Тёмный

I turned water container into a working pressure tank! 

Keyto Channel
Подписаться 6 тыс.
Просмотров 660 тыс.
50% 1

🙂 The goal of this video is to-give the viewers a new idea and to showcase the capacity of an
ordinary water-container how it perfectly handle a pressure up to 50psi or more (30psi recommended for safety) with a gag as my-main goal. I don't showcase here how
the engineering behind a bladder-tank works. No deep details and information was shown
through-out the video because its just for fun.
But here in the-description I will explain all the FAQs. 🙂
=============================================================
⚠️⚠️⚠️ DIS-CLAIMER: DO IT AT YOUR OWN-RISK. ⚠️⚠️⚠️
=============================================================
This is only a video-evidence, (not a DIY) of my-successful experiment in transforming
a regular 5gallons water-container (round) into a substitute pressure-tank that can hold
a standard-household water pressure of 40-60 psi!
=============================================================
This set-up was tricky. At first glanced you can-say its not a real deal.
But if you look closely and understand everything, you will find it amazing.
You can see this thing does not-have air inlet (schrader valve) like a normal
bladder-tank. But remember that the-tank used in this project was plastic.
It has an elasticity (like rubber) unlike metals. That acts as 2 in 1, a bladder, and a-tank.
The orientation of the pump and the-tank was carefully planned to ensure
a good working outcome. I placed the-tank above the pump so that the air will remain
in-tank while being compressed. I compressed the air by closing the water out-let. And
allowing the pump with water to run while the-tank is empty (nothing but air). As the
pressure rises to 50psi the-tank begun to compressed the trapped air in-side and
making the tank's top bulged. You can see the water increases to the-tank making it
60% water and 40% compressed air at 50psi. As the pump turn's off at 50psi, you-have
3-5mins (depends on how you conserve the flow of pressure) to drop the gauge to 30psi
where the pump starts-working again. As the pressure drop to 30psi, the-tank will be less-stressed
making it 40% water and 60% uncompressed air. The pump will work about 1 min
to fill the 50psi or-less if you have-a bigger pump. And now the cycle is complete.
And there you go I hope that's clarify all your questions. Thank you for watching!
=================================================================
I don't en-courage you to remake this process for safety precaution. Dealing-with pressure
is-dangerous specially above 30 psi. However if you still wanted to try, keep the pressure
below 30psi for your safety and also to prolong your materials lifespan.
=================================================================
⮞Subscribe to my-channel for more videos!⮜
/ @keytochannel
#BuildATank #DiyPressureTank #PressureTank

Хобби

Опубликовано:

 

11 июн 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 241   
@enriquevillamizar4421
@enriquevillamizar4421 2 года назад
muy sencillo colocar una valvula de antirretorno tipo menbrana de vacum en la parte superior con orificio a la botella y el otro lado de afuera de la valvula la conecta con entrada de vacio o vasum que se genera en la segunda entrada de la bomba , la mayoria tienen esa opcion, en este video se ve que tiene esa entrada en la bomba que no la usasn, pues bueno esa segunda entrada de la bomba , es para conectar una linea que al vacum de menbrana en la parte superior de la botella, de tal manera que cuando se enciende la bomba succiona la bomba por la entrada normal y tambien crea un vacio o succion por la otra entrada que menciones ..de la bomba .. eso forzara a mover una menbrana del regulador instalado en la parte superior de la botella,, y esta a su ves por el lado de adentro forza a succionar el aire , subiendo el nivel del agua dentro de la botella.. el agua no pasara por el reguladotr porque la menbrana del regulador no la deja pasar, la menbrana es como un chupon o succionador cuando se deforma por el efecto de vacion proveniente de la entrada de la bomba .... mientras esta encendida la bomba, envia agua de servicio y sube el nivel del agua en la botella forzado por la menbrana, al apagarse la bomba, el agua se empuja hacia abajo entregando presion de agua al servicio , estando la bomba apagada, eso sucede por la nivelacion de presiones en la parte superio del tanque el vacio o vacum se transforma ahora en presion positiva, empujando agua al servicio estando la bomba apagada
@reftech1
@reftech1 2 года назад
please show the water level rising and lowering and the pressures too. That would be educational since it is transparent and everyone can see it. Also the cut-in and cut-out as the water level falls and rises. Thanks
@OhYa1337
@OhYa1337 Год назад
ya, that would be nice. video is 2 years old, probably didn't last
@vonandrechagas1083
@vonandrechagas1083 2 года назад
HI sir can i ask if it still works for daily household usage? faucet shower etc.
