Icengineworks NPS Turbo Manifold Modeling System - Trick-Tools.com

Подписаться 57 тыс.

Просмотров 11 тыс.

50% 1

In this video, Brycen and Victor take you through the steps of using the Icengineworks NPS modeling system. The Icengineworks NPS Turbo Manifold Modeling Systems allow you to simulate a manifold using plastic blocks built to specific radii and OD which replicate the common practice of cutting and welding stainless cast pipe elbows. These blocks can be indexed and rotated to ensure proper fit prior to cutting and welding. Two kit sizes are available.
Dramatically simplify turbo manifold design and fabrication with these turbo manifold modeling blocks from Icengineworks! The NPS Kit works similarly to the header blocks by simply snapping together, with the ability to rotate to create the exact radius necessary for your compact turbo manifold design. Blocks come in a variety of centerline radii and degrees to replicate common stainless cast pipe elbows. Each block features index points to aid in block rotation and obtaining the perfect radius for your custom manifold. Once a design is made, metal parts can be cut and welded to replicate your model.
Click here to see on Trick-Tools.com
www.trick-tools.com/index/pag...
Trick-Tools.com
Sales@Trick-Tools.com
1.877.VAN.SANT

Наука

Опубликовано:

17 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@RonCovell 3 года назад

What an elegant way to model complex tubing structures!

@weebparadisecollection3691 2 года назад

i agree and it save a lot of time

@cagedruss Год назад

Looks cool, good luck reaching no.5 plug.

@mattsmith4496 3 года назад

Nice! Much easier than trying to hold everything together with tape, hose clamps or tack welds! A couple things to consider that might make things easier... - There are short radius 45 degree ells available for purchase, but there does not seem to be a provision for this bend angle in the system? - Include the center line length on the 15 and 30 degree angle blocks for quick reference so you don't have to do the math - Include the angle on the 1" center line blocks for quick reference so you don't have to do the math

@beachboardfan9544 3 года назад

Why are ppl using schedule 40 pipe for exhausts!? That shit is so heavy! Do these kits match tubing dimensions too, or is this specific to using pipe, aka, the wrong product for the job?

@TrickTools 3 года назад

It is actually schedule 10 pipe material and this is intended strictly for turbo manifold applications where exhaust temperatures are higher and can actually burn and melt through thin wall tubing. We sell kits for using standard thin wall tubing material in standard header and exhaust applications as well and similar videos for those kits will be coming out over the next few months.

@beachboardfan9544 3 года назад

@@TrickTools Go inconel if your exh is burning through, heavier is never the solution.

@TrickTools 3 года назад

Icengineworks has spent a lot of time and R&D to see what builders are using and why. Part of the reason for builders using the cast pipe is that elbows are available in centerline radius that are far tighter than what is capable for the same OD of mandrel bend tubing therefore helping builders when space doesn't allow for larger radius mandrel bent tubing. If you would like more explanation on the use of the cast pipe we can put you in contact with Victor who is the engineer, designer, and owner of Icengineworks. let me know

@beachboardfan9544 3 года назад

@@TrickTools Can Victor tell me the consequences of using tighter radius bends in a system thats supposed to be optimized for flow?

@TrickTools 3 года назад

He sure can!