I regret not building this sooner

Подписаться 271 тыс.

Просмотров 235 тыс.

50% 1

Big thanks to Shopify for sponsoring this video! Get started with your free trial TODAY at shopify.com/mwawoodworks
I wanted a portable workbench that had everything I wanted at the least possible cost.
✅️ PROJECT PLANS:
Portable Workbench (Imperial & Metric Versions) - mwawoodworks.com/product/port...
The Build My Shop Plan Bundle - mwawoodworks.com/product/the-...
The All Plans Bundle (Save 65%) - mwawoodworks.com/product/the-...
✅️ TOOLS AND SUPPLIES IN THIS VIDEO:
UJK Parf Guide System - tsoproducts.com/tools-equipme...
FastCap Track Rack - tsoproducts.com/organization-...
Rare Earth Magnets - amzn.to/49O4Sk6
Threaded Inserts - amzn.to/49JLbto
Star Knobs - amzn.to/47lamBb
Gator Lift - amzn.to/3R7EqKE
Metric tape measure - amzn.to/3G9jCfv
Automatic Center Punch - amzn.to/3MS5DPg
Bessey 12” Clamps - amzn.to/47hv4BM
Amana Countersink Drill Bit - amzn.to/46nhJXw
Snap Straps - amzn.to/413dwHv
Side Carry Handle - amzn.to/3MS6xeC
Test Tube Foam Rack (for bench dogs) - amzn.to/3GsI7EV
Magswitch 165lb (as seen on bandsaw) - amzn.to/46mOO5J
TSO Rail Square - tsoproducts.com/tso-guide-rai...
TSO Bench Dogs - tsoproducts.com/bench-dogs/ts...
Leather Handles - amzn.to/46pplZi
📽️ WHAT TO WATCH NEXT
Organize any Workspace - • 11 Simple Ways to Orga...
9 Tools I Regret Not Buying Sooner - • 9 tools I regret not b...
How to Build Cabinets - • How to Build Wall Cabi...
✅️ HOW TO SUPPORT MY CHANNEL
Join my Patreon community: patreon.com/MWAWoodworks
Get Project Plans: bit.ly/download-project-plans
Get some MWA Woodworks Logo Merch: www.mwa.keyapparelstore.com/
SUBSCRIBE : ru-vid.com?...
✅️ LIST OF THE TOOLS I USE IN MY SHOP : bit.ly/tools-i-use
*Disclaimer - As an Amazon Associate I earn from qualifying purchases
✅️ Other Affiliate Partners
Bits and Bits Co. - 10% OFF using code MWA10 - bit.ly/48Pw5Cq
TSO Products - tsoproducts.com/?ref=MWAWW
Taylor Toolworks - lddy.no/1gngh
✅️ MWA WOODWORKS ON SOCIAL
Instagram: / mwawoodworks
Facebook: mwawoodworks
Pinterest: / mwawoodworks
---------------------------------------------------------------------------------------------------------------------------------------------
⏱️ Chapters
00:00 I've needed this for a while
00:32 Cutting big wood into little wood
02:06 Create a perfect MFT top
08:10 Putting it all together
09:14 Some drawers would be nice
10:31 Nice Legs!
12:50 Tons of Tool Storage!
14:21 The end is near but first let's test it!
#diyprojects#woodworkingproject#howto

Хобби

Опубликовано:

9 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 190

@forster46 5 месяцев назад

I work for a cabinet company here in the states and we exclusively use metric. Before I started working there I had never used it in my life. It's much easier to measure with accuracy, and the math is much easier. Now when I'm working on projects in my home shop I mostly use metric. I think imperial is much better in normal construction like framing etc, but for smaller things that need to be more accurate, metric is much easier.

@MWAWoodworks 5 месяцев назад

Yep most cabinet shops around the world use metric. They build cabinets on the 32mm standard

@kiheidude 3 месяца назад

I just started using metric myself and love it. Much easier and more accurate. The problem is trying to reprogram my 66 year old brain.