@sin1425
@sin1425 3 года назад
Salamat dito lods napakalaking tulong to sa mga may tubig ng puso at nakakatipid pa lods, di gaano masakit sa bulsa. Thank you for sharing this video and god bless you po. 😍
@KeytoChannel
@KeytoChannel 3 года назад
Salamat din lods, masaya din po ako na sa ganitong paraan nakaka pag share ako ng idea. Godbless din lods!
@trohn_javolta8485
@trohn_javolta8485 Год назад
I want to do sth. similar, use the water container just as air tank for my airbrush compressor. Do you know what size that adapter is? Is it 1 1/2 inch?
@gerrysmultisports
@gerrysmultisports 3 года назад
Very beautiful presentation. Good job, magaya nga. Thanks sir
@KeytoChannel
@KeytoChannel 3 года назад
Maraming salamat po! Feel free po to remake. Goodluck po and stay safe!
@ric_cresmivlog
@ric_cresmivlog 2 года назад
sir good pm..what size of the black connector your using the blue bottle of water?
@WillieStubbs
@WillieStubbs Год назад
A'ight, the correct way to use plumber's tape is to wind it in the same direction as the fitting that screws on, and you only need at most 2 full turns on most small fittings. Something 2 or more inches might need 3 turns of tape from the open end to the beginning of the threads. Hate to see what happens when that plastic degrades and ruptures under 50psi. Don't place metal objects or knives nearby or they may go flying and kill someone.
@dodznb238
@dodznb238 3 года назад
Wow..salamat po sa video nato miron naman tayo dagdag kaalaman sa videong ito..salamat sir...
@CookingTechNIKK
@CookingTechNIKK 4 года назад
Nice diy,salamat sa sharing.
@jregamey
@jregamey 2 года назад
I was thinking adding bulk head to the bottom And add a media to filter. Water goes up into check valve and out the top through filtering media
@Daus-eu9kw
@Daus-eu9kw 2 года назад
Never thought it can reached 50PSI, thanks man for sharing!!!
@otrotland5377
@otrotland5377 Год назад
hey, when the bottle is empty, the pressure should go back to the normal slow flow rate right?
@PHNOMPENHWALK
@PHNOMPENHWALK 3 года назад
Great video, thanks.
@renddyx
@renddyx 2 года назад
does it still work? How long did the bottle last?
@JuanFunQi
@JuanFunQi 4 года назад
Thank you for sharing this
@KeytoChannel
@KeytoChannel 4 года назад
You are so welcome!
@farmerhero4180
@farmerhero4180 28 дней назад
napadpad ako dito kasi nag babalak mag diy ng set up na no tank😅 ang galing ng gawa mo sir, napaka simple ang linis tignan.
@farmerhero4180
@farmerhero4180 27 дней назад
sir, pwede po ba malaman mga sizes ng reducer sa ginamit mu po sa may gallon?
@kushbitsgaming1351
@kushbitsgaming1351 2 года назад
hey i need to know how much does this weigh
@blackmass1082
@blackmass1082 9 месяцев назад
Is the meter necessesary?
@benedictcinena3452
@benedictcinena3452 3 года назад
Good job!
@AS-ug2vq
@AS-ug2vq 3 года назад
I've tested these, these bottles can go upto 200PSI before bursting, try 150PSI and your spray jet will work much better
@KeytoChannel
@KeytoChannel 3 года назад
Yes i think it can. Though I only reach around 75psi only but with no problem at all. However I don't recommend using pressure above 50psi since dealing with high pressure is deadly.
@kasunrodrigo6592
@kasunrodrigo6592 3 года назад
Please take precautions in that pressure someone can get serious injuries if wrong time on wrong place
@sayalaperbandel
@sayalaperbandel 3 года назад
@@kasunrodrigo6592 its Dangerous its what Bomb do, pressurized thing and bum
@firoalhadi9010
@firoalhadi9010 3 года назад
@@sayalaperbandel benar gan ide oke tapi saya takut pecah/meledak galon nya kalau yang awam diterapkan pada pompa besar dan di setting otomatis nya gak di perhitungkan ngasal Kalau yang paham misal saya dan agan Masih aman aman saja
@renddyx
@renddyx 2 года назад
are you sure? did you make a video?
