I Put Bearings Inside TECHDECK Wheels!!? 

Omg. Times flies so fast man. I used to watch your old videos and your voice changed a lot. I'm happy you're still doing what you love!

great video and a really good look into wheels! this is what people used to do back in the day when bearing wheels first came out! I remember you could buy Winkler Wheels/Flat Face wheels without bearings, with bearings, or you could buy bearings just to glue into your Tech Deck/other bearing-less wheels. Those days were exciting because we started to see brand new gear coming out for the first time, like tiny bearings, the first 32mm decks, the first BR trucks, etc.

(7:33) OMG that is exacty what happended to me yesterday and I was planing on puttig bearings into some tech deck wheels that were just lying around. Thanks!

Hey can you do a video pimping out a performance series tech deck please

You should add those wheels on the Tech Deck Performance Series board.

Tech deck should do this!

I got some illpills and I have a teak prolific series but I’m going to try and also get dynamic trucks and a 5 pack of grip tape too

I love how FB wheels are more expensive than my whole skateboard. My board costs $60

Love the Santa Cruz teck deck! love from Santa Cruz

i have been waiting for my ipe toys wheels for like a month now i didn't know they where based in china when i ordered i thought they would be here in like a week or two.

Can you do more building ramps/ building fingerboards the building vids are my favorite. I love you vids I’m learning how to fingerboard I’m not vary good tho…

Did you use the plastic wheels in her performance series wheels because detective performance series wheels aren’t even that bad for not hiring bearings

Why you need expensive wheels: Feels good Distinct grippy feel(urethane and polyurethane) *squeak*

I LOVE TECK DECKING

Gripsion oil Is better than puting bearing on tech deck wheel

I wouldn't say "fingerboarding is dying since" at all - that's just how it appears when you compare things to the great fad. Skateboarding is a big industry nowadays and firmly established which makes us forget that skateboarding started out as a fad as well back in the 60's before it died completly around 1970 and only a few punks were still doing it. There was no mass movement and no money to make, but that's precisely the time when the foundations of a legitimate scene were laid in between 1970 and 1975 as well as the foundations of modern skateboarding as such, they pushed their passion underground and independently of any big industry to the point where the public image of skateboarding shifted completly and it became marketable again from '76 to 79'. It experienced another fad, grew rapidly, money got made for the first time and things got professional with brands establishing which are still around. And then it all suddenly collapsed again around 1980, but the hard core (more experienced and more numerous than last time) kept the scene alive until it got appealing again to the point where skaters of the Bones Brigade gained humble prominence and caused a vert hype in the mid 80's whose eventual downfall would lead to the hard core to develope street skating which again had mild mainstream success before it shrank again until you had the big mainstream hit of THPS and skating hitting stronger than ever. What I mean to say: Such periods of perceived decline had been crucial for skateboarding, its culture and future developement because it forged a scene which didn't rely on mainstream success and kept pushing - and I think the same holds true for fingerboarding in a smaller scope just as well. It's the decline of the fad which made fingerboarding what it is.

Something I don't understand : are TechDeck fingerboards sold with no bearing on the wheels ??? How do the wheel rotate with no bearing ????

Can’t wait for this video title, finally riding my skateboard down the mega ramp.

I wanted to do this with the tech deck performance board because of the super grippy wheels but I'm a little worried about drilling them out since they're the only set I have of those rubber wheels

you should make finger board obstacles out of clay

hey alex, u got one o dem old skool decks yet?

I added a little 3-in-one multipurpose oil to wheel screws on my son's Tech Deck and it made a huge difference on how it rolls. I wanted to buy my son new wheels with bearings, but after the oil I don't think it's necessary.

COOL

u should make a video of completely transforming tech deck parts and the board and making a new type of tech deck!

Nice video maybe buy a tech deck longbourd next

Hey Alex love your videos truly one of the best content creators on the platform. Colab?

Im doing this with my teak tuning board complete the wheelies don’t grip so im using my performance boards wheeles and put bearing in them and i might sand the wheeles to.😊

Youve gotta make a video about back tails

I hand crafted my own decks out of multiple different types of wood veneer pressed between two tech deck decks with two c clamps and titebond wood glue between each layer of veneer. Even used food coloring to dye the middle layer of the decks just like the real ones have. And colored crafts sand over a light layer of wood glue to make my own grip tape layers on the top. These would have been amazing to have back then.

Wouldn't you want your wheels to be solid rubber or even make little tires to put on them because it would feel smoother?

Nicee

When’s the new drop? Early btw… Big fan as well!

I love 💕💕💕💕💕💕💕💕 to be RU-vidr like you

🐐🐐🐐

I wonder what bearings in the performance series wheels would be like.

Him: The quality makes it much more expensive Me: watching a high quality video for free

What size drillbit did you use?

You should put tech deck griptape on a professional board

Me being product designer, no it really is as simple as putting some urethane in some silicon molds then doing a final sanding just like normal skateboard wheels. except there's a whole lot less surface area to sand it's much less work just the same process and a whole lot less material used

Spiked in the 2000's....that's when they came out, there wasn't close to what there is now for options. It was tech deck, dollar store or nothing. No bearing, no wood boards. Lol I don't think they are close to spiking just yet.

Prob just gonna do this tech deck has nice wheel graphics everybody else jus has swirly colored wheels that have been done 1000 times over lol.

Make the worlds smallest fingerboard and kick flip it

I remember when I got my first tech deck I brought it to school the day after I got and the wheels got chipped but I'm getting urethane wheels soon tho.

Tech deck really need to add the bearings

i got spitfire finger board wheels are they rare?

How about nollie heelflip😅😂😂

I had this idea

tip of the day : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MvIbH1sHk2Q.html

Sheesh

Are the bullgod fingerboards 7plys???

Here is the link

Fingerboarding started 80s when lance mountain made them popular

3:06 bruh the bearing broke

Early gang

I just started finger boarding a few days ago. I just can’t seem to do the tricks! Can someone help me?

You guys have like 80+ dollars fingerboard mine is like 400 pesos

remember when your server got taken over?

Lol second

Bro please use a clamp of some sort and dont drill into your hand. Love the videos but that scared me. Always use a pair of pliers or something.

grip would be very bad still tho

I told a girl how a bearing works then I said she was my bearing to my wheel AKA asked her out and now we are dating 😂

i can push my old tech deck with a flat spot across my table with virtually no force. definitely dont need so much force i would mess up a trick. this is all marketing, all enthusiast mumbo jumbo. if youlike the smoother feel, thats fine., but dont try n mke up lies. the amount of force needed to move a cheap part of wheels is virtually nonexistant.

First haha

mb n

you wanna know how famous you are? well im your fan from malaysia, please shout out on your next video😭