I Warped The Rubrail On My Trailer! Now What?

Подписаться 108 тыс.

Просмотров 30 тыс.

50% 1

Stepdeck work continues. My new rubrail warped from the heat of welding. Installing it will not be easy.
Get Merch Here
fsctrucking.com/
FSC Speed Shop
/ @fscspeedshop512
FSC Truck Shop
/ @fsctruckshop6537
FSC Railroad
/ @fscrailroad2321
Oversized Load Detour Nearly Gets My Load Stuck! 90,500 LB Gross!
• Oversized Load Detour ...
Trouble With My Trailer Hauling 90,000 Lbs
• Trouble With My Traile...
Cabover Green APU Upgrade On Orwell.
• Cabover Green APU Upgr...
I Shut My Shop Down To Load A Truck To Denver. Chris Goes For The Ride!
• I Shut My Shop Down To...
Every Day In Trucking Can Be Your Last
• Every Day In Trucking ...
Orwell Makes An Unplanned Stop At Caterpillar Dealer. Arkansas Bound Snow Blower Truck
• Orwell Makes An Unplan...
Hauling A Massive Snow Blower To Arkansas. Welding In A Kingpin?
• Hauling A Massive Snow...
Everything Broken Before I Haul A Load Orwell Looses Power Steering
• Everything Broken Befo...
RAW TRUCKING The Non Glamorous Used Tractor Delivery
• RAW TRUCKING The Non ...
Orwell Gets MAJOR Repairs While I Was Away
• Orwell Gets MAJOR Repa...
LoneStar Texas Ranger And His FLD120 Freightliner
• LoneStar Texas Ranger ...
Police Speed Traps And Fuel Islands Vs Old School Trucking
• Police Speed Traps And...
Another Drive Tire Lost On The Road.
• Another Drive Tire Los...
Throwing Axes And Loading Up Wide Load Case Tractor
• Throwing Axes And Load...
Can We Save My 18 Year Old Step Deck Trailer?
• Can We Save My 18 Year...
Orwell Gets New Polished Aluminum Drives!
• Orwell Gets New Polish...
Massive Egyptian Fire Truck Delivery In North Carolina
• Massive Egyptian Fire ...
Schneider Truck Almost Wrecks My $1M Load Squeezing Into Tunnel
• Schneider Truck Almost...
Oversized Load And Nerves Of Steel In West Virginia Construction
• Oversized Load And Ner...
I'm Out Of Service! DOT 72 Hour Blitz Week...
• I'm Out Of Service! D...
Chapel Trailer Restoration Begins! What! My RGN Is Out Of Service?
• Chapel Trailer Restora...
I Hire A New Mechanic! Finding Motivation While Hauling A Wide Load!
• I Hire A New Mechanic!...
New Construction Forces Oversized Load Into Neighborhood
• New Construction Force...
Wide & Overweight Fire Truck. Load It. Chain It. Haul It, With An Old Classic Cabover Peterbilt
• Wide & Overweight Fire...
Why The Drama In Trucking RU-vid? My Channels Future Requires Change...
• Why The Drama In Truck...
Arkansas Police DOT Inspecting Trucks In Little Rock Petro Truck Stop!
• Arkansas Police DOT In...
Test Drive My Cabover. Is My 3406B CAT Fixed?
• Test Drive My Cabover....
The Struggle To Give My Newlywed Marine Son & His Wife An Amazing Wedding Gift
• The Struggle To Give M...
Orwell Fixed At Last! AFC Valve And Jake Brakes!
• Orwell Fixed At Last! ...
Deadhead 1,300 Miles To Fix $100 Part! CAT AFC Valve Replacement 3406B
• Deadhead 1,300 Miles T...
Busted Engine & Angry 4 Wheelers Delivering Against The Odds
• Busted Engine & Angry ...
FedEx Truck Nearly Crashes My Oversized Load. Proving Escorts Value To Wide Loads
• FedEx Truck Nearly Cra...
Damaged Caterpillar Engine Struggles In Pennsylvania Mountains
• Damaged Caterpillar En...
12 Ft + Wide Load Vs. Chicago Traffic. Orwell's Engine Fails!
• 12 Ft + Wide Load Vs. ...
12 Ft + Wide Deicer Truck To Portland Maine! Cabover Repairs Tested
• 12 Ft + Wide Deicer T...
New Aftercooler Core Installed. Coolant Still Leaks!
• New Aftercooler Core I...
A Week At Gentry & Sons IS NOT EASY! I Had To Go Home
• A Week At Gentry & Son...
Gentry Yacht Haul Vs. Atlanta Low Bridges
• Gentry Yacht Haul Vs. ...
Pilot Car Nearly Wrecked By Semi Escorting Gentry's Yacht Haul
• Pilot Car Nearly Wreck...
I Find A Mack Cabover While Delivering A Combine
• I Find A Mack Cabover ...
Caterpillar 3406B Valve and Jake Adjustment Made Easy. Tune Up Orwell!
• Caterpillar 3406B Valv...
My Aftermarket Aftercooler Arrived. It May Be Destroyed
• My Aftermarket Afterco...
Hauling This Combine Proves Complicated. Roof Opens Up & Storms!
• Hauling This Combine P...
MATS 2024 Tim Gentry & I Drag Race Stolen Equipment And Celebrate A WIN!
• MATS 2024 Tim Gentry ...
Making My Ram 3500 Into The Ultimate Pilot / Escort Vehicle! Ram AUX Switches From Factory
• Making My Ram 3500 Int...
Deadhead 1000 Miles For A Combine?
• Deadhead 1000 Miles Fo...
Orwell Looses An Aftercooler Core! Major Engine Issues!
• Orwell Looses An After...
Say NO To Driver Facing Cameras! Running In Cab Cameras
• Say NO To Driver Facin...
Did I Just Load At An Old Consolidated Freightways Terminal?
• Did I Just Load At An ...
Orwell Springs A Leak! Rear Axle And Daytons On Ford Cabover Removed
• Orwell Springs A Leak!...
Sketch Delivery In Tight Upstate NY Backroads
• Sketch Delivery In Tig...