@vancenavales
@vancenavales 3 года назад
Auto like may nakita akong lancer itlog. Thanks for the idea din po sir
@KeytoChannel
@KeytoChannel 3 года назад
Hehe..Tama po itlog nga po yun. Thank you for watching po!
@josephpesana4140
@josephpesana4140 2 года назад
How to avail this products of your's pls
@SheyRoopSantos
@SheyRoopSantos 4 года назад
nice content!!
@olivernald
@olivernald 2 года назад
The safest way is to put a relief valve 55 psi if anythig goes wrong with pressure switch.
@hanleyjacob351
@hanleyjacob351 3 года назад
May motor po ako,gusto ko i DIY water pressure para pang car wash..pwede kaya APC pra d nako kaglagay ng pressure tank?
@michaeldeviza8089
@michaeldeviza8089 2 года назад
sir kaya ba ng makina nyan humigop ng lalim ng isang tubo? o 24 feet na lalim
@ibringthelastwords1358
@ibringthelastwords1358 3 года назад
Did you adjust the pressure switch or just left it as is (40/60)?
@KeytoChannel
@KeytoChannel 3 года назад
I adjust to make it lower. 30/50
@jregamey
@jregamey 2 года назад
Don't think it will work for me. This thing goes to 60psi plus. I tried a different pressure switch with no success. So the original digital one works
@bien2t
@bien2t 3 года назад
isa kang alamat. galing bro. :D
@iagritv9589
@iagritv9589 4 года назад
Keep it up godbless
@dodznb238
@dodznb238 3 года назад
Thank you sir..very much
@KeytoChannel
@KeytoChannel 3 года назад
Maraming salamat din po sa pagtangkilik ng video ko. :)
@rghiecookingideas5992
@rghiecookingideas5992 4 года назад
Nice
@virgieesteller5658
@virgieesteller5658 4 года назад
good job!
@KeytoChannel
@KeytoChannel 4 года назад
Thanks! :)
@fhebztv5347
@fhebztv5347 4 года назад
galing nman
@firoalhadi9010
@firoalhadi9010 3 года назад
No explode bottle ?
@dcarter1279
@dcarter1279 3 месяца назад
I used a empty window cleaner boddel and it had air and water in it and it made it pressureised
@enriquevillamizar4421
@enriquevillamizar4421 2 года назад
el sistema funciona perfectamente y por seguridad,, solo con poner una valvula de alivio o disparo de sobrepresion de 60 a 70 pasi , se resguarda una operacion segura
@renddyx
@renddyx 2 года назад
lo hiciste q tanto dura el botellon? Pd: generalmente las bombas pequeña no pasan los 50 psi la de 1/2 de hp
@dennisquite7622
@dennisquite7622 5 месяцев назад
nice gagawin ko din set up yan budget friendly
@Angelo-ru6vn
@Angelo-ru6vn 3 месяца назад
Boss tanong lang po kun hindi nag over heating kahit sa garden hose or shower ang ginagamit?
@otrotland5377
@otrotland5377 Год назад
thanks
@thewelderchef
@thewelderchef 3 года назад
Wow briliant idea
@KeytoChannel
@KeytoChannel 3 года назад
Thanks a lot! Thank you for watching. :)
@TheHomePros6221
@TheHomePros6221 3 года назад
This does not have a pressure bladder inside like normal pressure tanks so your pump is still going to run alot
@KeytoChannel
@KeytoChannel 3 года назад
Nope! My set-up only starts the motor at 30psi and stops on 50psi. The motor will start again if the gauge drops to 30psi. The trick is to put the water in the tank empty. And all will work like magic. The elasticity of the plastic alone act as a bladder. No need for a valve.
@elmersackanay6944
@elmersackanay6944 3 года назад
What your saying is true this will work for a while, that being said adding a bladder will dramatically improve the service life of the tank. I’d recommend putting in some thick balloons. Old school plumbers used to use this same technique in water hammer arresters but is no longer code
@justingriffin2546
@justingriffin2546 3 года назад
@@elmersackanay6944 do you mean normal large party balloons, I thought they would eventually deflate? Do you inflate multiple balloons next to each other inside the. Bottle? Interesting I'm poor need a cheap solution...thanks in advance🌈🙏🏻👍
@galenhieb867
@galenhieb867 3 года назад
You noticed this as well. The plastic tank is a pointless exercise. It does not do the job of an accumulator. Could simply put a t-fitting in pressure line for the pressure switch. The plastic tank does nothing.
