I Washed The Cybertruck With “Tesla’s Recommended” Dawn Dish Soap And The Results Were Surprising

Подписаться 19 тыс.

Просмотров 42 тыс.

50% 1

Coleton compares two methods of washing a Tesla Cybertruck with his basic detailing supplies he was able to bring to Austin, Texas. Tesla recommends Dawn Dish Soap, but how does Adam's Car Shampoo compare?
For more information on having your car detailed check out www.cleardetailing.com or email me at coleton@outofspecstudios.com
Find all of our Amazon must-haves here:
www.amazon.com/shop/outofspec...
0:00 Welcome
0:43 What We're Doing
6:11 Examining Before Wash
10:16 Dawn Dish Soap Wash
14:10 More Thoughts On Dawn
16:31 Maintenance Challenges
19:28 Cleaning Hood and Bugs
21:29 Dish Soap Results
24:26 Adam's Car Shampoo
29:59 Up-Close Comparison
34:18 Final Thoughts
#tesla #cybertruck #detailing

Авто/Мото

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 228

@OutofSpecDetailing 7 месяцев назад

Hopefully you all enjoy this one, I wish I would have had the ability to use a foam cannon and a pressure washer to properly wash/rinse off the Cybertruck. I still believe this test will help show the showcase the difference between Dawn Dish Soap and a Ph neutral professional car wash shampoo. Once I'm able to get a truck into the detail bay at home we will test all kinds of different professional grade snow foams! Thanks for understanding!

@mikefusco9248 7 месяцев назад

Foam cannon and rinse would be ideal, but thanks for showing!

@markplott4820 7 месяцев назад

out of Spec - Coleton , car soap is Irrelevant to Cybertruck as its mostly Stainless Steel , Saphire Glass w/ some Plastic trim. Spray on Ceramic costings are BS , and a waste of time. as are Applied PTFE coatings. HARD baked on Ceramic Armor (permanent) is worth doing , but only on Conventional cars w/ Automotive paint. I dont think you can Apply BAKED on Ceramic onto Martensitic Stainless Steel. you , should have obtained a Supply of TESLA Cybertruck wash for TESTING. I think YOU will find , just PLAIN tap water works REALLY well as its NEUTRAL pH, by LAW . and in General FREE of Large Particles . WATER is a UNIVERSAL solvent . at most you will need Armor All on Tires & Plastic trim. the Glass , automotive Wiper fluid should do the job. I would use Microfiber and 100% Denatured Alcohol to clean Stainless Steel ONLY.

@Toggoss 7 месяцев назад

Really enjoyed it. Looking forward to seeing what you learned throughout the different processes and the different products.

@solarguy4850 7 месяцев назад

Can you wax it with a regular carnauba wax? My understanding is that is how owners of SS appliances keep them looking good and spot-free.

@chailatte7343 7 месяцев назад

FYI, Dawn dish soap is also pH neutral

@DaBinChe 7 месяцев назад

People don't understand SS. For SS to work it needs to be bare without any kind of coating. No wax, no paint, no wrap, etc. This is how SS stays stainless. It needs oxygen to react with chromium and form chromium oxide which is what give it's stainless property. If that reaction does not happen the stainless will lose it's property and the rusting will be accelerated. Best thing to use to clean SS is citric acid. Citric acid will passivate SS to make it more stainless. Doesn't need it very often, I would just passivate it once a year. The rest of the time I would just use Dawn or even simple green on SS.

@mikesevgarage 7 месяцев назад

Wow - very interesting! Seems like 3 options: (1) be ok with it not being clean, (2) plan on cleaning it a LOT, or (3) wrap it.

@justonbrazda3846 7 месяцев назад

well you don't really know because nobody washes there care with soap then doesn't rinse the soap off before drying it.