Авто/Мото

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 116

@5iFTYHFaviation_addict 28 дней назад

Chris is a hard worker. One of the best additions to the channel and the whole FSC conglomerate.

@TheRivethead 28 дней назад

Thats going to be one heavy stepdeck.

@christopherrainville5611 28 дней назад

Big pat on the back to Chris I’ve been a half a$& diesel mechanic for 25 years and I can see that guy is not lazy and is a pretty darn good wrench. On another note I never knew how much I needed a plasma cutter until I got one.

@stevewaters9186 25 дней назад

should have given me a call I would have came over and supervised the rub rail lifting and moving!! LOL lots of hard work welding right there. Hard work makes life easier down the road!!

@davidkelley5940 28 дней назад

Good job ,good video,keep content comming,that's what trucking is all about fix on Sunday ready for monday

@idasedin4626 28 дней назад

Steve has gotten a lot done in the shop since Chris started working.

@fsctrucking 28 дней назад

We have been trying very hard to improve our situation here.

@idasedin4626 27 дней назад

If you keep up this pace, the Ford truck will soon be ready for a new life on the road.

@klugfarmsklug9323 28 дней назад

One should protect your arms from the welding rays / sun burn. I don't, but usually the under side of your arms where the sun doesn't hit it, will get burned.

@nigelhales874 28 дней назад

Just back in from Sunday roast chris very experienced engineer all so you are steve

@keneldred9030 28 дней назад

I sure am glad that you 2 got that warp straightened out- sometimes that will ruin a project! I’m sure glad it didn’t ruin yours! The trailer is coming along great ! Best of luck to you both with it! Can’t wait to see it all done! Keep up the great work guys!

@paulkula7007 28 дней назад

I miss the rusty wheel. LoL

@chrismononen663 28 дней назад

One of your best videos so far, I love to see you fabrication skills.

@zacb7427 28 дней назад

Glad you see you welding and getting stuff done the drivers that are in my area are just helpless and don't offer nothing.

@ventureout001 28 дней назад

I absolutely love your shop videos, watching you put your trailer together is very riveting!

@fsctrucking 28 дней назад

No rivets were used though...😅🤣😂

@hughstephenson2957 28 дней назад

I think he's "welded" to your content Steve!! 😂😂😂

@DavidCinelli7815 28 дней назад

Your helper knows his stuff, but he looks tired.

@truthseeker2321 28 дней назад

All mechanics look tired. My dad was a mechanic, and he looked tired all the time when I was a kid.

