I TESTED More Viral Woodworking TikToks

Подписаться 1 млн

Просмотров 771 тыс.

50% 1

I TESTED More Viral Woodworking TikToks
Total Boat Epoxy - SAVE 5% : www.totalboat.com/MALECKI5
NEW SAFETY GLASSES NOW AVAILABLE FOR PRE-ORDER!!
bit.ly/ShopShades_YT
Want to see more crazy Tik Tok Videos
I Tested More Viral Woodworking TikToks - • I Tested More Viral Wo...
- I Tested The Most Viral TikTok Tools!: • I Tested The Most Vira...
- I Tested Viral Woodworking TikToks: • I Tested Viral Woodwor...
- Testing Viral Woodworking TikToks Again...: • Testing Viral Woodwork...
- I Tested More Viral Woodworking TikToks!: • I Tested More Viral Wo...
I TESTED 'Turning A FREE Pallet Into A $600 Table' - • I TESTED 'Turning A FR...
SQUIRRELLY PUSH STICKS - bit.ly/JM_SquirrellyYT
MERCHANDISE - johnmalecki.com/
PLANS - johnmalecki.com/collections/d...
SAFETY GLASSES - amzn.to/2zhWvRl
Proudly Supported By:
Timberland PRO - bit.ly/JM_TimberlandPRO
Oneida Air Systems - bit.ly/JM_Oneida
Lincoln Electric - bit.ly/JM_Lincoln
Total Boat Epoxy - SAVE 5% : www.totalboat.com/MALECKI5
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishs - bit.ly/JM_Rubio2021
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
#Viral #TikTok #Woodworking

Хобби

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 669

@baseballjustin5 Год назад

The video started getting a little laggy (for me) after you poured the resting for the Crayon Melting

@SuperVistaprint Год назад

There were several stutters before, but not as long in duration

@1986krazy Год назад

Same

@DVolk-ib2ly Год назад

Some Shots feelt like 12-24 Fps

@kindalost1 Год назад

Bad render

@timsawyer9231 Год назад

Good, I kept reloading thinking I was having issues on my end.

@deathwatch76 Год назад

The battery trick works on the basis of a balanced charge. the charger won't charge if the battery is below a certain Amperage. By using another battery, you are getting the "bad" battery above that cutoff voltage :)

@maddogshwa Год назад

Thank you! I was wondering.

@deathwatch76 Год назад

@@maddogshwa You are welcome. I found this out with some batteries at work we use for a server lift. The internal charger wouldn't charge because it thought the low voltage was a dead battery.

@pitsahat2 Год назад

Is there some risk to this method? It seems like you are basicly doing a short circuit for this to work, but I am not good with electronics that's why I am asking.

@deathwatch76 Год назад

@@pitsahat2 There is but minimal. You are just making a closed loop. Battery A and B basically swim in the same current pool. As long as you don't crosswire and keep an eye on it. You should be fine. Greatest risk is an internally shorted battery

@pitsahat2 Год назад

@@deathwatch76 ah, ok. Thanks, mate.

@ByrdTheWyrd. 7 месяцев назад

4:52 I love how as soon as it's for Annie you seem to immediately start wanting to do so much better (bevel the edges, sand down, etc)

@DV8.1 Год назад

Yes for the alligator/crocodile top please

@Stan_the_Belgian Год назад

Yes please but it does not look like an easy tik tok hack

@MrPanohead Год назад

Yes, although an original shape would be better.

@CrabCracker Год назад

Time to do the Squirrelly sculpture table.

@digit000000 Год назад

It's likely that they're pouring Tin, which melts around 450° F, not Aluminum which would be around 1200° F. The flash point of wood is around 700° F, so it's likely they're using the former rather than the latter. The finished product would look very similar.

@mikelawler2278 Год назад

Ira uses Aluminum and he does some amazing work

@ayreface1 Год назад

@@mikelawler2278 Yeah, even in the clip is glowing orange when he pours it, heh

@R__A 11 месяцев назад

Where have you fiund this info that wood has a flash point of 700f?? As I’ve found a few sources saying wood doesn’t have a flash point, only an ignition temperature… in fact flash points are only common in liquid substances…

@CarolineLurks 6 месяцев назад

@@R__A You're right. I'll add this note to it: A flash point is not where something starts burning, but will burn when you set it on fire. While an ignition point of something is a temperature where a material will start burning on its own.