@dobermanguy9437 7 месяцев назад

Your washing stainless steel I'm sure it's not going to hurt anything with Dawn dish soap

@bruceflyr7359 7 месяцев назад

As someone who lives in Utah, I really looking forward to seeing you working with someone who lives in Colorado. I will definitely be getting a lot of road salts and mud on this truck. My current truck does struggle with these.

@OutofSpecDetailing 7 месяцев назад

Agreed! I think this is going to be an issue with road salt, and mag chloride, but only time and testing will tell.

@FthePump 7 месяцев назад

Thank you for doing all of this. Much needed info.

@Radium3D 7 месяцев назад

I wash my stainless steel sink with dawn also, works great. I water it down a lot more though, diluted it's much less agressive. Also, rinsing after washing it would be interesting to see in the next video :)

@saul_bloom 7 месяцев назад

How could the owner not provide you with a proper setup after traveling so far to wash his CT? House without a spigot? I would never try to use soap without rinsing. Why not try ONR first if you knew there would be no water for rinsing?

@thomasbihn 7 месяцев назад

At least run to home depot and invest in a second bucket to fill up with clean water. Really odd the homeowner wouldn't have a hose lol.

@S.E.C-R 7 месяцев назад

Agreed… this makes no sense at all. Why even do the video at this point until you can have a hose handy. I would never just wipe it off without rinsing.

@KyleBrightman 7 месяцев назад

A couple of questions: 1) Are we 100% sure it is uncoated stainless? Does a paint meter read 0? 2) Most detailed when doing a decon wash tend to use an iron fallout remover, how is environmental iron fallout going to affect the metal and is the only way to remove it with abrasion? I’d imagine Iron X or any other similar chemical would be disastrous. Also, as CTs get into more hands there will be people to run them through automated tunnel washes. What kind of horror do you expect to see with the harsh wheel “brighteners” that are sprayed on the rockers and are not adequately rinsed?

@andersn8547 7 месяцев назад

Great video Coleton ! Never been interested in detailing - your take is simple and nerdy - love it.

@Zwikster 7 месяцев назад

Rinseless washes like Optimum No Rinse aka ONR or McKee N-914 will guaranteed work wonders. Game changers. Try it. Do it. Now! Amazing vehicle and great video!

@OutofSpecDetailing 7 месяцев назад

Will test rinse-less washes next time I have a Cybertruck with me! I’m not a huge fan of rinse-less washes, but will absolutely test. Nothing is guaranteed too work with Cybertruck as you’ll find in the upcoming videos. The stainless is VERY finicky

@65ramblerman 7 месяцев назад

@@OutofSpecDetailing Some of those can only be used on cool surfaces only, with stainless steel can be a nightmare if it dries on.

@fatboy19831 7 месяцев назад

Excellent information. Looks like it is going to be a lot of work to keep clean. Please try an automatic car wash.

@wolfgangpreier9160 7 месяцев назад

Why should i clean it? Its a work truck. Its dirty. Its ugly.

@slythecatproductions 7 месяцев назад

Fascinating video keep up the good work.

@jeromeandre4915 7 месяцев назад

Superb Coleton, thanks for sharing this feedback

@jacobheinz8236 7 месяцев назад

I just noticed the headache you will have when the wipers start juddering on a cyber truck . The windshield is huge! Man, it’s gonna be a real pain when it starts, like my M3.

@CLCIII 7 месяцев назад

I did cleaning for a while and stainless appliances were always a pain. Using lemon oil applied with a microfiber cloth left a good finish, but could be slightly marred by touching it. It looked perfect when first applied though. If, Big IF, I ever got a Cybertruck I would just get the entire thing done in PPF. As Always, May God Bless you and yours!

@OutofSpecDetailing 7 месяцев назад

PPF vid coming out this week. The results may surprise you

@jxnw 7 месяцев назад

Interesting stuff to say the least. Can't wait to see it in the actual shop!

@OutofSpecDetailing 7 месяцев назад

You and me both!