@davidkelley5940 28 дней назад

Service videos is a plus alot young people getting into it need to know you can service your own equipment...

@fasteddiesgarage5000 28 дней назад

Orwell is looking good

@richardkenae459 28 дней назад

CHRIS IS SO SMART AND EXPERIENCED

@shawnjarman9860 25 дней назад

My hands got burned just watching you weld with out gloves 😂, I had to replace my tailgate on my end dump, and the jeans I was wearing had a big hole at my right knee, and man did my knee get burnt from welding

@alpharomeo15 28 дней назад

This year's YT Emmy for "Best Use of a Bar Stool During A Fabrication Video" goes to Chris of FSC Trucking! Famous Quote; "Take yer time, I got this!" LIKE#950

@fsctrucking 28 дней назад

Facts

@thomasgautney5586 28 дней назад

OK guys! Love the way you Git-R-Done! Excellent video and love your content! Keep it coming!

@richardhoneywell7411 28 дней назад

Great video Steve glad to see your stepdeck trailer is coming together nicely. It's good to see Chris maintaining your trailer and Orwell for that next load. Looking forward to your next video stay safe Steve and Chris.

@eastkywelding 28 дней назад

Just another suggestion clean slag off welds with a needle scaler or 4 inch grinder with a six inch brush on it

@jeffreymartin8031 28 дней назад

Hey Steve how are you doing today my friend Iike the watching RU-vid videos they are very educational videos and keep up the good I think that chirs is doing a great job by helping you out on project lie Orwell

@maxracingteam23 28 дней назад

I like the shop vids. Can’t want to start seeing the cabovers get built 🔥🔥🔥

@edwardwilliams9874 28 дней назад

Looking good yall have a great safe blessed week 🙏. Won't be long before your using the trailer he is doing a great job he is a good asset, to ya brother be safe

@coryhoover01 26 дней назад

Gee all Chris gets is a bye 😂😂

@tabithasalb9903 28 дней назад

Awesome video 😊

@JimDog794 28 дней назад

Warped steel is a pain in the butt. Good job Steve and Chris. Starting to look like a trailer.

@maxracingteam23 28 дней назад

Bad flooding from the rain Friday morning. I had to pull my boat out of the water because the boat lift won’t go high enough 😂

@idasedin4626 9 дней назад

Chris is working hard so Steve will soon need more trucks and trailers.

@carlthor91 25 дней назад

Great work.👍👍 Best wishes from the North.

@josephbaker677 28 дней назад

My uncle had me do the same crap back in 1982. I miss him. His truck lives on. Phil Kohlloer . IT Phill

@82randyacman 28 дней назад

Hey Steve. Like the shirts.

@danielseelye6005 28 дней назад

Available in the merch store, link in description. (Do my part to help shill. 😁)

@johnmaclachlan6818 28 дней назад

Use a air line to cool off the welds to prevent warping.Just a thought.

@producerk8247 28 дней назад

Way to celebrate the fourth with those shop sparklers. 😉

@bryancondrey6457 26 дней назад

Prior to completion of the new trailer, think about taking it on a semi-shake down ride with the emphasis on the shake. Some gentle twisting and bouncing will destress the metal you added/adjusted similar to shot peening parts.

@pinepaul9920 28 дней назад

How about some closeups of your welds?

@skwerlz 28 дней назад

Kudos on welding both sides of the butt joint, a lot of amateurs wouldn't. Hope you learned the lesson in that banana of a rail, weld all the small stuff on after it's attached to the frame. I have to stress something very strongly, and it's not just a peeve. Grind out any stick weld you did downhill and reweld it uphill. Wormholes and large slag inclusions are a massive issue. The only rod you can weld with downhill is 6010/6011 because it barely has flux. 6013 has a heavy amount of flux that pushes itself into the puddle if you try going downhill. Think how strong it would be if it was swiss cheese, because it very well could be. That's a world of liability you don't want to have.

@elijames3041 28 дней назад

Welcome back Steve

@clarencewiles963 28 дней назад

Push harder, it’s going to be fine! 😊

@losgonzoshemp1233 28 дней назад

Great video Steve loved it

@nigelhales874 28 дней назад

10 hours late but great u tube

@edwardwilliams9874 28 дней назад

Good afternoons yall thinking summer is here

@jrw41069 28 дней назад

Looking good gentlemen

@sunnyray2048 28 дней назад

🍭SWEET🍭Hope you had a nice 4th Steve🎇🎉🎆🙏🏼💖👍🏻🌞🇺🇸

@maryrussell7298 28 дней назад

Orwell look’n good!!