@tbrewer4794 2 месяца назад

Welcome to the world, fellow ‘Murkins

@jt5358 Месяц назад

🥲 I love to hear of Americans converting! But to offer my counterpoint; as someone who grew up metric, but from watching so much high quality video content coming from USA, there's much to like about imperial too. If I wanna build a furniture piece that doesn't need to fit into an exact place, I opt for imperial. Simpler numbers that allow me to visualise the end result more easily. 6" x 3" vs 6" x 4" I can imagine better than metric, unless I'm using round numbers. Also, 8by4 vs 2440 mm x 1220 mm for a sheet of plywood. Much less syllables when talking to lumber guys 😂

@Choedron 25 дней назад

If material supply is in metric, then there is not problem in using it in construction. Fx we do not have 2 x 4. We have 50 x 100 mm instead. There is really no difference in strength. And our entire building system is based on metric. We would find it silly to use Imperial.

@diggk1 4 месяца назад

I use the Parf guide system with plywood all the time. Once the 3mm holes are drilled I flip it upside down & drill about 1/16” with the 20mm so there is zero blowout. Works like a charm & only take a few more minutes.

@ChorizoPig2 2 месяца назад

Happy to see this comment -- this was my first thought when I saw the tear out on the back.

@stinkyham9050 29 дней назад

Isn't drilling from both sides the standard blow out reduction method for any hole through any material anytime? I've been using it to drill through block walls for decades.

@chrisclapper9828 5 месяцев назад

I love the way you explain things. I’m a 63 year old woodworker. And my daughter, who is a fine carpenter. I tell her when you think you know everything you don’t. You’re never too old or too. Good to listen to somebody else that knows what they’re talking about. Even if you get one tip out of 10 videos, it was worth it. Quick story. I had the same job for almost 40 years with the same company. One day one of the owners walked by me and asked, how are you? I replied with I’m done I quit at 60 years old I started my own remodeling business. Now I did this when most guys are retiring. I did it because of my love of woodwork, and I always promised myself I would have my own business. Thanks for your inspiration, and look forward to watching your videos.

@stankolodin5586 4 месяца назад

Interesting, what made you choose that moment or was it more the opposite, you stopped choosing to be there?

@chrisclapper9828 4 месяца назад

@@stankolodin5586 …The last part of my life is for my passion.

@rogermccaslin5963 3 месяца назад

You quit because they asked you how you were? Or was that a typo and you really meant "Who are you?"

@fdort3971 25 дней назад

I hope you succeed. After working for others since I was 10, I decided at 50 I'd had enough abuse from terrible employers and trying to start my own woodworking business. As a woman I've had very little support for my endeavour. I have health issues. My biggest stumbling block is people don't believe a woman can do it. I've literally been told I'm too old!

@JorgeAguilar714 5 месяцев назад

I used the Parf system to build the Ron Paulk Bench and what he recommended was to use the forstner bit (no jig) on the underside to score the plywood and then drill out the holes from the top side using the jig. It works perfectly. Great project.

@MWAWoodworks 5 месяцев назад

I read that when I was researching afterward. I will remember that for next time!

@zoladkow 5 месяцев назад

yeah, scoring the underside seems like no brainer after the fact... also - tape? on the underside? really? 😅

@billybike57 5 месяцев назад

When I retired I committed myself to use the metric system, it took me a few months but I’ll admit I find it more accurate to use and easier.

@MWAWoodworks 5 месяцев назад

Awesome!

@johnshakespeare3004 5 месяцев назад

welcome to the power of decimal....I live in the UK I couldn't possibly be working with 900 64ths - although we do still measure height weight and distance travelled in imperial.... the world is confusing at times.

@malivekaju1881 3 месяца назад

I love the metric measurements !!! GREAT for us in Europe !! The children ( and adults) with dyscalculus must be struggeling a LOT with the imperial system .... And I like your project a lot also !