@Toggoss 7 месяцев назад

Dawn liquid is heavy alkaline or base ph value at above 8.7. As you know Coleton, most car wash soap is closer to 7.0 ph. Why would Tesla recommend such a high alkaline product for cleaning the Cybertruck?

@OutofSpecDetailing 7 месяцев назад

That’s what I can’t understand!

@moki123g 7 месяцев назад

@@OutofSpecDetailing You have to remember that we are dealing with raw metal here and not a polymer (car paint) that is more or less impervious to lots of chemicals. We are now getting into metal chemistry and etching and passivation. Dawn is designed to remove grease. Fingerprints are grease. So we have two things that to get rid of. Fingerprints and then general cleansing of dirt and grime that is the usual fare for soaps that are for polymers. Windex is a strong base at around 11 with the ammonia, so is dishwasher detergent. Bases are good at cutting grease and will do a good job at removing the fingerprints, but they don't have the surfactants that will loosen the common grime (dawn is better in this area). IPA breaks down the grease, but doesn't have surfactants to keep it suspended and rinsed off. The rust spots are going to be interesting. They will need either an acid or base to dissolve them. I suspect the best thing is going to be a strong base pre wash and then some super hydrophobic coating (ceramic? Coating) top coat to seal the pores and keep grease from wicking into the sanding marks. It'll be fascinating to see how it shakes out. I am sure there are chemists working on this as we speak. Thanks for the initial tests.

@treborheminway3814 7 месяцев назад

Dawn is pretty tough on plastic and rubber. I would keep IPA off it too.

@trevorross1311 7 месяцев назад

The front was pretty interesting,u could've still see the smudges after u wipe it.And what were those little spots on the hood.

@strangerranger2565 7 месяцев назад

I make a lot of machined parts out of 304 and 316 stainless and use Mothers Metal Polish, Barkeepers Friend, and spray cleaner called Brite Shine for stainless commercial kitchens. If you get color discolorations welding supply shops have stuff to remove "blueing" that shows up around welds. Good Luck.

@dave2329 7 месяцев назад

Barkeepers is my goto for my fridge and dishwasher panels.

@royphillips7644 7 месяцев назад

Have you used any of the items you mentioned on any of the 400 series stainless?

@DaBinChe 7 месяцев назад

No need to go get expensive stuff at the welding shop. Just use citric acid, does the same thing...probably the same stuff, other two acids which are not environmentally friendly that can be used is nitric acid and requires ppe. It is call passivation. Take it from a certified SS TIG welder.

@zacjones89 7 месяцев назад

If ever there was a perfect vehicle candidate for a drive through car wash this is it!!!

@JackOLanternBob 7 месяцев назад

Why is that?

@zacjones89 6 месяцев назад

Mainly because car washes are extremely convenient but tend to leave a lot of swirl marks in painted surfaces. The stainless could be immune to those marks from the bristles in the car wash. But the car wash likely wouldn't remove fingerprints, and would probably leave runoff traces from crevices. The car wash could be part of a routine though -- daily maintenance would be windex for fingerprints, then maybe run it through the car wash, when it starts to look dirty, let it dry for an hour or so then hit it with windex again later to remove any traces of chemical runoff.@@JackOLanternBob

@matthewprather7386 7 месяцев назад

Stainless can corrode, especially in crevices. Plastic and rubber parts benefit from protectants. I suspect a gentle car wash detergent is going to be good. And I suspect the stainless will benefit from the right kind of silicon or waxy protectant - might help with finger prints though it might also slightly change the look of the material. Another reason to use a protectant is water spotting, which all parts will have depending on water hardness.

@shou635 7 месяцев назад

Supposedly this stainless won’t corrode.

@saizn9sr 7 месяцев назад

Get a metropolitan vacuum blaster sidekick. I use it on my car to blow water out from under emblems, side mirrors, grilles and any other nook. You don’t want to spend hours washing and drying your car, only to drive away and see water running from those hard to reach places. My car is always spotless because of it. Plus you can use it to air dry your car.