@RookieLock Год назад

You should totally do one of those carving tables.. Maybe you can find the dude that makes em' and do a collab with him.. That would be sick. Looking forward to the aluminum river table, that looks wicked. That aluminum could totally be brought to a mirror finish.

@stevenbliss6484 Год назад

So awesome that people are talking about the chainsaw carved tables. Dude is from my hometown and I am living near Pittsburgh now. I would love for John to colab with him although he doesn't have a RU-vid channel that I know of. I know right where Scott,'s (the chainsaw carver guy) shop is and drive buy it quite often.

@jakesacco264 Год назад

Definitely do an gator/croc/snake table. I wanna see how it’s done!!

@noahboock Год назад

*builds a table with a croc shoe on it*

@maxmotors9497 Год назад

Me too I’m a carver and I’m thinking about how I could do it but none of the ideas I have so far seem like any fun haha 😂

@1steelcobra Год назад

@@maxmotors9497 The fastest is probably just to CNC down from a thicker slab to the rough details, then finish the precision stuff by hand.

@Foxdavid7 Год назад

The battery was somehow discharged under rated voltage so the charger is not recognizing It's the right battery thus not charging. But this hack is really sketchy as quite high current can flow between batteries. When trying to revive undervoltage battery it's better to use bench power supply with current limiter to avoid risk of having fireworks in workshop.

@MCsCreations Год назад

That's very true. If those were LiPos, it would've gone boom. 😬

@bogmaerke Год назад

Mathias Wandel has a good video on dead cells in tool battery packs. I'm willing to bet this is a similar, if not identical, situation.

@TheDiosdebaca Год назад

Well you're no fun...

@brmakers Год назад

Yeah agreed... Very high C that probably is a lot higher then this batteries can handle... Big chance to destroy the good one doing so!!! It is a great bad idea. Using a power supply should work fine!!!

@Dakarn Год назад

@@MCsCreations Even Li-ion can vent with flame. It was always fun in the tech room when you started smelling somethin' funny. lol

@billyjoemcglasson1420 Год назад

Just a heads up if you do that aluminum and wood table top make sure your wood is completely dry any moisture from the wood will cause the aluminum to explode.

@davids8493 Год назад

Very good tip that I personally would not have thought of. Saves a call to 911. Thanks.

@ObsessionChange Год назад

Am I the only one that had crazy anxiety because he didn't fill in the dot of the i in her name??? Buddy, I'm sure you did it off camera, but come on, that's killing me 😂

@mandicivan270 Месяц назад

1:53

@bazilwreckerloughead Год назад

I REALLY want to see you make one of those carved tables! The other day I tried to come up with a carpentry pun that woodwork, I think I nailed it, but nobody saw it!

@maxmotors9497 Год назад

Take that to wood by wright!😂

@BearBoxBreaks Год назад

Can't wait to see the aluminum river table. Love the videos John. Very entertaining.

@tburda823 Год назад

I love when you do the dusty lumber co joints. It shows how difficult they really are when someone with all (most of*) the tools and plenty of skill struggles with them. Definitely do the carving table too looking forward to those future videos mentioned in this one.

@TheYvesable Год назад

That´s a scam!

@dtanner7 Год назад

Be sure to message John, could be tooootally not a bot

@edubbs3528 Год назад

I agree. I loved that it wasn't by any measure "perfect" because short of someone else having tons of experience and expensive tools...they'd likely end up with something that looks like what he made. (The "imperfect" look isn't always bad either. My grandparent's old barn was made with hand hewn logs and held together with wooden pegs...it in no way looked perfect, but is well over 100 years old and solid as a rock.)

@researchandbuild1751 Год назад

Dusty co is clearly using basswood. Otherwise it would crack and splinter. Just watch the part where he chisels that angle, no wood carves easy like that except for wood made for carving, like basswood.

@johnnyb95678 Год назад

So much fun to watch you take these on. Also really appreciate that you always keep it real and don't cover up your learning as you try stuff. Can't wait to see you try the snake or gator table. Looks awesome!

@techexamined Год назад

I totally tried the battery trick years ago and it worked.. don’t let the batteries die again they will error out again.. lol.. I definitely want to see the aluminum and animal table videos!! Those would be epic.. Great video!

@bengrogan9710 Год назад

the chargers are designed to look for a minimum voltage - if its below that threshold it will not charge as the manufacturer assumes that several cells are defective if that low and they don't want to have a battery fire lawsuit when a cell explodes the bridge wires allow some charge to enter it, allowing it to then be above the threshold

@TotalBoat Год назад

Annie is so lucky! That signed turned out pretty cool for sure!