@rcamoonpie648 23 дня назад

Really enjoy your videos! Thanks for getting me back in the mindset of actually doing something with all my equipment! CNC,LASER,And etc,etc,etc Get frustrated with the constant what do i build to make any income with all this equipment i bought and tend to walk away and say the heck with it all! But I’ll keep digging and hopefully eventually it will all pay off. Thanks again!

@brianhill1294 5 месяцев назад

Beautiful work, really useful portable workbench with great features.

@ewetuber186000 5 месяцев назад

I used the parf guide to make a portable work bench from MDF several years ago. It has been good, but yours has some smart advantages! I’m going to re-do mine using some of your ideas. Nice job!

@MWAWoodworks 5 месяцев назад

👍

@abad_gtr1123 5 месяцев назад

man this thing is sweet! love the portability and the onboard storage.

@MWAWoodworks 5 месяцев назад

Ya I love it 😄

@chrisbellamy237 4 месяца назад

Scalloped edge (Precision Shear/ Wave Cutter(freud, fisch, etc)) forstner bits help with getting cleaner cuts on plywood and soft woods.

@richardmarquardt6246 5 месяцев назад

Sweet! Love all the onboard storage.

@MWAWoodworks 5 месяцев назад

Ya it's super convenient

@nathansilver9190 Месяц назад

Greetings from the USA. I really like the design. I'm a cabinet maker here in the USA. You did a great job. Well done.

@scottmorris4914 2 месяца назад

Greta project. Have been considering one, and I like yours. They actually have a tool, that puts a slight chamfer on the holes, and this should take of most of the blowout.

@rickcimino5483 5 месяцев назад

I saw this on instagram before seeing it here......great build. Thank you for posting it.

@MWAWoodworks 5 месяцев назад

Thanks Rick!

@thehawkc 5 месяцев назад

As usual awesome build ! Thanks again.

@MWAWoodworks 5 месяцев назад

It was a fun build and a quick weekend project!

@-11BRAVO- 5 месяцев назад

You know your going to replace that top when none of us are looking. Lol I’ve seen and watched enough of your work to know that tear out will keep you up at night.

@MWAWoodworks 5 месяцев назад

🤣🤣🤣 I already cut a replacement top on the CNC! However I will hold myself back and use this top until I wear it out. I just won't look underneath 😭

@patriotwoodworker6092 4 месяца назад

Cool bench man!

@garymiller5937 5 месяцев назад

Nice bench. Thanks for sharing. 😊😊😊

@MWAWoodworks 5 месяцев назад

Thank you Gary!

@kevinthomson6324 5 месяцев назад

Looks promising. Would love to see a video of it in action in the field. Showing it’s usefulness

@MWAWoodworks 5 месяцев назад

Maybe I'll do some content on Instagram showing it when I use it!

@hendrand 2 месяца назад

Excellent!

@dannyoktim9628 5 месяцев назад

Great Vid . . .well designed build, love the storage end draws and under track saw hustler, just questioning leg stability. Not Bashing just suggesting, the track storage is a +++ and is a must in this build, my thoughts would be to use folding metal legs from a venue table for their stability and quick deployment. To make them work you'd need a spacer to elevate them above the stored track when legs were collapsed for transport. Just my thoughts. . . . Stay safe, Stay happy

@MWAWoodworks 5 месяцев назад

Thanks for the idea! In my experience folding legs of any kind tend to introduce way more slop and wobble. Hinges have way too much play in them. Fixed legs, like on a table, are more rigid and stable.

@coreywells9498 4 месяца назад

I really like the top. Has a torsion box rigidity with great storage options. I’m a big fan of throwing my single ply diy mft on a bora centipede on the jobsite but its a little low and slides around on the multiple points of contact. My future rebuild will be closer to your top with pockets to drop onto the centipede I think. Optionally could use the sawhorses I usually have onsite.

@kwilliams2239 2 месяца назад

The Woodpeckers system uses a router bushing and bit. No blowout at all. Then use the PARF reamer/chamfer drill bit to clean up the edges. Perfect.