@Da-King-of-Swing 28 дней назад

One more thing about Dawn dishwasher soap a key factor about it is that it doesn't leave water spots that's why it's used to clean glassware and it does not leave water spots at least very minimally and if you're drying soon after you wash it water spots should not be a problem

@kqschwarz 7 месяцев назад

Unbelievable video. You and Kyle are an incredible matchup. What luck that you were able to find each other. You are both unique experts. One thing I might suggest is that you get Tesla to give you a few Cybertruck body panels. This would enable you to do some testing that might be destructive, but would better clarify what products are best for this vehicle. It sounds like wrapping it will be the best solution for most owners. All the best.

@jamespaul2587 7 месяцев назад

No, the best solution is to not worry about fingerprints and a bit of dirt, the same way Jeep owners that actually go offroad don't worry about dirt and mud.

@joebullwinkle5099 7 месяцев назад

The big thing with dish soaps is that they have a lot of salt, which is terrible for cars.

@Josh-179 7 месяцев назад

In the case of the Cybertruck, it is rust proof. Impervious to salt.

@joebullwinkle5099 7 месяцев назад

Well yes it's stain resistant steel, not stain proof steel. Tesla's design chief's own words. Time will tell how this finish holds up, however if your used to a well kept paint job finish, I feel many will be challenged by the cyber truck's steel finish. I have one on order and after seeing this vid, I'm going to plan a PPF wrap after a thorough surface prep.@@Josh-179

@greatpix 7 месяцев назад

Actually stainless steel appliances are exposed to all sorts of things like grease, smoke, hard water stains, food stains, fingerprints, very greasy fingerprints. I really think you'll end up liking products like Weiman's SS Cleaner. US WD-40 to get off the tough spots then treat with the Weimans or similar products.

@8bajwa8 7 месяцев назад

Wonder why car manufacturers not going for frame less side mirrors like polestar. Trust me make me super happy every time I wash that thing.

@Porygon_The_Polygon 7 месяцев назад

Volvo has a patent on frameless side mirrors, or so I've heard.

@jimparr01Utube 7 месяцев назад

Curious to find out how a basic clean will turn out when just taking it through a carwash.

@whitlockbr 7 месяцев назад

How do DeLorean enthusiasts do it?

@aware2action 7 месяцев назад

An expert tip: Use Frigidaire Ready Clean Stainless Steel Cleaner, at end after distilled water rinse, should help the CT shine as good as refridgerator doors! 😂 Just as you mentioned in retrospect❤👍

@jesperekholm3492 7 месяцев назад

Hi, nice video, what about GYEON restart wash. That contains kalk/kalc remover and also iron remover . Its design to ”wake up” the ceramic coating if its old it will contain kalc and iron deposits in the coating. But l think it will solve that waterspot and runnings from the mirrors on CT, also stainless steel will get iron dots on it !?

@cowcheese1983 7 месяцев назад

what about Ceracote? would that be a viable option for coating?

@455LT1 7 месяцев назад

I would hit with stainless steel spray and wipe it down. I mean, try it first before you say it wont work. Or hit it with some degreaser first then a stainless steel polish.

@warnerwinborne 7 месяцев назад

Best stainless steel cleaner? Bar Keeper's Friend, hands down!

@dave2329 7 месяцев назад

u beat me by 4 minutes. lol

@MikeHeller 7 месяцев назад

Is the leading edge of the tonneau cover messed up?

