I regret that I did not do it earlier! Very useful thing! 

Hello, friend! How's your health? Today I will show you a great idea for any carpentry workshop. I hope you like it and leave your reaction under this video!

Watching this was like being in a meeting that should have been an email...

This is a valuable addition to my woodwork collection ru-vid.comUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

"retractable trash holder" - would that have been so hard to put in the title? Nice work, but I resent the click bait

I’m glad I fast forward through these types of videos. Nothing like watching a guy make an embroidery hoop.

Looks pretty handy but if you slid a tall waste container under there it would do exactly the same thing.

A pull out bag does come in handy in the shop. The circle jig for the router is one of the best jigs out there. Keep up the great work as the goal is for us to continue to inspire others to build something awesome! 👍🏼

I just love when all I do is waste time on the internet, while “content creators” tell me I’m witnessing something useful of urgent need. Thanks, it seems to make sense that I’m here. The trash found it’s place. Good. I feel relieved

Where are the red wheels??? I WANT THE CLICKBAIT RED WHEELS!

So where IS this useful tool? The image on the title page bears ZERO resemblance to the wastebasket produced?

Great job I did a similar one with a 40 gallon plastic can. Cut a board in a circle added wheels and cut a 6"×6" square on one corner of the lid. It fits under my bench and is able to wheel wherever I need it.

8 minutes and 33 seconds (I didn't watch to the very end) of my life I will never get back.

That;s cool! number 5. I winder if I could do that with my embroidery hoops? Bet I could.

yes i have one of those, slides on the floor has a handle and is called “rubbermaid”. you can even position it so that off cuts can be tossed directly in the first time instead of stacking them up.

For every 20 videos that say “I couldn’t live without this”, there is maybe 1 where the idea seems quite good. My tip for everyone is to go to the end of the video first to see what has been made and whether it would be useful to you. If yes, then watch the video; if no, then you have saved 5 minutes of your life. I have no need for a complicated waste bin. I just pull out a plastic bin from under the band or mitre saw. Easier and uses no disposable bags.

Just found your channel & it is absolutely amazing. I am a tinkerer & carpenter, builder of horse structurs & oddly enough , beautiful kitchen tables & coffee tables & benches! I have a little ranch in the middle of no where & create tools as needed. I am definitely one Grandmama that does not knit! Thanks for making videos of your creations. Much appreciated.

Well done Mr Bin

I have a plastic trash bin about the same size I bought for under $9.00 at the store. It slides under my miter saw table and I can fill it full and heavy of cutoff scraps and sawdust without risk of bag tearing. It took me only minutes to buy and start using. I didn't use any of my good plywood, screws, clamp, or drawer slides to make it, and it didn't take me any time or effort to build it. I think I'll skip adopting Vanya's suggestion on this one. Indeed, one would have to be pretty desperate for something to do in the shop to make Vanya's pull out plastic bag trash bin. My el cheapo plastic trash bin is just as good -- if not better.

Cool, Kinda like the one I built 10 years ago. :) With the exception of sliding table ends that act as squeegee/sweepers to clear everything off right into the 55gallon burn-drum.

I knew what that was going to be as soon as i saw the rings as we did that sort of stuff in the 50"s when i was doing my carpentry apprenticeship and its good to see things being done on RU-vid that is old school. I congratulate all the old school stuff coming back.

Enjoyed watching all the craftsmanship while not having a clue what you were making. About halfway through I skipped to the end. When I saw the end result I marveled at the immense effort to construct this. Me? I'll expend my efforts to buy a large trash can. That's very useful to me. Best wishes.

8 minutes in before I find out I'm not interested in what he's making because of stupid clickbait titles.

Ball bearing drawer slides and the time it took to make that. Along with the tools used to do the job. I just use a blue recycle bin under the workbench that I got given to me from the town.

Ten minutes that I will never get back

love it, now, that´s useful anywhere, excellent craft!!!

Hello, friend! My health is good, thanks for asking. How about you put an actual description of the thing in the video description? Thank you!

Please describe what you are making ahead of time. I had to fast forward quite a bit to figure out what you were doing

What a cool idea!

Brilliant!!!!!!!!!!!!!!

clicked based on the curiosity of what the thumbnail image was used for. Disappointed it was a completely different build and I still don't know what the thumbnail image item is...

Kinda' a long walk for a tiny drink of water...

Is it going to be a toilet seat, a porthole, a dish washing bowl holder. No it is an absolutely brilliant waste bin for offcuts and anything else that should be put in a bin. Many thanks for sharing that was the best 8 minutes I have spent in a while.

I need something like this for my kitchen

Love how the vid is called never throw away scraps of plywood and he makes something to throw away scraps of plywood 😂😂🤣

オススメに出て初めて来ました。 めちゃくちゃ凄いけど、持ってる工具が凄すぎて全く真似できない😅

Well if that ain't slicker than snot on a doorknob! You made that look so easy, too. 😄 Seriously, this was a really neat idea & fun to watch. Thank you for sharing.

Wow yeah, you win

I like your step by step video, but please don't use click bait titles and put a finished product at the beginning of the video so i don't have to waste 8 minutes or have to skip to the end to see what you are teaching us today. Good luck with the channel!

A 5 gallon bucket works and you could save all the wood that was wasted on this.

You've just sorted one big problem I have. Thanks for the Idea.

Well Done !

WOW!!!!! NOT only did I lose minutes off my life seeing this, you also taught me how to use a garbage bag. Brilliant

My guess is you've built the sliding trash unit to throw the red wheels away because you can't remember why you bought them.

When I look back on my life this will be one of my biggest regrets. Almost 9 minutes I will never get back.

Works almost as well as the trash can i keep under my work bench.