@joeyleerobbins 5 месяцев назад

Awesome video! Been waiting for you to put a new vid out and this one did not disappoint! Hope you and your family are well and had a Happy Thanksgiving!

@MWAWoodworks 5 месяцев назад

Thanks, brother!

@JFantin75 5 месяцев назад

Love this. Very well thought out. I might make one :)

@MWAWoodworks 5 месяцев назад

🙌 I can't wait to use it in the field

@robertschmidt6383 5 месяцев назад

Looks great. How heavy is it?

@JonSauter 27 дней назад

Those are some nice looking pocket holes.

@markduggan3451 5 месяцев назад

Nice setup.

@GarrySanchez 5 месяцев назад

Too Rad, thanks for the great content.

@lrc8624 3 месяца назад

i have the ujk parf guide and i used it on plywood... i drill the bottom half way first , and then flip it back to the top and finish,. It wont have tear out out that.

@hotswap_tofu5087 29 дней назад

I admire your courage for using metrics bro. Welcome to the rest of the world.

@draztiqmeshaz6226 5 месяцев назад

You could also put a sacrificial backing board under your nice piece.

@danielwobbles8648 4 месяца назад

Hi, what is the gloss plywood called? Is it veneer, as that’s all I can seem to find here in the uk 😄

@GrizzCraftCustoms 4 месяца назад

Great portable workbench. How will you address replacing the top when needed?

@MWAWoodworks 4 месяца назад

The top is fastened with pocket screws so I just need to cut a new top and pop it on.

@cptlou 5 дней назад

Geoff Shepard’s offer pretty compelling evidence in his book and podcast.

@CHLA94 4 месяца назад

What is the pocket hole station you use at 6:40? Looks awesome

@dawsonlinde9542 5 месяцев назад

Very nice! What is that benchdog fence? That think looks slick

@MWAWoodworks 5 месяцев назад

It's sold by Bench dog UK you can use it on any MFT style worktop

@lonhetrick 5 месяцев назад

Hi - can you tell us about your dust collection attachment on your table saw? I've never seen a hose laid on the saw like that before. How is it attached? Pros/Cons? Thanks!

@MWAWoodworks 5 месяцев назад

That's the standard dust collection that comes with SawStop table saws

@xinixxagnix201 5 месяцев назад

Very beatyfull, pro skills.

@MWAWoodworks 5 месяцев назад

Thank you! Cheers!

@cerberus2881 5 месяцев назад

"Yay Metric" is absolutely right, much easier than Imperial.

@MWAWoodworks 5 месяцев назад

Not at all true if all your machines are in Imperial 🤣

@cerberus2881 5 месяцев назад

@@MWAWoodworks We should have made that change long ago.

@foxhallww311 5 месяцев назад

..........

@coolbugfacts1234 5 месяцев назад

@@MWAWoodworks The US customary inch is legally defined as 25.4mm since the 1890s, so technically the US is already metric 🤓

@justinhoffman5339 3 месяца назад

To prevent blowout 100%, you would have to partially drill the holes on one side and finish them on the other side. Effectively going through the entire process with the drilling jig twice.

@FlipYTanimates 5 месяцев назад

very nice 👍, what plywood do you use?

@MWAWoodworks 5 месяцев назад

Believe it or not I found BALTIC BIRCH! It was like catching Bigfoot I felt so proud🤣

@tomwilson5822 5 месяцев назад

I’ve just signed up on your channel and would love to know where you got the plastic container to your upper right hand side.thanks

@MWAWoodworks 5 месяцев назад

If you mean my organizer bins then check out my last video published before this one 👍

@tomwilson5822 5 месяцев назад

Checked in out but there 86 dollars to get them to Germany. But thanks anyway 👍

@briantaylor9266 5 месяцев назад

To prevent blowout on the back of your plywood, first drill part way through with your Forstner bit, flip the sheet over, then drill the rest of the way through from the opposite side.