@Da-King-of-Swing 28 дней назад

What if you're not planning on wrapping the cybertruck or putting any kind of ceramic coatings on it whatsoever wouldn't it be a good idea to wash it with Dawn soap? Also Dawn soap is used by professional window cleaners and is also safe on many tiles as well as wood floors I think it should be safe on stainless steel

@scott_cp5902 7 месяцев назад

Try to use "Barkeepers friend" in a spray bottle format. Works on hard to clean Stainless Steel Pots. I would apply it after your initial wash and dry

@Noaixs 7 месяцев назад

Are there melamine sponges in the USA its great to clean surface like this even only with water. I think with material like that you can use products what are more aversive to the surface and don't use strong chemicals.

@65ramblerman 7 месяцев назад

Where I work we just use Dawn dish soap to clean stainless steel tanker trailers. Use Jungle Jake 1:5 to remove bugs, grease, hydraulic oil.... Over time there will be a rust halo that forms from the minerals in the water. There are cleaners that do remove those deposits. You might want to go talk to a semi trailer washing station and get some advice from them. Also looking at that, there seem to be residual oils from the manufacturing process that may need to be stripped off. IKD if borax would help with that or not. Could experiment on old cheap stainless steel pans,

@GregOverland 7 месяцев назад

Curious what DeLorean recommended

@drivefast996 6 месяцев назад

Great Video!

@Da-King-of-Swing 28 дней назад

Rather than more car shampoo as you suggested in this 6-month-old video I think you should dedicate an entire video to Using Dawn soap with all your shop equipment. Much more Dawn soap with water and high pressure rinsing I think we'll do wonders if done in your shop

@RonaldAsselstine-si9jg 7 месяцев назад

Try one cup vinegar to 10 gallons water I use it it clean chrome stainless sinks and pots

@royphillips7644 7 месяцев назад

How do they clean the SpaceX rockets?

@Mobile_Dom 7 месяцев назад

need to get one of these down to Florida to get DYC to dip it in some wild colour

@Bruh4reel 7 месяцев назад

I'm glad that fingerprints do not bother me. It adds character to the cybertruck. It is not a problem for ME.

@silveradodedel 7 месяцев назад

How are DMC DeLorean cars cleaned/ washed?

@Da-King-of-Swing 28 дней назад

If you had a high pressure washer an obvious access to water I believe the Dawn soap would have done a great job

@larrysing 7 месяцев назад

CarPro Descale is very similar to Dawn - it even smells like it. It's a pH of 6 (ranges 4.5-6.5) so if you want to use a "car-specific" product & keep it "chemically similar" to Dawn, that's your chemical.

@detailersroadmap 7 месяцев назад

...its gold coloring from the concrete below. It's the reflection (23min)

@jbak6892 7 месяцев назад

What house doesn't have a water spigot and a garden hose?

@fearsomebeard4290 7 месяцев назад

Can one ceramic coat stainless steel?

@dave2329 7 месяцев назад

Barkeepers would work well for stubborn spots. use a sponge and the powdered type of Barkeepers and a bit of water.

@ssing7113 7 месяцев назад

Wouldn’t work well but for a full panel. Would show where you did spot touch ups

@kylecordes 7 месяцев назад

It's great to see an early initial look published! But I feel like the results really aren't all that meaningful without even an ordinary garden hose available to rinse off before and after. I'm sure that was unintentional - if you had realized ahead of time a quick post on Twitter probably would have found a dozen volunteers in Austin to use their driveway and hose!

@CamGaylor 7 месяцев назад

Clean it with ballistol gun cleaner lol that's what i clean my stainless steel guns with 😂

@deplorablechump8758 7 месяцев назад

Run it through automatic car wash

@Da-King-of-Swing 28 дней назад

If you had a high pressure washer an obvious access to water I believe the Dawn soap would have done a great job. If you research professional window cleaners almost all will recommend Dawn soap

@GreenBlueWalkthrough 7 месяцев назад

I would look iinto how people have been washing Doloreans, Resturant Sinks and bearmetal(It's aulmanum but still unpainted.) planes which I know is still different but still their is likely knowledge to be gained.