@JJE2010MO Год назад

The gator table is super cool !!! PLEASE MAKE ONE!

@Vickie-Bligh Год назад

Love the Annie sign. She's going to love that her daddy made it for her. Thanks for sharing this John.

@SchysCraftCo. Год назад

Wow that table is amazing. Can’t wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making.stay squirrely. God Bless.

@yoursweetheart85 5 месяцев назад

My boyfriend and I recently started watching your channel. We enjoy the content. Did your daughter love her crayon creation?

@Wolfdx39 Год назад

Love the Dusty Lumber Co. joints, super challenging even with the 12" radial arm saw.

@TheYvesable Год назад

SCAM!!

@ajames7139 3 месяца назад

@@TheYvesablewtf are you talking about??

@TheYvesable 3 месяца назад

@@ajames7139there was a guy posting scam messages which have been deleted by now.

@OtherThanIntendedPurpose 9 месяцев назад

somewhat related to that crayon one, when I want to do an inlay pn the top of boxes, I rout out the words or line drawing, using the smallest dovetail bit I can find, usually 3/16 or 1/8. then I fill it with solid core solder, and run over it with the soldering iron to melt it. it fills in the undercut, which locks it in. then scrape the top flush with the wood. looks really cool and is SO much easier than other line inlay methods I have done.

@MrJimmyTheJoker Год назад

Wow I timed looking for a new video well 😂 been really enjoying your stuff and getting into woodworking, thank you for all the videos!!

@c.a.g.1977 Год назад

That crayon trick is pretty cool! And HECK YEAH JOHN: make a crocodile!

@stevemiller5119 Год назад

WOW, that battery hack was awesome!!

@vee_tinymoose Год назад

Mad props for managing that joint without the fancy tools!!

@d.mat.zero6525 Год назад

yeah those table carvings look amazing, you should give it a try FULL SEND

@rfoline1 6 месяцев назад

Yes alligator yes snake….. maybe snapping turtle shell could look awesome!!!

@PhiceT1917 Год назад

The battery thing reminds me of an old mechanic trick for trickle chargers. A lot of time they won't initiate a charge is they're dead flat, so you hook one good battery up to the flat one to get some pixies dancing around, the trickle charger sees it and kicks on, then you unhook the good battery. Some kind of safety mechanism I think. But who needs safety when you've got stuff to do lol

@animationcreations42 Год назад

I always keep an old battery topped up just for this, it's too dead to use for the car, but it's enough to give life to other batteries! I also have one of those cheap and nasty battery chargers just for reviving dead batteries, it just pumps out 12V so will charge a fully dead battery. Once it's got a bit of juice in it, I'll move it over to the 'good' charger!

@bengrogan9710 Год назад

You're right it's a safety, if below a certain level it's usually a sign of defective cells (A 12v Carbattery is actually 6x2v cells) and forcing charge into defective cells can either overheat them and spill the battery acid in lead batteries or cause the forbidden Capri-sun in Laptop/Phones

@MrCoolAttitude Год назад

I don't follow much on tiktok but I def like the compilation over here.

@triciaramirez1886 Год назад

Do the aluminum table outside please ❤⚓️❤️

@tooljunkie555 Год назад

YES U DEFINITELY HAVE THE TOOLS & SKILL TO DO THE SNAKE TABLE THAT WOOD BE INSANE TO SEE! AND The crayons/epoxy works I've made like 50 commissioned signs and table tops glad to see u back!

@AHMi-ArmandsHandsMadeIt Год назад

Heck yeah!!! Make an awesome table!!🤟😎👍

@alumaven Год назад

I can't be the only one that used to melt crayons over the heater vent before geting my butt kicked on a weekly basis? This brings back childhood memories

@Kemikalgeneral Год назад

...and dipping the tips of your fingers in so you have crayon fingers? 🤣 ...me too

@Teth47 Год назад

Guy who has built a BMS here: Don't do the battery jump start thing unless you absolutely have to. It can cause unregulated currents to flow into the battery pack and, depending on the type of pack fault, might cause a very sudden fire. The reason this works sometimes is that some BMS controllers will latch off when the pack voltage drops below a certain level, and the charger won't charge a battery with a deactivated BMS. Forcing the pack voltage up will sometimes unlatch the BMS controller, allowing the pack to function again if it was just over-discharged. If there's a shorted cell, doing this may cause that cell to suddenly superheat.