@MWAWoodworks 5 месяцев назад

Yep great tip! Thanks for watching! 🙌

@georgenewlands9760 5 месяцев назад

I started on the underside and just made a scoring cut…you don’t need the parf guide, just locate the centre pin and cut through the surface ply. Flip the top right side up and complete the dog hole drilling.

@KyleVeatch 5 месяцев назад

I also had a similar issue and found that clamping another piece of plywood tightly under that piece stops the blowout also

@ThereIsNoRoot 5 месяцев назад

Very smart design. How much does it weigh with all those tools in it?

@MWAWoodworks 5 месяцев назад

I haven't officially weighted it but I'd say 60 lbs

@user-ee7jv7go6f 5 месяцев назад

Awesome , that looks great.. great job , that’s probably better than the cheap plastic ones you buy in stores….

@MWAWoodworks 5 месяцев назад

Oh yeah much sturdier and full of features.

@TheManlyHand 5 месяцев назад

I use the centipede 2x4 with an HDF 2x4 with dog holes. The top also folds in half for easy portability

@MWAWoodworks 5 месяцев назад

I have a centipede as well that I use for cutting plywood

@doublen675 5 месяцев назад

"And what this bench needs is some legs" Man, I had to rewind here because I thought you said something else. 😂

@kai93453 3 месяца назад

hey i was wondering, is there any way to make such precise dog holes without the fancy expensive eqiupment?

@MWAWoodworks 3 месяца назад

Not that I have tried. The Parf Guide is the best option IMO or a CNC. If you already have an MFT top you could use that as your guide to produce more such tops.

@TheSmartWoodshop 5 месяцев назад

I had planned to point to a video demonstrating the bottom pre-drill method on the underside, but it seems others beat me to it. Tape No bueno.

@MWAWoodworks 5 месяцев назад

Yep. Found that out.

@gregpearce 5 месяцев назад

Out of curiosity, how much does the bench, with all items stored, weigh?

@MWAWoodworks 5 месяцев назад

Around 60 lbs which is about the same as an MFT3

@klauslouring7635 15 дней назад

Nice work - I may use a little differnt way of measureing an assembley (sice I dont have those nifty sponsors 😊), but a nice bench, witch I can use in my tiny workshop, where everything by the way is metric - no problem in that (werent you guys invited to join a couple of times😅😊)

@hughlaxton7852 4 месяца назад

Any chance you can tell us how much it weighs?!!

@IanWilliams-mw8mg 4 месяца назад

blow out on the bottom was caused because the depth stop was not set so that the 20mm bit just went through just a small amount good first try though

@flfbsphatboyblue8970 5 месяцев назад

Was this designed in metric measurements or imperial and converted to metric?

@MWAWoodworks 5 месяцев назад

It was designed in both metric and imperial separately. The one I built for myself was in metric.

@freakent 5 месяцев назад

I'm conflicted, I love the elegance of a mesuring system that divides perfectly by 4 and 3, but hate the convoluted fractions required for smaller measurements. What we need is duodecimal meter!

@reedy8585 2 месяца назад

You could just put a thin spoil board or a batton of wood under the row of holes you are drilling to prevent the blowout

@rh9915 5 месяцев назад

Good Stuff

@MWAWoodworks 5 месяцев назад

👍

@rentonchappell5966 Месяц назад

Drill the top half of the holes and then flip the sheet over?

@Thefreakingwierd1 Месяц назад

But how heavy is it with all the stuff in it? I wanted to see you walk around with it by yourself haha

@bigredracingdog466 2 месяца назад

1:02 I find I'm using metric more and more. I removed my Imperial-only tape on my table saw and replaced it with a dual Metric/Imperial one just so I didn't need to fiddle with measuring metric cuts.

@crashkg 5 месяцев назад

After I drilled my guide holes I flipped the plywood around and just drilled in the 20mm holes a few mm deep without the guide. then went to the top and drilled through with the guide. Eliminates the blowout. The bit they supply is pretty crappy. They had to send me another one after it chipped after a dozen holes.