@omarastacio3939 7 месяцев назад

Since it is more resilient, will a standard car wash be helpful? Never as good as a good handwash but may be an option that would not damage the "paint". The true solution is probably to wrap it.

@hedleypepper1838 7 месяцев назад

Clean or dirty is just clean or dirty, doesn't matter if its stainless steel , paint , or vinyl it's all the same. Just like some colours show the dirt more. Commercial Kitchen staff know how to clean stainless steel its used on almost all of the equipment and even walls 😊

@royphillips7644 7 месяцев назад

That is 304 stainless that they’re cleaning in the kitchens. Not really the same same animal.

@NahM8 7 месяцев назад

Someone will undoubtedly try to mirror polish it lol

@variablenine 7 месяцев назад

While an interesting idea I doubt a mirror polish would look good. The steel panels aren't perfectly flat and the foggy finish hides that well. A mirror finish would have very warped reflections. That's why the matte black finish looks so much better than the gloss black finish.

@mikapeltokorpi7671 7 месяцев назад

Back quarter: those dots are most likely rust (stainless steel corrodes bit differently to other steels). Those streaks could be from marks from steel sheet rolling machine or from steel panel press, but I cannot say it for sure. Front: bug carcasses are acidic. So rust freckles incoming. Yes, it is impossible to have constant shine and look without sanding the whole vehicle as the last step. If a door (or any other panel) looks different, it has been replaced after that step

@douggolde7582 7 месяцев назад

Need to passivate with an acidic cleanser such as Star San or citric acid such as Citrasurf.

@johndunnington 7 месяцев назад

Honestly, stainless is finicky as hell! With the elements that a vehicle deal with, I suspect a nightmare. Even OCD people struggle with keeping their stainless appliances dialed in. And they're inside! 😳😳😳

@dobermanguy9437 6 месяцев назад

Good job man good try you would think by now this truck has been out a while the prototype and all they would have figured out the best way to clean the steel I'm very surprised that everybody's experimenting I'm surprised Tesla didn't already perfect this but I do know you know it's stainless steel but still it's stainless steel good job

@thedownwardmachine 7 месяцев назад

I once used Dawn dish soap as a personal lubricant. NEVER AGAIN For the next week, my junk looked like a piece of fried chicken.

@JackOLanternBob 7 месяцев назад

Thank you for sharing

@Shiftheads 7 месяцев назад

I call it the foam cannon

@thedownwardmachine 7 месяцев назад

Let that be a cautionary tale. Always use Adam’s car shampoo

@Turbo_Todd 3 месяца назад

Tesla website says "use denatured alcohol to remove tar spots and stubborn grease stains, then immediately wash the area with water and a mild, non-detergent soap to remove the alcohol."

@douggolde7582 7 месяцев назад

Go talk to a brewer and see how they clean stainless steel.

@markplott4820 7 месяцев назад

its important to remove fingerprints Quickly as human hands are ACIDIC and will burn into Stainless Steel.

@adamd4137 7 месяцев назад

Super interesting. Clear Tesla was building a truck and not a showpiece. Knowing buyers would want to clean these, surprising they didn’t work with an automotive products company to develop a range of cleaners / polishers etc. prior to launch - so perhaps the tough truck look is intentional, or Tesla concluded there are not too many consumer friendly (safe) ways to achieve the appearance perfected for painted panels. Definitely going to be up to 3rd parties to formulate new solutions, but will demand justify it for them.

@boilerdown1 7 месяцев назад

It is quite startling to see Coleton using Dawn to wash a vehicle, is it Halloween?

@graceshotdown 7 месяцев назад

This is the video I think all of us were waiting for! 😊

@MARKXHWANG 7 месяцев назад

Thought u r washing a space telescope

@johndavis7257 7 месяцев назад

Here to fine out how to keep my refrigerator clean 😜

@vicgarbutt3310 7 месяцев назад

maybe it needs a creme cleaner applied with a rotating buffer pad?