@woody95124 28 дней назад

Good job guys!

@Carlnewman68 19 дней назад

I second that , what a great guy . Carl uk 🇬🇧

@s4brainsxp 28 дней назад

Where is that awesome girl you had some welding done for you before !!!!

@Jesse_Jessie_James 28 дней назад

I believe she was injured at her former job and think Steve said she shut her shop down.

@user-ro1ct9cc9p 28 дней назад

Brother you keep your trucks up In your shop too

@richardlong7760 28 дней назад

I think it would be a good idea to get Maggie to help you weld, if she is available.

@kapekodbob 28 дней назад

I think so too. His welds are not right.

@fsctrucking 28 дней назад

She hasn't responded to my texts. So there's that.

@ddwheelspin 28 дней назад

Fantastic! 🤓

@mikerooney7928 28 дней назад

That’s gonna be one heavy wagon…..

@70elcamino. 28 дней назад

Another great video Steve........

@kenlee5509 27 дней назад

13:35 Outside on the BAYpron.

@neilmcintosh1200 28 дней назад

Starting to look substantial again. For a while it looked almost too far gone.

@eastkywelding 28 дней назад

You need to grab the recording deevice and show us up close what's going on so,we can yell at ya on how,to do it

@barnesdrb 28 дней назад

Hey Steve just curious if you think Chris could go over how he did your dump valve on your truck? I got a 79 on peterbilt airride i'm trying to find the best/easiest way to hook it and what switch to use, ect. Would love his input on this! Not really any good guides for this out there.

@rebasmith4804 28 дней назад

Nice hair cut Chris.

@timmcdermottgetgf2250 8 дней назад

Hi FSC

@mikedc3 27 дней назад

That truck could sure use a rusty wheel in the back...

@ChrisHarding-lk3jj 28 дней назад

The way I prevent steel channel from warping when joining two lengths together is by welding a temporary rib of 1/4"x 2"x 4' steel to the face of the channel. I then take piece of scrap metal and wedge them in the center of the joint on each edge of the flange and I tack each side so when I weld the flanges the weld can't pull the flanges and twist and warp the metal. After I grind and sand you can't tell it was welded.

@brandtbecker1810 27 дней назад

Question from a non-welder here - what is the idea behind hammering the weld after it cools off??

@fsctrucking 27 дней назад

Knocks the flux off

@JanesDough855 28 дней назад

Its amazing what you two fellas are able to accomplish.

@Jesse_Jessie_James 28 дней назад

Dam Jen's dressed up like she's your boss. That's how I work underneath trailer's and semi's I use ramps. I don't use Jack's or benpack lift's for semi's. Year's ago we nearly had a terrible accident when a benpack lift just started messing up bad. Lucky we was able to get tue truck down quickly. I called benpack lift's and told tuem ti get there $#@_ out.

@fsctrucking 28 дней назад

Jen is my partner in everything we do. She may not be "in charge", but she kinda is. She performs her tasks as asked, and with motivation.

@hughstephenson2957 28 дней назад

My wife really wasn't interested in the trucking biz beyond the $$. My aunt was instrumental in my success. Even at 70 odd years old she wasn't past jumping behind the wheel and pulling loads to get the job done. And yes she had her commercial license . Had one since 1964..

@user-xk6gc8op1i 28 дней назад

should weld your pocket last on a down hand

@mikewatmough1312 28 дней назад

Hello

@justinmcclanahan6036 28 дней назад

Hello Steve,hey I was just wondering if you're going to make the back part of the step deck trailer into a dovetail so you can load things with wheels on it or just leave it as is,let me know something okay, I would Appreciate it very much if you can okay thanks 🤔

@Rick-kk4yy 28 дней назад

❤❤❤yall look so pretty in your FSC industrial work shirts.

@evileyemcgaming 28 дней назад

Yep it was my b day

@idasedin4626 9 дней назад

Don't forget to LIKE video's you watch ❤❤❤

@OffroadCpl 28 дней назад

Put the 1in lights in your siderail

@hughstephenson2957 28 дней назад

I tried that with one of my dock height trailers and it lasted about 4 months because every light was beat out of the rub rail and so I had to build brackets and inset them under the outer main rail

@shreddder999 28 дней назад

Well, sometimes when trailers have too much to drink...