@MWAWoodworks 5 месяцев назад

Yep that's a great idea

@bunkie2100 4 месяца назад

I find myself reaching for my metric tape measure more and more often.

@imsowright90 4 месяца назад

Neat.

@christiangonzalez6493 Месяц назад

In the first seconds of the video you can see a pink base to cut. What material is?

@MWAWoodworks Месяц назад

Foam insulation

@hansonr22 3 месяца назад

Franklin TN, the world capital of “stuff made from old barnwood”

@MWAWoodworks 3 месяца назад

We do have a lot of old barns 🤷

@bigredracingdog466 2 месяца назад

5:36 I used HDF (Valchromat) and still got blowout. If there is a next time I'll buy a sheet of MDF to use as a backer board and sacrifice it to the MFT gods.

@screamingdonkeywoodwork 22 дня назад

forstner bit 95% through till just the tip is coming out. Then flip and drill from other side, but for this project... I'd have a whole lot of "who cares"

@steviewonder9209 5 месяцев назад

Very nice! Thank you for your efforts. I want to point out however that while the voice-over mentioned "6th and 8th holes", I believe you meant to say "8th and 10th". (verified by Pythagoras and also actually counting the holes in the video LOL)

@MWAWoodworks 5 месяцев назад

You made me sweat for a minute but it's actually 6 and 8 🤣 the "10" is represented by the diagonal. 6th hole past the stick along the front and the #8 hole along the perpendicular.

@martinfarrow2825 5 месяцев назад

Welcome to the metric side 🏴󠁧󠁢󠁥󠁮󠁧󠁿

@tyronepelfrey8192 Месяц назад

Hey I got one thing to say well maybe 3 or 4. Man you got to keep family first. They are your happiness and faith. Second we on the web are here and not going anywhere. I can’t do the Patreon cause I’m on a fixed income but I’ll be here to keep hitting the thumbs up button till I don’t have one. Is this 3 or 4 um not sure anyway keep on making videos and teaching is mere mortals a thing or two. Tell the family you have another family on RU-vid and they are welcome to join in on the videos ( truthfully we need to see the better half and kids to see why they put up with you 🤣🤓) if I’ve paid the power bill I’ll be here keeping on making. Your friend TY

@JoeL-zx2tl 2 месяца назад

What is the total weight of your portable workbench?

@try44 5 месяцев назад

Throw a scrap piece of plywood under it before drilling the holes. Problem meet solution I know you don't want the pocket holes on the outside but is pocket holes with very minimal structural integrity benefiting the build? One of the very few rules of pocket holes is don't screw from the inside out, so I don't understand the reasoning to do them that way

@MWAWoodworks 5 месяцев назад

Castle pocket holes are at a much shallower angle than typical drill pocket holes. I think it's 7 degrees vs 15. It's not straight in but it's not far off. The bench is very strong as is.

@StormGod29 4 месяца назад

Next time flip your table top over and use the system to pre-drill the back about 1/4 way through. Then when you work from the front, you won't have any blow out at all.

@techcodenet 4 месяца назад

So hardware/lumber stores in USA don't offer cutting down sheet material? In The Netherlands and Germany - Gamma/Obi/Hornbach/etc all have huge vertical saws that literally only cut down sheets per your specification in both dimensions (height and width since sheet material is placed vertical). And unless you are asking for more than 15-20 cuts per sheet - they also do it for free. Meanwhile even in Eastern Europe/Balkans - you can order sheet material cut, and in case of melamine panels even ABS edge-banded. Well you can do that in the Western Europe too - but at that price point I might as well just hire an actual wood working contractor that also installs it.

@DawnBarb 5 месяцев назад

You should have carried in the insulation with the gator grip… save your back

@MWAWoodworks 5 месяцев назад

🤣🤣🤣 that would have been great!