@Boomtendo4tw 7 месяцев назад

They used gasoline on the delorian to clean it and uts also stainless

@nmanchin 7 месяцев назад

Seems like a perfect opportunity to test a rinseless wash since that was the procedure used.

@phil538 7 месяцев назад

"deep stains", "grime". It's brand new! If I had one of these things, I'd never clean it. Ever. What you need is a nice protective coating of dirt and hope the rain doesn't wash it off.

@greatpix 7 месяцев назад

You should test products meant to clean stainless appliances. BTW, I had an appliance repairman say I should try WD-40. I did and it worked ok. Apply with a microfiber cloth then buff with a clean microfiber cloth. In both cases always in the direction of the metal's grain.

@hedleypepper1838 7 месяцев назад

Noooooo wd 40 nooooo get it onthe glass your gonna have issues 😮

@brbeyer 7 месяцев назад

Have you asked Delorean owners how they wash their SS cars? Lot of history with those vehicles.

@scanspeak00 7 месяцев назад

I scoop of cocaine in a bucket of warm water.

@kfk256 7 месяцев назад

What about Weiman stainless steel cleaner and polish?

@OutofSpecDetailing 7 месяцев назад

Stay tuned.

@StayConnectedEV 7 месяцев назад

Ask yourself, why did Tesla rope off the Cybertrucks and not allow customers to sit in it? The car will look 100% horrific each night from the number of fingerprints. This is a huge problem with oils in the hand.

@OutofSpecDetailing 7 месяцев назад

Next video is testing the best products to remove fingerprints! Stay tuned, and yes, it’s a massive issue on these trucks.

@StayConnectedEV 7 месяцев назад

@@OutofSpecDetailing sounds good! thanks!

@sanfrediable 7 месяцев назад

go look at the sandy monro tour of the manufacturing process. On the doors they incorporated another metal I think it was copper

@johndavis7257 7 месяцев назад

Here to find out how to keep my refrigerator clean from the cleaning master 😜

@degnarius 7 месяцев назад

0:28 “First off we need to get it clean.” I honestly cannot see a difference between before and after from 10 feet away.

@kn944 7 месяцев назад

Just like SS fridge...coat in olive oil to eliminate fingerprints. Learned this trick from a DeLorean owner.

@dobermanguy9437 6 месяцев назад

WD-40 might work good maybe worth giving it a try

@evielknievel4972 7 месяцев назад

Elon didn't give you a spray of Stainless Steel Appliance Cleaner ? The refrigerator one works great man . Try it out.

@ericn3221 7 месяцев назад

My OCD was off the charts with the soaps left to dry on the black trim. Enjoyed the video though!

@BigBearHostel 7 месяцев назад

I don't clean my truck now. Why would I start with the CT.. Trucks look better dirty.

@S.E.C-R 7 месяцев назад

I’ve heard Tesla was using stainless steel refrigerator cleaner. I’ve never heard the dawn dish soap thing!

@twosawyers 7 месяцев назад

Dawn gets a bad rap but this stuff is not nearly as harsh as people say it is. Dawn has many different strengths to their products, and the normal standard blue bottle dawn is very gentle. On anything for that matter. I will not use platinum Dawn or if you do you platinum Dawn dilute it with more water than the original. Never use dawn Powerwash on a normal car finish, but I think it’s perfectly fine to use on stainless steel products.

@beetle5000 7 месяцев назад

You need to use cyber soap!!

@darkwhorse 7 месяцев назад

The first thing I would apply as a test after a wash would be WD-40. It works when I apply to our stainless steel in the kitchen and the garage. Also. I LOVE the smell of WD40

@austinbentley2760 7 месяцев назад

So a rinseless wash on this would be ideal

@OutofSpecDetailing 7 месяцев назад

Definitely would love to test a full Rinse-less wash process. Next time I have one, I will! I really feel traditional foam cannon, contact wash, pressure rinse is the way.