@mikec2810 5 месяцев назад

Fun video that was a tough joint to make!

@monteglover4133 Год назад

A shop without a radial arm saw? Every needs one, the most versatile saw I own

@superwavess 6 месяцев назад

Pine is such a pain with hand tools. Appreciate that you're not doing everything all too perfect like other RU-vid woodworkers!

@raynobles3736 2 месяца назад

I love the rainbow sign

@aglioolio3180 Год назад

The only thing I like about tiktok is you doing these videos

@jonduncan8010 Год назад

Do the carved table but it’s gotta be full send, do a swimming moose!!

@Jiiu27 2 месяца назад

I Absolutely Love Your Videos Bru 🩵

@jakefears06 Год назад

Carved table for the win! A snake or fish coming out of water would be saweeeettt!

@Wild.Dynamics Год назад

Definitely do the alligator table video! Or collab with another channel to do it!

@sandynix5268 Год назад

Clean manual work is what makes a good carpenter - anyone can operate machines.💁🏽‍♀️

@chrism.7038 7 месяцев назад

Those reptile tables were beautiful. Immediately went to watch those videos.

@Brazos_Bait_Co. Год назад

Please make one of those alligator tables!!!!!!!!!!!! It would be really cool if carved a Gharial Crocodile!!

@DarthG33k 5 месяцев назад

For the crayon epoxy sign, you might have better luck throwing it in the oven at 200°F for about 15 minutes.

@markhopkins7204 Год назад

Gonna try the crayon sign for my grandson! Once again, inspiration is a gift that becomes art! Thanks Mr Malecki!

@edswanson3941 Год назад

Carved table is a must see/do!!!!

@larrysimmons7084 Год назад

Love these videos, love your channel. And yes please do the carving table.

@Max-ji5cg Год назад

Are bandsaws intended to throw off as many sparks as a Power ranger fight scene?

@iambear.6526 Год назад

What's with the video randomly going to 10fps?

@ravenheart1439 8 месяцев назад

Yeah dusty has joinery perfected forsure and he has ALL the tools, incredible...you John are fun to watch you have a A1 personality and have a ton of equipment lol...super good builder as well man

@jaredperlman2534 Год назад

The crayon and resin thing looks amazing

@strangequark64209 Год назад

That battery trick was cool, I need to know the science behind that.

@grigeroz Год назад

Heck yeah! You should definately do gator!!

@jeremymcmurrin6311 Год назад

I love that the guy with the giant wood shop uses the same excuse as us. Well I don't have that tool lol. Great job John

@TheYvesable Год назад

SCAM

@pmdinaz Год назад

Favorite snack of the 0311!

@ginger_nosoul Год назад

Id love a sweet desk name plate like this. Business opertunity blossoming? 🤔

@theman6910 Год назад

Fractal burning!

@mich89626 Год назад

That janky battery fix got me HART. I will have to remember this trick. Also, I’m a gators fan so I’d love to see a gator table. Also, if you need said table to go to a home I have one for it. 👍🏻

@waynehegg8847 Год назад

I love these videos, keep them coming.

@darthsirrius Год назад

Alligator in the table is pretty cool and all, but if I were you I'd do dinosaur bones. Now that would be a rad as hell table.

@Tufenuff83 Год назад

Where were those sparks coming from when you was using the bandsaw?

@Hellsong89 Год назад

4:58 "I'm going to just fill the lettering with epoxy, sand it and clear coat it" Proceeds to make enough resin to coat the whole damn thing with it... Also most likely pretty durable if you have several mm pour in gap that is relatively narrow lettering. 7:45 You essentially just balanced batteries from one to another completely empty, raising its voltage high enough that chargers safety allowed to start charging it again. How ever while this works and i have done it multitude of times with different batteries, that does not mean battery is not damaged. At very least the service life is shortened and worst case it catches on fire. I would definitely clearly label that battery as ressurected so you dont leave specially that battery charge alone unsupervised. Also when connecting the wires make sure it from same terminal to same terminal or you wreck both of your batteries ie remember right polarity + to +, - to -. You can use multimeter to figure out polarity if you cannot figure it out since that has happened to someone in somewhere.

