I Turned A Tiny Washing Machine Pump Into A Generator! 

I'm not trying to bash the video but from a scientific observation 60A at 200Vac would be 12000 watts of power??? Have you seen the size of a 10000 to 12000 watt motor??

I've made this! Lol I love it, I wonder if you could use a drill battery to charge 2-3 other drill batteries and just keep on leap frogging them.. CYCLING THEM... FREE ENERGY!!!! Then use that free energy to charge bigger batteries and run more and more heavy duty things... Keep on making the system bigger and more efficient... This could free humanity

You have to have a LOAD to find amps? What did you do? Short the wires to get current?? The meter has to be in series with the load! Or you have to have a special meter clamp that goes around the wire. But a LOAD has to be used. Otherwise you have shorted your meter. Most meters are only good for reading 10 amps.

I get the bigger picture, you’re legendary. 🚀🚀🚀 Hook it up to a overunity battery and you can run the whole house on infinite energy. No energy is created or destroyed. Only transformed.

I really like how you explained and demonstrate it perfectly 😇 Please upload another with upgraded version.

Please continue to speak about this mighty technology!

I have a similar setup with a 775 dc motor and have been trying to loop the circuit so it self-runs. I use a pwm speed controller to control the motor which is powered by 12v 6ah motorcycle batt. On the output side, I am trying to use a transformer + spark gaps + brige rectifier + supercap bank to charge the battery, hopefully to get enough juice. What you are doing is amazing replicating Gerard Morin’s pump to light up the house using RF modulation. Thank you and will also start posting my experiments on my channel soon. You inspire me!

It's not free. Unless you have the plug in your neighbors house, you are only redirecting the power.

Well young man I've seen a lot of videos similar but you have my utmost respect and dedication to your Channel. For whom that doesn't understand what you are trying to achieve is to help anyone watching this experiment to try to gain a little freedom. For those that say that you need to plug into your neighbor's power that it doesn't work that you're a scam those are the same individuals that are sitting watching TV paying $200 for their cable having a food microwave have an Uber deliver having the lawn man cut their grass the maid clean their house because they do not have the gumption to get off the couch go out in the garage or go in the living room get some electrical tape a meter soldering gun a telephone to watch RU-vid and experiment. Yes you can operate with a washing machine motor if you look at the CDR motors they put out 5500 watts on each line spins it $30,000 RPMs depending on how you want to get it get a treadmill motor and your power half the house he's working with a 50 amp car alternator his next one he's going to put a RV or a 18-wheeler which is 190 amps you hook up 190 amps to a air conditioner air handler motor which is 3/4 horsepower and it turns it 28,000 RPMs he'll be able to get $340 amps light bulbs are only four Watts you're not running 100 watt incandescent anymore okay so for example your bedroom is on a 15 to 20 amp breaker that means you can only have $700 to 1130 w in your bedroom anything else in your blow a fuse well light bulbs are let's say 5 Watts so you can have a hundred 5 w LEDs which puts 60 watts of light so you can have a hundred of those you can plug in 19 42-in Samsung TVs you can have 143 cell phone chargers that's with the TVs and that's with the light bulbs you can have a DVR ceiling fan that is 19 Watts but as soon as you try to hook up a microwave a hair dryer or a toaster oven you've went over the limit so please people let's support them he's kind enough to give us the instructions try to build something and say hey listen Jimmy now what wire goes where it works and for those who don't know any better take a potato put out in the sun for 2 days take an LED light bulb

New subscriber here!! I love your video. I believe that your electricity is running at 3khz which allows your to do all that cool stuff and it also would not be able to be measured by digital devices like that meter.

Yeah man those pumps are legendary.

Thank you for doing all this work

That is the exact same one I got, 85 W and I run it with a 775 12V high torque motor 3500-9000 RPM.

Are the blubs leds ? Whats the total watts on the blubs . This must be a high frequency motor. Try a small stove top burner.

Please explain the total wattage of your load and the wattage used to power the Dremel. It does not seem to justify the project

One thing you are wrong about is the current...i have experimented on that thing but it can only produce less than one amp...

Q: What was the energy consumed by the Rotary too as compared to the draw of all the lights. Would love to see you use Incandecent bulbs instead of LED.

