are better guns that make painting easier. The r500 he uses is great for DIY and that’s why he uses it to show it works

@chiefgeek2020 Год назад

@@PaintSociety Good to know. My problem, and maybe other newbies, is that it is hard to tell which guns are good for the DIY guy who paints something 3-4 times a year and just can't justify multiple 300$+ guns. I picked up DeVilbiss flg5, from spray guns direct, on reccomendation of gunner with a 1.2 tip and use it for base coat and clear (kinda a PITA using same gun for both) but have been looking for a diy friendly gun to augment my setup for a while. I considered getting another flg5 but no one else talks about that gun

@jimfeaster4837 Год назад

Great tips

@NjBoriG35 Год назад

Wish my cars paint looked this good. Someone vandalized my car

@Hansblinkers 7 месяцев назад

Excellent work, I don’t know how you didn’t get a run. Do you recommend using slow reducer even in cold weather.

@abruptlyblunt Год назад

painting used to be a no thinking gig, dust on a couple dry coats of color lacquer wait 15 minutes then throw on a couple coats of clear enamel and you were done......

@eddiebarrera-ws8vu Год назад

Have you ever RU-vidr. China car paint mixing,those guys are masters.

@jaybee8128 Год назад

That's the perfect way to apply basecoat I would of used the tack rag in between coats you see people wacking on big heavy coats I don't know how they get away with it

@noi5emaker Год назад

I paint guitars and find your channel to be invaluable. Thanks for sharing tips like this :)

@vegasheat71 Год назад

Ok, so now that your paint job looks 10 times better than the rest of the car, should you cut and buff the car that has the old paint.

@michaelhasse2568 Год назад

I've watched all your videos, I bought a 700 dollar iwata. Still get massive orange peel. I give up

@PaintSociety Год назад

Don’t stop trying! Dm me on IG

@AlwaysApproved Год назад

@@PaintSociety dont over think it, it's just paint😃

@pealquest4135 Год назад

don't expect to get a giftaway because it's impossible 😁😁

@user-oh8qi3pp6n Год назад

Tolles Video.......aber die Links zu Amazon müssen nicht sein. Amazon ist nicht alles........es gibt auch andere Verkäufer. Ich für mich meide mittlerweile bei Amazon zu kaufen.

@topstring74 Год назад

Depends on the clear at the end. We use Sikkens PC. I was recommended a 10 m flash first coat, bake immediately after second coat. It's been working great that way.

@gregorybaldwin7039 11 месяцев назад

JUST WANTED TO LET U THAT I'VE LEARNED A LOT OF TRICKS FROM WATCHING YOU

@lorenzoolton Год назад

Great job Brian.... question how long after should the tape be removed ? And will it leave lines where the paint was painted?

@garywearing8603 Год назад

No gun control and mil it out, mils all over the board, in my opinion don’t listen or do what this guy does

@HiFiInsider Год назад

Brian, is it true that in the early 90s Honda OEM paint was single-stage? Someone told me this but I don't think he is correct. Hope you can clarify. thank you!

@rogerstephens8980 Год назад

We also run a sheet of plastic about 3 feet above the car from one end to the other helps alots attracts trash thunder road auto body.

@RolandOrtega-j7t Год назад

Hi Brian, I love your videos. I own a small body shop in Tampa and we mostly do insurance work. I was having trouble with the high metallic colors but after watching some of your videos I am now much better with the metallics along with implementing 15:12 other tricks on f the trade I have seen on your videos. Thank you for taking the time to explain everything so well. Best channel for auto paint on RU-vid!! Btw, which clear did you use on the black Acura? Which Tamco clear do you use. Thank you once again.

@PaintSociety Год назад

Lesonal universal clear. Thanks so much for your kind words!

@louiszeigler6869 Год назад

What clear do you use How much are those paint guns

@mitchellferre1652 Год назад

Oh my God look at that Sagola do its thing ! 😍

@marcsorensen1184 Год назад

Also tack off your paint suit every time.