I really didn’t think a bin is where we were going with this

I like how I have to watch an 8 minute video before learning what it's about.

One day I’ll be like you

FINALLY a youtuber who uses the proper safety-tool to operate a bench saw!

Good start, but you need to finish it. When that bag is full, you are going to wish you had added a rolling bottom and a backboard to attach them. perhaps even sides to keep it from expanding outside the table legs.

Image click image had no bearing on the actual video.

Hell yeah buddy that's what I'm talking about??? Awesome 😎👍🏼👍🏼

There's 9 minutes of my life I can't get back.

Doubles as an emergency toilet.

A plastic bin would have done ecactly the same job and been a lot cheaper. “Sledge hammer to crack a walnut,” springs to mind.

Nice.

Awesome idea!!

These videos are well done, but would be more useful if the final product would be described in the title, so one would not have to sit through ten minutes of mystery to see what is being built. This one could be "Under workbench trash bag holder".

Almost thought you were making an outhouse seat there for a minute.

Neat idea , saves having to use a trash can !

The practical demonstration was a solid use case advisory. 👌

Am I the only one who lives the "shing" sound of a blade!?!?

There's 8 min and 40 seconds of my life I'll never get back

EXCELLENT.....👍👍

This should be built into the dining table. No need to get up and finding the trash and finding it full. Just pull this out load a bag on it before what ever feast you are about to indulge on

Perfect for when you're feeling a bit to lazy to head upstairs to the crapper.

Oh look a place for me to put all my hopes and dreams... nifty.

This channel really reminds me of Wordless Workshop from Popular Science.

i like how you made a single cutmark on a circular object lol

Mesmerizing! My exact words were “Well, I’ll be damned”!

A slide-out emergency toilet. Nice :D

I made mine from Redwood and Bubinga. I also used all 24K gold hardware and the bags I use are cashmere & silk lined and have my name embroidered on them.

Really well done, dude! 😃 Fantastic work!!! Stay safe there with your family! 🖖😊

Well that’s 10 minutes of my life I’ll never get back. A cardboard box also costs nothing ;(

Cool idea & build.

👍 хорошая идея, можно применить не только в мастерской, но и дома!

I regret watching this and not doing something more useful with my time.

Vanya - I just bumped into your channel by accident. After seeing that first vid, I immediatly subscribed, which is not something I normally do. Not only are your designs amazing, but your video production is exemplory. This world can use more of both. Give me a little time, and I will watch everything you have put out. There is no BS from you, which is a rare thing in this world. You get right to the point and don't waste my time, nor treat me like an idiot (even if I might be). I find myself constantly saying, Well, I could do that. Yeah, I could do that as well, on and on to the point of realizing, Well, why don't you then (directed to me). You are truly inspirational. I am curious about a few things, meaning what's your basic background. How old are you, where are you from, how do you make a living, who was your mentor, those sort of questions. Even not knowing much about you, I already know, I would be honored to have you in any Foxhole I am in. Keep up the good work. ps - I never throw away scaps of wood, and it drives my wife crazy. I only have about 2 cubic feet of such (well, maybe a bit more), as I tend to utilize it all, one way or another - but clearly, not to the level you do. I am just a weekend carpenter at best, but I have had my moments.

I bought a high, plastic shredder bin for $8.99, cut about 4” off the top and drilled a couple of 2” finger pull holes about halfway up. It will hold a large contractor garbage bag and slides neatly under my saw bench. The project took about 15 minutes in real time. I’m not sure why I keep coming back to this channel, but I think I’m finally done.

GREAT Video and thumbs Up! Thanks for Sharing! Have A Super Week!.....Gus

Great idea. I like the way you present it and how you ‚play’ with Audio. Very exciting 💪

Why did you use the Jigsaw and not the trim router to cut the other circular piece? Perhaps I missed something. Good on you, though. Good thinking.

Nice work my friend! Lovely to whatch.

Love it. Nice.

Thumbnail: looks like a crazy wooden fan made into a skateboard. Actual video: watches dude make a garbage can that slides under a desk Wow

why do all of his thumbnails have wheels in them when the thing he is making doesn't even have wheels

Very nice work sir 😀 I'm wood painter

Perfect Vanya!

I wish my husband had an ounce of talent like you! There are so many things that would make my disabled life easier but he only learned about certain tools from his job. Wow, this is truly incredible and so amazing!

Well that was 9 mins of my life I will never get back. Worth losing another 10 seconds to write this to say: terrible!

I'm so delightful after watch this video

we enjoyed your fabrication. we liked that railroad track anvil with wood ,that is cool.

This reminds me of a story of an Arab walking through the desert. He's exhausted when he comes across an old Jew selling ties. He asked the old Jew if he has any water. The Jew said that he didn't have any water, just ties. The Arab cursed the Jew, and yelled that he didn't need any ties, just water. The Jew said, "Sorry, but all I have are just ties. However, if you go over that sand dune, and about 2 miles ahead, there is a great restaurant with all the cold water you could want. And best of all, it's free!" At the end of the day, and almost dead, the Arab found his way back to the old Jewish man. He gasped, and was barely able to speak, "They wouldn't let me in without a tie." 🤗🇺🇸🇮🇱

Eight minutes of my life waisted, I'd rather go to buy a five dollar trash can 🙄

Great project. Easy cleanup.

What a wonderful craftsman you are.That’s ingenious and beautifully made.❤️👏🏻👏🏻👏🏻👏🏻

Not what I came for, it’s like watching Disney’s Fantasia all over again.

The "Scrap" thing is a clickbait joke thing right? I enjoy your videos, but 4x4 piece of pywood is not scrap, its a piece of lumber you buy at home depot for about 10 bucks. Thanks for great content.

Nice idea i love it

Sure. I'll go do this right now.