@nilamjaiswal4765
@nilamjaiswal4765 3 года назад
Nice Technology
@JoyslifeInJapan
@JoyslifeInJapan 4 года назад
👍👏👏💯
@eulinpetit-woodyear6816
@eulinpetit-woodyear6816 Год назад
Ended really stupidly! Plus these water bottles become very britle under UV light. So it would take the pressure now but would eventually explode.
@MyKillerclownz
@MyKillerclownz 4 года назад
good vid
@TheYahoogirl88
@TheYahoogirl88 2 года назад
🤣 nice!
@MarkJayCambaChannel
@MarkJayCambaChannel 4 года назад
nice video
@manoharsagunthalla9215
@manoharsagunthalla9215 2 года назад
What is the switch you fixed before the pressure gauge? What the technical name of it and purpose?
@jebbdomingo9173
@jebbdomingo9173 2 года назад
Pressure control switch
@RonaYushinTV
@RonaYushinTV 4 года назад
Astig content
@romeobundocll3247
@romeobundocll3247 2 года назад
anung hp un gamit mong motor boss??
@uyjiggo5379
@uyjiggo5379 2 года назад
3rd floor pwede po ito?
@raiu9443
@raiu9443 2 года назад
New subscriber boss, buti nkita q 2ng video mo, thank you much😁
@elenmadla5483
@elenmadla5483 4 года назад
Wow very informative 👍🏼
@ronespartero7423
@ronespartero7423 3 года назад
Boss pwede ba gamitin e yun pressure tank na 21gals?
@KeytoChannel
@KeytoChannel 3 года назад
Ung cylindrical blue tank po ba? Pwede din po cguro sa lower pressure 30psi below po. Pag mataas na kasi baka ma deformed ang hugis.
@welmultiskilledtv
@welmultiskilledtv 5 месяцев назад
Nice one lods
@dantsa671
@dantsa671 3 года назад
Lods ilang watts booster pump na gamit nio jan?
@KeytoChannel
@KeytoChannel 3 года назад
1/4 hp po, mga nasa 186 watts po.
@leilinolivero9580
@leilinolivero9580 3 года назад
Bueno el proyecto
@KeytoChannel
@KeytoChannel 3 года назад
Thanks alot! Thank you for watching. :)
@oliverburca
@oliverburca 2 месяца назад
ano po ang size ng reducer? salamat
@romaldoclarke6659
@romaldoclarke6659 3 года назад
how did u get air in the bottle
@KeytoChannel
@KeytoChannel 3 года назад
U can put air inside by forcing the motor to run while the water outlet is close. This will build the pressure inside while compressing air to the tank.
@vic_channel2869
@vic_channel2869 3 года назад
Mga ilang secondo o minutes Sir? Thanks
@KeytoChannel
@KeytoChannel 3 года назад
It depends po sa pressure na naiset nyo sa pressure switch nyo po. Automatic lng po sya titigil.
@MOTOVISION44
@MOTOVISION44 4 года назад
Very informative!
@KeytoChannel
@KeytoChannel 4 года назад
Thank you! :)
@eroltuna1740
@eroltuna1740 Год назад
Clever idea, thanks for sharing
@redwarrior4544
@redwarrior4544 3 года назад
Sir pwed po ba gamitin ang pressure gauge sa compressor na png vulcanising?
@KeytoChannel
@KeytoChannel 3 года назад
Opo pwede din po nman.
@jetblack6850
@jetblack6850 3 года назад
I turn playdoh into a nuclear weapon.
@stivi739
@stivi739 3 года назад
I've got a water transfer pump..will this work for my pump?
@KeytoChannel
@KeytoChannel 3 года назад
It depends to a kind of water pump. here in this video I only used a water booster pump with 1/4 horse power (HP). The bigger the HP (like 1/2 HP or higher) the better.
@stivi739
@stivi739 3 года назад
@@KeytoChannel ok thank u
@KeytoChannel
@KeytoChannel 3 года назад
You're welcome!