The dishwater drain pump melts it cannot withstand the power generated by the vortex

This is great. I've thought about making it solid state by winding an electromagnet instead of rotating the magnet. Efficiency would be even greater.

What kind of washing machine did you get that magnetic rotor out of

I made one from the same pump,, the bushings fail in the pump, but it does work.

where do you buy those side cut's

its been 10 months now, has your electricity bill decreased?

Can you measure input and output watt

Hi, I like this setup very cool but why do you say the motor/generator will not hold up or last is it because it gets hot and melts the housing and what other load have you done with this.

Wait so with this thing plugged I got the wall, I would be able to run 240v appliances pretty much through the regular wall socket ?

What is the wattage of each of the bulbs, and are they all the same.I understand the generator has a duty cycle at 10 minutes on and 50 minutes off

Nice video! Great music too!

Gerard Morin videos

Are you able to measure the frequency of the AC produced? Probably very high and varies based on size of load.

Are they led bulbs?

That’s awesome I’m building one to 👍

Now you just need a solar panel to charge the drill motor, lol.

Now, connect the output ac to power the high speed drill and the lights

Maybe I’m missing something but running 60A through those test leads I would think you would smoke the wires I understand it was a short time but still I would think the wires would’ve drooped of getting hot maybe you’re using 10 gauge test leads.

Hi, what is all the watts added up on the lights? and what was all the AMPS draw?

that was awesome! thankyou!!!

To all those who throw names like Liar, and whatever you want, why dont you try to recreate this and see what results you get. You all slam every person out here trying to figure things out, instead if your so dam smart, why dont you show us how its done?

What light did you used? LED or incadescent bulbs and how many watts each of the bulbs?

How many watts is each bulb? It seems the Dremel thing is about 1.3a at 120v. I want to believe this I really do. I've got a Chevy Volt with a bad head gasket I don't want to fix that so I need to do what eventually I want to do anyway. The EV system is 360v.

I wanna get all the mighty legend golden stickers .

Iv know alot about the Gerard Morin RF energy pump in fact i talked to gerard couple years ago when I first replicated that device anyways I wonder how many bulbs power with it also can you try and mount them on top of a solar panel and charge a 12v battery battery maybe put a inverter to power the dermal I dont think it would loop but it might be possible

Keep up the great work!👍

What about adding magnets for the generator to produce more on less.

Couldn’t you use this, since it’s putting out a lot of amps and voltage, to power itself and then also power other things simultaneously, since the power is being stepped up so much through the gears?

Its A Gerard Morin replication. The output that Washing machine pumps make is cold energy ie just the magnetic component. Well done. you can connect a bridge rectifier and also charge a bank of batteries!

How many hours can it run contimuously ?

woww, thanks

Very interesting solution. I hope you find time to improve. Can you give information about input and output data? I guess the input is about 200W ???? Thanks.

How many watts do the drill need an how many watts does it produce

How long will this little pump motor run before it starts to heat up or burn out the plastic bearings very good tutorial

Molto bello, ma fammi capire, è possibile attaccare una lavatrice ? intendo la regge come carico ?

Where do I buy the pump?

Only free to watching

I like your fone brother your mind migh the same my mind!!!!...🙏🙏🙏.🤟🤟🤟✍.

What I belive that is multi pole magnet demagnetised crushed it to pouder then glued to the rotor magnet pouder its high frequency generator basicaly the housing is important because if it contains florine gas type in that plastic housing no friction ore try to use grafite oil as lubrication . I was wondering what wuld hapen if you add neodimium magnet but Im positive it wuld not work and that current then wuld kill you like that its more ore less harmles if you tuch those 2 terminals Gerard Morin demonstrated this. I belive wire oriantation is important and polarity if you actualy wuld swap one of those windings it will probably cause Lenz effect if you probably rewond wire in oposite direction tehnicaly you wučd rnd up with 2 more positive ore 2 more negative wire lay out. There is nothing in those light bulbs except filament the glas it self are embeded with elements who are light sensibel oreelectrons more ore less rubbish sience crap there is no gas in those bulbs if there were any gas there it wuld explode/implode emidietly . So to me that thing is high frequency generator it probably works only for light bulbs probably to make it work on biger loads the motors them self shuld posibly be reconstructed I belive toroid transformers do similar things . I still wonder what wuld hapen if you change coil sizes lenght and use diferent wires what effects might acure . Most similar motor is shaded pole motor to that thing I supose . Perhaps thermal ore microbial fuel cell might help you out . Normal lead acid baterry probably wuld explode ore do any thing ells strange staff but not what you expect it to do.