@speedokoterefinishnetwork4937 Год назад

X slow reducer is definitely a big key in geting a flat finish. I say alot on my page as well that if your basecoat aint smooth, anything you put ontop will not be ither

@Velislide Год назад

Dealing with the local autobody shop that fixed my truck on an insurance job. New box side, repainted box side, and this is how it turned out. Pulled flys out of the paint. All kinds of junk in the paint. And they keep trying to tell me, even dealers get stuff in the paint, it's "normal". And the orange peel looks way, way heavier than the rest of the truck. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h7wNxtxUNBw.html

@PaintSociety Год назад

Hi, I saw the video, its hard to tell because the camera makes it look good but I can see tons of swirls, defects in the paint and dulled out clearcoat on the bedside. If this is a shop your insurance company recommended then you can go back to your insurance and fight it to make it right otherwise its you against the shop. Debris and dirt can happen but a good painter can get a much better job, we do it all the job without any problems.

@mikecapp315 Год назад

Jesus, if I sprayed like that I’d have drips and sags everywhere, I likely need to turn my fluid down to get a better finish

@PaintSociety Год назад

This gun is super slow

@nick4281 Год назад

Hey really enjoying your videos! Im looking at doing some surface rust repair on my silver metallic subaru. I just cant decide if i wanna go with cans or a gun! Whats the biggest factor when deciding ? Is it just not having all the equipment that makes people use the spray cans at home more ? Or is the sray gun alot harder? Thank you and keep up the great work 👍

@PaintSociety Год назад

Paint gun! It’s going to give the best possible outcome

@barryloftin4159 Год назад

What kind of sealer do you use ?? Thanks

@alexanderreyes6420 Год назад

I understand that the costumers didn't pay for the damage off the blend door 😂 but it was very small and other possible customers will focus on the quality and defect .the best free advertising is customers. 🎉🎉

@PaintSociety Год назад

Then we have to blend the next panel and we lose $700 on the job

@georgevprochazka5316 Год назад

How are you going to get the dirt off if you're not buffing?

@WJHandyDad Год назад

how do you find out how much reducer to use normally? My reducer doesn't say how much to use, so I normally just use "1" part... if the paint mixes 4:1 I'll mix it 4:1:1

@PaintSociety Год назад

Add it to your basecoat is what I’m saying. After it is all reduced. Then find out the total amount of oz and use the calculated trick

@TK42138 Год назад

That's awesome.

@Jakey032 Год назад

This video has so many helpful tips thankyou! Would it be beneficial to ground strap the car to avoid static or is that a Mith?

@boudreauxcollision2858 3 месяца назад

Another Great Video Bro!!!

@Christopher90210 Год назад

another great video, If you go heavy on your first coat and get the coverage just allow more flash time while you're doing other things multitasking. 👍

@PaintSociety Год назад

Thanks for the info!

@growingautoshops Год назад

You have any videos on reducing base with or without a Ford Cup. RM and PPG seems to spray well per instructions but valspar doesn’t not.

@ericelhaojin3279 Год назад

OK, He's right when He said to never spray the paint too wet. That's because He's using Sikkens. But, some other brands like BASF RM UNO HD for instance, ask for a full wet coat on the fist visit and a half coat on the second. So we should never generalized things.

@tedc9306 Год назад

Thank you for your time

@IE46M3 8 месяцев назад

Amazing talent, amazing results. I greatly enjoy your videos. Thank you 👍

@zybbok6122 Год назад

Great video as usual. But what about 10:12. It's a shame to do all this work and find there's a small dent in the crease of the panel. What would be your solution at this time? How about paintless dent repair. I live in the UK and the guys charge about £100 per panel for a repair.

@timdeakin2524 Год назад

Is that a 99% overlap? You need a bigger fluid tip bro

@PaintSociety Год назад

You’re the pro! Obviously what I’m doing isn’t working lol

@timdeakin2524 Год назад

@@PaintSociety been painting to a high standard for 30 years now, I’m still learning new stuff everyday 👍. But seriously my friend, it might sound counterintuitive, but a much larger fluid setup can allow you to get a thinner coat on👌. If you ever fancy doing a tour of the uk, I’d happily accommodate you 👍👍