@krish-cu2rp
@krish-cu2rp 3 года назад
thug life indeed!.. good job.. subscribing
@reddiappalanaidu8106
@reddiappalanaidu8106 3 года назад
❤️❤️❤️
@jamiewong2922
@jamiewong2922 3 года назад
haha best !
@gnanarajsolomon8877
@gnanarajsolomon8877 3 года назад
How it's working without air pressure inside the tank,
@KeytoChannel
@KeytoChannel 3 года назад
Please read the video description. Thank you for watching!
@sentrytheexplorer196
@sentrytheexplorer196 2 года назад
Yes useless design. The main purpose of the press tnk is to prevent excessive running of pump and build up press The line which is going to the press tank are same of the outle valve.
@BugsVsHumans
@BugsVsHumans 2 месяца назад
Why do you still need the water pump?
@shivaKumar-cy8mv
@shivaKumar-cy8mv 3 года назад
material names bro
@KeytoChannel
@KeytoChannel 3 года назад
- 1pc 1/2 inch pvc pipe - 5pcs 1/2 inch Male pvc coupling fittings - 3pcs 1/2 inch Elbow pvc fittings - 1pc 1/2 inch Tee pvc fittings - 1pc 1/2 inch Tee (with thread in the middle) pvc fittings - 1pc 1 1/4 inches to 1/2 inch pvc reducer fittings - 1pc 1/2 inch union pvc fittings - 1pc 1/2 check valve brass or pvc fittings. - 2pcs 3/4 inch to 1/2 inch galvanized reducer (female) - 1pc 1/2 inch to 3/8 inch brass reducer (male) - 1pc 3/8 inch galvanized tee (threaded all sides) - 1pc 3/8 inch galvanied male connector (length: 2 inches) - 1pc pressure gauge - 1pc ordinary pressure switch - 1pc 1/2hp waterpump - 1pc 5 gallons round plastic water container - 4pcs bolts with nuts - 1pc small solvent can - 1pc teflon tapes 1/2 inch - Wires and electrical plug - Scrap metals for the frames - Aluminum Composite Panel for the waterpump flooring (optional, anything hard will do) - And the black plastic reducer for the plastic container (You can use anything as long as it would fit firmly to the containers mouth.)
@SergiusAron
@SergiusAron 3 года назад
Kreatif, cuma sedikit membahayakan kalau tekanan tinggi takut bisa saja meleudoss galon nya. 🤣🤣🤣
@bangherlambang3226
@bangherlambang3226 2 года назад
Kasih aja jet pump 500w gan meledak itu galon Ku iseng pernah uji coba galon le mineral itu pecah meledak gan Karena dari pompa distribusi langsung di kantor 😁🙏 penasaran saya tahan sampai brp bar dia 6 bar max SOP nya Kayak nya gak nyampe 6 bar sudah meledak itu galon Nanti kapan kapan saya iseng lagi sambil di video kalau ada piket malam Kerana itu juga ide dari rasa penasaran teman kerja saya Soal nya kencang BKN main semprotan yang bikinan dia sendiri pakai tutup botol kecap di sambung ke pipa sudah serasa mesin steam gan perih njir kalau kena tangan Maklum pusat nya air bersih sebagian kota😁🙏
@harmac521
@harmac521 Год назад
@@bangherlambang3226500w bisa meledak? yg bener om jet pump 500w maksimal cuman 4bar
@Khayatz11
@Khayatz11 2 года назад
Can you make this with a drum.
@keithameerali9474
@keithameerali9474 3 года назад
You did not show the reason for having a pressure tank and that is the amount of draw down so the pump is not on continuously.
@KeytoChannel
@KeytoChannel 3 года назад
The answer to your question is that little "Pressure Switch". It cuts the the pump power off after reaching the your designated pressure.
@keithameerali9474
@keithameerali9474 3 года назад
@@KeytoChannel I know that but the pump works continuously and a pressure tank prolongs the life of the pump. Qualified plumbers will recommend the installation of a pressure tank even a small one.
@KeytoChannel
@KeytoChannel 3 года назад
You can get minimal air pressure by allowing the motor with water to run while the container is empty. Trapped air inside the tank will compress and serve as a passive air pressure though its minimal, but it works. I only use it for cleaning so the pump will not work for that long.
@danielvelezdiaz5851
@danielvelezdiaz5851 3 года назад
good job !...what about a schrader valve,for air intake to the tank???