@Hairie-xz7nq 28 дней назад

Welding

@jeffbronowicz3264 28 дней назад

Don't know what year it is but, that's alot of time labor material, you still have old axles and frame , after you sand blast paint your into alot of money I'd of looked for a clean used trailer, you can write it all off!! Correct?

@idasedin4626 28 дней назад

Steve mentioned that he bought the trailer new in 06/07 and hasn't used it in 3-4 years due to rust damage.

@jeffbronowicz3264 28 дней назад

@@idasedin4626 it's called updating your equipment its still an 06 or 07 when your done also if something would happen insurance claim wise it's still on 06 or 07!!!

@jeffbronowicz3264 28 дней назад

Insurance companies don't like paying today especially on older equipment I don't know how any trucks you own but I have two tractors oldest is a 17 and a 19 both peterbilt gliders, three trailers oldest is a 15 then a 19 20 I trade my trailers while there still worth good value !! My 19 I speced out paid $67.000 they offered me $58.000 to $60.000 on a trade a month ago !!! Need I say more!

@timothyabraham2228 22 дня назад

Have u considered putting a automatic tranny in orwell ? 6 or 8 speed auto ? I dont know if that would be good for what/how u haul..

@idasedin4626 19 дней назад

Will probably never happen as Steve says that anyone who can't shift a truck can't work for him.

@MjK931 26 дней назад

bells ?????

@johnsadventures6783 28 дней назад

I was using one of them big grinders one day, and it kicked back and got tangled in my shirt and just ate my belly up. I still have the scars.

@fsctrucking 28 дней назад

And the stories too. Worth it!

@michaelbaumgardner9493 28 дней назад

Good evening. Evolution makes a 15" metal chop saw, it has a carbide blade, 14" blade size. Had a abrasive blow apart, jogged the memory while watching the video. Figured what the hell.

@larryb1867 28 дней назад

You guys need a steel fabricator, what are you well still it should not move no more than a quarter inch north south east or west . Good luck

@timothyabraham2228 22 дня назад

Would a freightliner argosy cabover(with the swing out steps) suit u in what u do ?

@idasedin4626 9 дней назад

If it is older than 1999 and it is not possible to have Eld because the engine cannot handle it.

@DavidCinelli7815 28 дней назад

Why robots do a much better job of welding, they weld all joints that need to be welded.

@Leotheconstructionguy 28 дней назад

Robot my ass

@CCscott 28 дней назад

Who needs hearing protection? 🙄

@fsctrucking 28 дней назад

What?

@hughstephenson2957 28 дней назад

Eh? Say what? 🦻🦻🦻

@CCscott 27 дней назад

@@hughstephenson2957 Guess he didn’t hear me. 🧏🏽‍♂️

@ItsTheCostanza 28 дней назад

July should be American pride month.

@jrw41069 28 дней назад

Yea it's called Independence Day

@Leotheconstructionguy 28 дней назад

Obviously you don’t live in America 😂😂😂😂

@jrw41069 28 дней назад

@@Leotheconstructionguy yes I'm born and raised in America 55 years. Originally from Boston, now in Florida

@frankcarchedi737 27 дней назад

Why

@claytonprescott8345 28 дней назад

Hey Steve, I know your personal friends with Tim gentry. Please help him with his channel his live videos ain't that good and his channel is going suffering because of it

@bigredgreg1 28 дней назад

I used to follow Gentry & Sons when FSC had a much smaller channel. I commented then that Tim should see how FSC films and edits content. The frustrating part was that FSC wanted to emulate Tim because Tim had a bigger subscriber base. Thankfully FSC stayed on track and continues to grow.

@fsctrucking 28 дней назад

I am personal friends with the Gentrys. And no I am not and never "emulating" Tim. He has his and I have mine. At times we work together. But mostly we are friends with common goals and interests. He is going though stuff currently. I am his friend. I advise him and am there for him as needed, if needed. I want nothing but the best for him. This can be perceived differently between fans of our channels. And many different opinions come from that. Ultimately, my business is mine, Tim's is his. He is a friend I support 100%. RU-vid is a distant thought around a friendship. Fans will watch, or they won't. But I will be there regardless.