@eliastillery8137 3 месяца назад

So what was your cost?

@MWAWoodworks 3 месяца назад

For the workbench? The price of a sheet of plywood plus some threaded inserts and knobs. Didnt add it all up myself.

@elchimpo9590 5 месяцев назад

Nice build. Needs wheels. I mean how heavy is it, 60 to 80lbs

@MWAWoodworks 5 месяцев назад

Adding a set of wheels would be sweet! Ya it was a little over 60 lbs.

@aggibson74 4 месяца назад

5:31 The recommendation for no blowout is to use MDF? Yikes! With all those Festools, I thought there would be a better recommendation. How about shallow drilling from the backside first then finish the hole from the top? Cool bench design though.

@MWAWoodworks 4 месяца назад

Yep you can do that if you want to double the entire process time. I found that MDF works much better. MFTs are made of MDF anyway so it makes sense.

@zoladkow 5 месяцев назад

so you're saying you had to suffer metric for the aprons, while it's only relevant to the doghole spacing, only if you want to match the MFT system and for which you had a jig system anyhow? 🙃 seems legit 😁

@MWAWoodworks 5 месяцев назад

When you build in CAD software you can only use one system of measurement at a time.

@Choedron 25 дней назад

To a European it is really funny that you even have to mention using the metric system. We really do not understand why Americans continue to insist on using the Imperial system, when the metric system is so much easier to use.

@andersrydlund5513 Месяц назад

US converts to the metric system inch by inch

@RobinsonStevens Месяц назад

I just wish I knew a local woodworker who would let me borrow the parf guide. El Paso... Anyone close?

@rulowth4815 5 месяцев назад

Damn, looks amazing, don't give me new ideas, i already have a perfectly working one 😢

@MWAWoodworks 5 месяцев назад

🤣🤣🤣

@christopherwalker283 5 месяцев назад

Just multiply your inch dimension by 25.4 - Cannot understand why Americans find metric so hard - I was borne in England (Imperial) and moved to South Africa when Metric was launched - no problem. Adding 273 to 285 is easy but adding 2.15/32' to 18.7/8" is a nightmare?

@MWAWoodworks 5 месяцев назад

It doesn't matter when none of your equipment is in metric

@cyberlizardcouk 4 месяца назад

metric is so much easier, everything just revolves around divisions of 10.

@frognastie785 4 месяца назад

Metric measurement makes sense

@ankitchaudhari1607 5 месяцев назад

Black snake 70

@AlainStar 5 месяцев назад

🙏👏👍💪

@MWAWoodworks 5 месяцев назад

🙌

@Surmoka Месяц назад

But it's sooo müch easier to work with millimeters than complicated inch fractions all the time.

@MWAWoodworks Месяц назад

Nobody really works with complicated fractionn in woodworking. Nothing more complicated than a sixteenth of an inch. It's actually pretty easy most of the time.

@rcgolf1505 2 дня назад

Cost a little over a sheet of plywood, but you forgot to add another $300 worth of accessories to build a bench

@philipb867 3 месяца назад

metric is so much easier and better to use than imperial.

@SarcasmoRex 5 месяцев назад

Did I miss something, why is this being done in metric? Not complaining, but I'm confused as to the reason.

@MWAWoodworks 5 месяцев назад

The MFT style top is in metric and when you design in CAD you have to choose one unit of measurement which in this case had to be metric. I wanted to try working in metric so I went along with it

@user-jq8yq1oo4p 4 месяца назад

"Hole process" lol

@LearnMakeLive 27 дней назад

Welp all those tools equals not doing this one😂

@simplerefinedliving9285 5 месяцев назад

Go on and amit it. You loved using metric didn't you...... So funny seeing yanks struggling with whole numbers...... Good vid, enjoyed that.

@MWAWoodworks 5 месяцев назад

No I really did not enjoy it because none of my tools are set up to use it 🤣 if I was in a metric shop and tried to use imperial I'm sure the feeling would be the same.