@KeytoChannel
@KeytoChannel 3 года назад
This one don't need a schrader valve or air intake it only relies on its water pump's power to compress air in the tank.
@virendrasisodia8583
@virendrasisodia8583 3 года назад
@@KeytoChannel झझझझझजख
@pineda33
@pineda33 3 года назад
@@KeytoChannel si lo necesita de lo contrario va a encender constantemente
@KeytoChannel
@KeytoChannel 3 года назад
Nope! My set-up only starts the motor at 30psi and stops on 50psi. The motor will start again if the gauge drops to 30psi. The trick is to put the water in the tank while it's empty. And all will work like magic. No need for a valve.
@pineda33
@pineda33 3 года назад
Y lo otro que debo comentar es que es una muy brillante idea es un crack
@WinKiling
@WinKiling 4 года назад
Astig lods
@KeytoChannel
@KeytoChannel 4 года назад
Thanks :)
@Kateandnolanvlog
@Kateandnolanvlog 4 года назад
wow
@KeytoChannel
@KeytoChannel 4 года назад
Thank you! :)
@miasavannah3711
@miasavannah3711 3 года назад
Booster pump! Bakit walang pressure gauge sa plastic tank kung kaya talaga sa 50 psi or below 4 bar. Alin mas matibay gulong sa sasakyan 33 psi lang below 40psi o plastic tank? Kung segundo lang medyo kaya pa pero abutin ng isang oras na pressurize di kaya sasabog ?
@AJTarnas
@AJTarnas 2 года назад
you didnt show the bottle filling. or the air bubble in it.
@joycerockers1540
@joycerockers1540 4 года назад
New friend here..
@andresboron224
@andresboron224 3 года назад
parang di ko nakita ung pagpasok ng tubig doon sa water container.
@mikemolito8732
@mikemolito8732 3 года назад
😂😂😂 astig nMn
@philiptolibas7120
@philiptolibas7120 3 года назад
thank for great invent
@steinchannel4305
@steinchannel4305 3 года назад
Boss magkano yan boss? pwede magpagawa boss
@jamespicardal4325
@jamespicardal4325 2 года назад
kaya ba ng 50 PSI ang container na yan?
@proganja5330
@proganja5330 3 года назад
pwede ba ako gumamit ng malaking plastic drum yung kulay blue...?? thanks
@KeytoChannel
@KeytoChannel 3 года назад
Hindi po pwede ang drum na blue. Ang shape nya po ay hindi naka design for pressurized.
@joytaltura5675
@joytaltura5675 3 года назад
Hindi ba mabasag yan sir kc container lang ng tubig ginamit mo?😊
@KeytoChannel
@KeytoChannel 3 года назад
Hindi nman po. As the moment po 6 months na ang nakalipas at ok parin nman container na yan sa bahay. :)
@nps2838
@nps2838 3 года назад
Sir new subscriber here. Mga 3/4 na tubig ba ang laman ng container mu pag nag cut-off na sa 50psi? Salamat.
@KeytoChannel
@KeytoChannel 3 года назад
Mga 60% water lng po ang laman nya sa 50psi. Thanks for subscribing po malaking tulong po yan sa channel ko. :)
@tolitzmasula8110
@tolitzmasula8110 3 года назад
Boss pwd poh bah yan sa 1.5hp water pump
@KeytoChannel
@KeytoChannel 3 года назад
Pwede po, at mas mganda din po kasi mabilis nya mapuno ang tanke pag malaki ang motor.
@super505rajasohail2
@super505rajasohail2 2 года назад
Graet
@seanandrewmagadia5249
@seanandrewmagadia5249 3 года назад
Sir update naman.
@francisnarciso505
@francisnarciso505 3 года назад
Next project is artificial pressure lungs for covid patients
@firoalhadi9010
@firoalhadi9010 3 года назад
Oke mantap juga tapi ada kelemahan yang cukup fatal Lepas sambungan nya auto jadi roket galon nya 😁🙏 Atau settingan pressure switch terlalu kuat duarrrr pecah/meledak galon nya
@SergiusAron
@SergiusAron 3 года назад
Betul gan 50 PSI itu lumayan tinggi, kalau lepas habis lah tuh meleudoss galon nya sampai ke luar angkasa. 🤣🤣🤣🤣🤣🤣🤣
@diwakarborah8925
@diwakarborah8925 3 года назад
How a normal water bottle ll work as a pressure tank without bladder???