@jpmolony281 3 месяца назад

Your editor didn't catch that Croods reference! "Sweet babbling brook"

@seb.marine Год назад

Dude Please make a snake table I love your videos and it would be fun to see you try it

@Bubbashin Год назад

As a Floridian my interest has been peaked by those tables

@carolbuzelim 3 месяца назад

Is so cute that he talk about his daughter all the time

@michaelhines1891 Год назад

Anyone notice his band saw throwing sparks all over the place?

@bjornronaldson6017 Год назад

Definitely want to see the gator / snake table and the aluminum river table!

@alfonsoPina Год назад

That last joint was a, well, a joint. You did quite well all things considered.

@MBarker397 Год назад

Dude, you have to make one of those alligator tables!!

@towboatjeff Год назад

It's crazy how ol dustylumberco makes those joints look.

@0rder666 Год назад

You schould definitely do those tops. But why is the video so shaky and low quality this time?

@territ1231 Год назад

Love your squirrelieness!

@kennethbezanson4266 Год назад

I've been loving watching the reality of these tiktok videos. Someone needs to test them out and I think you're the perfect person for the job! Only critique is the pink crayon should have come before the red for the transitional flow of colors. Beautiful concept and I'm sure your daughter loves it!

@jenniferlawson1678 Год назад

Instead of an alligator or snake, maybe you should make a family of squirrels running up the tree/table. Can’t wait to see the aluminum pour video.

@Mrmhibbert 2 месяца назад

Put spade connectors on the wires if you do it often. It's because the charger is a smart/balance charger in theory... So needs enough charge to actually recognise all the cells. Hooking them up gets enough charge for charger to recognise all cells

@nfcapps Год назад

The wood doesn't burn in the aluminum table more because it's one solid slab. That density matters.

@garrettSlingerland Год назад

Definitely do the carved table!

@steffenjespersen247 Год назад

Why not do the pour in a box with like 30cm high walls. And place dry ice around the edge. The dry ice will start melting and force the O2 out of the box. And preventing your wood from burning.

@charyaka 7 месяцев назад

The reptile table 😍

@EricAndMirna Год назад

John, I just want to say that I REALLY get a huge kick out of your videos! This one hits the mark…AGAIN! I have a couple of dead Ryobi batteries that I might have to play Dr. Frankenstein on (It’s ALIIIIIIVE!!!). Plus, my daughter happened to look over my shoulder while you were making the sign for your daughter. I now have a project to complete!

@Tatefail Год назад

Wtf is wrong with the framerate in some of the vid? D:

@choodledoodlers Год назад

Yeah i saw this too. Seems to come in and out

@Mythix2 Год назад

the b roll camera seems the have it's framerate at 12 or something

@samwheller Год назад

That battery stunt is rediculously dangerous.

@JJE2010MO Год назад

John, why was the band saw throwing sparks off that wood?????

@SenselessUsername Год назад

Why the crayon not on a relatively low temp in the oven? Less spill/blowover to clean up, less chance of wood warping as more evenly heated around. And the lazy way for those pockets at 14:00 is Forstner bit plus large dowel instead of that rectangular block?

@mfelton7041 Год назад

Loved the video. Looking forward to the aluminium attempt

@rivermallery650 Год назад

Totally make the table with the croc in it!

@Zogg1281 Год назад

Those animal carved tables look so cool and I'd definitely love to see you try to make one 👌👌👌👌👌👌

@hubertanderson7044 2 месяца назад

That really works I’ve done a few like that

@lcky1068 Год назад

I have done this, specifically on Hart batteries, worked great!

@Nick-ih5em Год назад

Yes. Make one. For sure ... 🍻🍻🍻

@dave61242 Год назад

A Great White Shark table for my meeting room would be lit.

@RokkuAni 3 месяца назад

Battery jumper method don't always work. Depends on the Bms ( battery management system) on the batteries. 40/60/80 are much harder to restore. Cable gets really hot too..

@gregdietz3590 Год назад

You can also just leave the bad battery in the charger and quickly plug in and unplug the AC cord into an outlet. This sends a little voltage surge to break up the internal crystalization that is preventing it from recharging...a little bit easier.

@randomlinuxuser Год назад

Crystalization only happens in lead acid batteries and hand tool batteries are typically Li-on. Not to mention decrystalization techniques don't actually work, as Great Scott discovered in a recent video. What you're actually doing when you quickly plug and unplug the cord is providing a little bit of charge to the battery before the battery charger registers that it's too low to charge and errors out.

@davids8493 Год назад

What's with the sparks on the bandsaw. Something doesn't seem to be set up correctly. Dusty always uses blocks to keep his chiseling square. Good video.