imagine if you stack the little machine

GREAT VIDEO Mr. Mighty Tiger ! GREAT WORK - My REQUEST is: when you make your next VIDEOS, can you please Do Not ADD Music or extra Sound Effects, so that us VIEWERS can experience + hear the 'load being applied to the motors and belt drives' etc.... perhaps also SHOW US, top, bottom + ALL SIDES on video while running, for those people that SAY it's FAKED etc.... my QUESTION is: 'IF' combined with the your great '30+ LIGHT BLUB VIDEO via dremel tool + washing machine pump' could both PROJECTS TOGTHER power LIGHTS in the HOME purely perpetual?

How long it last brother? ha ha !!! , i add new bearings and form new body it last longer, other why only half hour run that it. this one it come direct AC 115 or 240 it real, but not last longer, i did the same your's about 4 years a go thank s .

Someone else did a smaller version of this back in the day and most of everyone was saying that he wasn't getting more out then what he put in (no big deal). But what they missed is the fact that a hard drive motor was lighting up the lights. Anyone ever seen the inside of a hard drive motor? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fLE4RJFOSas.html

How this is different than plugging all those 30 to a house supply?

अशी उपकरणे तयार होवुन मार्केट मध्ये कधी येतील, त्याची मी वाट पहात आहे,

Charge your phone 8:40

It's a rotary converter, so what? It's hardly a secret that many motors can work as generators. The lie that's being told here by misdirection is that the power tool that turns the motor/generator plugs into the wall after being concealed under that cap. I'm actually familiar with using rotary converters for a number of purposes. The simple truth is that plugging the lights directly into the wall is always going to be more efficient. Prove me wrong.

Garbage. It's not connected to any circuit in the house." The wattage of the light bulbs is greater than the small windings in the motor. Sensationalism in seeing people are clueless about electricity. Amps. Watts. Loads or voltages. But love a light show.

Why don't you reveal the amperage produced at 120 volts and at what rpm is needed to produce it. Not to mention amps used by drimmil tool under load. Come on man quite showing off and give us knowledge. RU-vid is already to full of show off profiteers.

😂 LMFAO WTF!

Hi MR; Mighty Tiger : I watched a gain in 2024 , the real one is no one is going to belief at all, than they belief the fake one, please show up date Idea in your 2024 how to convert let it run last longer, I ran 11miles around trip on my wheel chare with this thing to charge my batteries no fuse no power inverter connected just small voltage regulator, thank for show .

And for are entertainment you wrote a book on buying a used car, but you havee never been a mechanic....for a free book you left web address.......is this you being real , or is this a slap in the face of all the viewers that watch your content and put faith in your work(same as your word) and when called out this is how you answer? Wow! As a viewer ,thats can be taken a number of bad ways...i really wanted you to prevail and show us your experaments are real and you have knowledge that backs your play...people need something real in this uncertain time...why? Just going to leave for what it is.truth shall set u free by a let down veiwer ...please make right

So you're lighting about 200 watts of LED bulbs..... That equates to about 1/4 of one horse power. What else can you do? I suspect nothing. One refrigerator alone requires 200-250 watts, a typical washer 400 watts, an electric water heater 2500 watts, a clothes dryer 2000 watts, one TV 200+ watts, an average microwave oven 1200 watts, a toaster 750 watts, a coffee maker 750 watts, a 3 ton AC unit 5000 watts......get the idea? Bottom line..... I applaud your enthusiasm, but you never connect an amp meter across any generator output like you did and while it looks good ....to really do anything of any consequence one would need (on average) a 14-18 KW generator to power a typical home. That'd be a generator 73 to 95 times larger than yours. Just sayin.

interesting experiments but unclear motivation and especially wrong measurements - you measure AC voltage and current (without load!) at an unknown frequency - will be the same as the engine speed, between 6000-30000 rpm (the usual range of these tools) i.e. up to 500 times higher than the normal frequency of the mains. no information about the load / bulbs used, no measurement results under load .. is it free natural electricity? - of course not - did you forget the cable leading to the drill?

I think you're lying. What do you think?