@calvinc4926
@calvinc4926 2 года назад
Thats my question,what send back the pressure to the the pump to cut off?
@harmac521
@harmac521 Год назад
There is a thing called air over water pressure tank also called bladderless pressure tank, its made of either galvanized or stainless steel. same principle but usually the tank is pressurized with air to about 20psi and then you let the water in working with 20/40 pressure switch.
@naru2naru221
@naru2naru221 2 года назад
Nice...try it out at your risk.😎😎😎
@ayeshaaa2660
@ayeshaaa2660 2 года назад
hindi ba sumasabog yang tanke
@ricajeanlagado3563
@ricajeanlagado3563 3 года назад
sir ilang psi po ba pag naka on ung motor nya at ilang psi ung switch off ung motor?
@KeytoChannel
@KeytoChannel 3 года назад
Below 30psi po sa pag start at 50psi po ang cut off. Pero pwede nyo din po e adjust dpende sa kailangan nyo.
@ricajeanlagado3563
@ricajeanlagado3563 3 года назад
@@KeytoChannel maliit lang na bahay sir pang cr lang at kusina kaya na kaya 20/40?
@KeytoChannel
@KeytoChannel 3 года назад
Opo mas ok po yan na mag start sa low pressure para safe, kasi pwede nyo nman e adjust pataas sa huli pag mahihinaan kau.
@KeytoChannel
@KeytoChannel 3 года назад
Sa experience ko po dito mas better na solo lng po ang sinusuplyan nya na linya. Gaya ng washing machine or pang car wash lng po. Pag madami po kasi ang outlet gaya ng mga gripo mabilis din na uubos ang laman pag sabay naka bukas.
@ChristianJoyAzucenas
@ChristianJoyAzucenas 3 года назад
boss, san mo nakuha yung info nang pressure na kayang ihandle nung water container?
@KeytoChannel
@KeytoChannel 3 года назад
Trial and error lng po yan.
@ChristianJoyAzucenas
@ChristianJoyAzucenas 3 года назад
ah okay sir, tatry ko sana kung pwede sya sa air or gas mga 40psi sana, temporary storage sana nang biogas/methane
@KeytoChannel
@KeytoChannel 3 года назад
Safe nman po sya sa 40psi lng pero di ko na po recommended ang 50psi up pa if daily use. At need mo sya indoor lng at kailangan mo ng bagong gawa na cointainer talaga para elastic pa sya hnd na brittle. Sa case ko 30psi lng normal use ko sa washing machine naka supply at pinaphidan ko sya ng engine oil para d ma dry ang taas na part kasi lumolobo sya parang baloon. Try mo din po ung 2L coke plastic bottles 120psi to 180psi po capacity nya safe parin.
@redwarrior4544
@redwarrior4544 3 года назад
Sir pwed po ba na wlang pressure gauge?
@KeytoChannel
@KeytoChannel 3 года назад
Kailangan mo po para ma set ang pressure ng tama. Baka kasi masobrahan at sumabog ang tanke.
@eddiedeleon2425
@eddiedeleon2425 3 года назад
diaphragm tank, pero nabubutas din in the long run and cut in and cut out were predetermined, alam ko Sir me water sensor ngayon tankless na, late nako isang dekada mahigit
@dreamstarme9162
@dreamstarme9162 3 года назад
%)))))))))))))))
@dreamstarme9162
@dreamstarme9162 3 года назад
%)))))))))))))))))))))
@vloggersmusicchannel4860
@vloggersmusicchannel4860 4 года назад
Ayos bro..
@teukudjw7737
@teukudjw7737 3 года назад
Cool one, Poor pikachus
@KeytoChannel
@KeytoChannel 3 года назад
Yeah naughty squirtle! 😆🤣😂
@farahman
@farahman 3 года назад
Hmm
Далее
Wirtz pumps are really clever
12:05
Просмотров 13 млн
IQ Level: 10000
00:10
Просмотров 10 млн
6 SIMPLE INVENTIONS Using Recycled Materials
10:00
Просмотров 82 млн
paano gumawa Ng pressure tank gamit Ang lpg tank
22:15
3 DIY INVENTIONS
11:33
Просмотров 91 млн
DIY Free Energy Water pump / No need electricity ?????
18:46
РЫБАЛКА ДОМА
0:17
Просмотров 17 млн